QUOTE(cyberloner @ May 10 2008, 05:22 AM)
it is same as i manual brake my motorcycle SS last time... when play with disk brake... i brake and release and brake again and release a few times... it really shorten the distance... by hitting brake directly...
car is also same... no abs... if u hit the brake directly... the car will move.... quite a far distance...
with abs... it is auto hit and release the brake...
see how the brake work
you are also right about control the car when braking as well... maybe i was wrong..
ABS, it wont shorten the distance, it is still the same. The only thing that ABS works is, when you do emergency brake, tyre will get lock and it will cause your car unable to control when you turn the steering, it will still go straight only. With ABS, it will prevent this to happen, you'll feel that your tyre is lock but it allow the tyre to move, you'll feel it because the tyre is hold by something and it is forcing it to move, so when this happen, you turn the steering and you still able to control the steering.car is also same... no abs... if u hit the brake directly... the car will move.... quite a far distance...
with abs... it is auto hit and release the brake...
see how the brake work
you are also right about control the car when braking as well... maybe i was wrong..
With ABS, when tyre lock, you turn the steering, your car can be control.
Without ABS, when tyre lock, you turn the steering, your can will go straight only.
My friend tested with his camry on a flat road and I was in the car, because I do not understand how ABS works
QC, Perodua and Proton do not have any difference. You can say Proton have a same issue for over 10 years, is Perodua release that long like Proton? As I said, Perodua does have a lot of QC problem like Proton, just because it release later than Proton, everyone thought that it got better QC.
Window problem, I'm not sure. But common problem in Proton, sound here sound there, it is happening on Perodua too. If you say it is just some cars having this issue, Proton also same, not everyone having the problem. Proton use spoilt parts on the car, yes Perodua did the same thing as well to cut cost, took back to SC for fix? They just use glue like what Proton did to some customer. Some SC might not having this issue? Yes, some Proton SC does fix the problem without this problem. And haven't mention door knorb problem that my friend's myvi.
Conclusion is, Proton and Perodua, both having the same QC. You are lucky to get good QC perodua, so do I that lucky to get good QC proton.
May 10 2008, 10:59 AM

Quote
0.0295sec
1.06
6 queries
GZIP Disabled