just benchmark again today, and got a nice sp1m run

good start to your ocing career

well i go extreme, i use passive for 3.48Ghz lol... 74 degrees is not bad, i did not say its good for load its expected... well i am an optimistic guy, so dun mind me

Pentium D uses 90nm Architecture
Pentium Dual Core uses 65nm Architecture

TDP for both are totally different, therefore temperature limits are also different.

i stand to be corrected then. Thank you:)

yes, smithfield = 2*prescotts and presler = 2*cedar mills. oh yes, cedar mills are 65nm procs

i guess one of the differences is the Architecture and the other difference is also the TDP. Pentium D, TDP ranges from 95W to 130W meanwhile the Dual Core TDP is around 65W..

how can u say that, pentium D 8 series are 90nm processors... they are very hot...

e2180 is a 65nm core architecture proc with a 65W tdp.. no way e2180 can outbeat Pentium D on heat....

u cant generalize that pentium d is the hottest, it goes back to TDP. If the TDP is high, then u would expect it to be really hot. And also how much cooling u put and how much u overclock it.

switch back to e21 talk by the way, has anyone bought an e21 lately... i would like to do a comparison of e21 over the years.

wrong place to ask bro. Btw, how about the timings i told u about bro.. pm me.

3.3Ghz is alright, try 3.6Ghz

is it sp32m stable?

try to get it stable in sp32m bro by the way, its good start

keep going dude... i think u have a good proc dont give up

945 chipset.. well 1 orthos set is enough. Its what you set in the orthos, thats important. Maybe a 3rd party cooler might help

thats nice... hopefully its 3.6Ghz or more

not high la, just normal noob oc only. Suggested load temps around 60 degrees. U can go over 60 degrees, not an issue.

looks like hmm its not bad, but i got 16.8 seconds on ~3.48Ghz

Can do better than that.



16.875s on 3.48Ghz

I have done 16.844s but too late it hang lol..

correction = crucial 10th

nop i am using the good ol' dominators which have d9 in em

well i have done 4-4-4-8 on 1100Mhz... can do better than that but the proc walled me coz of cooling issues

---

Added on August 4, 2008, 11:58 pmanyways has anyone used a foxconn mars with e2140.. it seems to wall the processor at 380Mhz... on fsb..

This post has been edited by a1098113: Aug 4 2008, 11:58 PM

e2140 440Mhz wall on ip35e walled by heat...

aircooling, at 1.62V idle 40+ i think..