really long time din comes up d...
already V6 11 pages.. =="
guys still vr active ya~

@overclockalbert
when i training in penang i had use the penangfon b4...still new establish when i training last march. when start subscibe it the line is vr unstable tat time.
when i playing blue server that time the game spike(lagging periodically) like hell...
then after about a week is steady d...
then...i download 5Gb anime.....i start download when i go work...when i come bec its done~~

This post has been edited by blonely: Mar 6 2008, 04:34 PM

@pengster
last time when my mobo come, the P4P800,
when i installed the P4 2.8 533FSB, it also cant work...
still cant figure out wats the problem....

as what i know from my fren is that the old mobo will need to load the sata driver into the bios to enable the mobo to recognize the sata HDD
but that is for quite old model's mobo wor...the recent model also need to load it?
---------------------------------------------------------------------------------
jz do some OC on my com and primed 2 hours no problem...plan to get higher...
Vcore=1.60V
DDR reference=2.85V
timing 3 3 3 8
230Mhz x 15 = 3.45Ghz
ratio 1:1



processor temperature around 32°C ^^

This post has been edited by blonely: Mar 7 2008, 06:24 PM

P4P800
as in my signature~

@pengster
mayb should change the HT setting? my proc aldi sold that time...
not chance to trace the problem d...

@fylon
while im putting Auto for the Vcore, wat i observe in my Ai Booster is 1.58V
and my ram voltage is just 2.65V
if Auto for ram voltage, then it wont even even go over 225Mhz.

@kabu
jz try 3.6 with 1.6V Vcore and 2.85ram voltage..
but cant load into window. restart when start to loading...zzzzzzzzz.....

@fylon
i din loosen.. =P
yesterday i asked khaisiong about the voltage he set...
but wat he told me is his presscott normal voltage will be around 1.40V...so he set abit higher..
coz my proc normal voltage is around 1.58 i thought the 1.6 is ok...
because before i din push my rig...so i jz leave it default setting...
thanks for the remind...
then around wat voltage should i set it?

@albert
my proc not 30 cappers...
and the ram.... i will try lower the vdimm see can hit higher or not..
thanks...

---

Added on March 8, 2008, 12:58 pm@fylon
just try to lower the vdimm and vcore for the 3.45Ghz
when i lowered to Vcore 1.575 and vdimm 2.75,
even with 3-4-4-8 ram timing
it restart when start loading window...
then i set it to Vcore 1.575 and Vdimm 2.85
it restart when loading window....
then i set it to Vcore 1.600 and Vdimm 2.85
it can load into window...with 3-3-3-8 timing.....
no idea wat should i do....

the memory acceleration mode..we need to set it enable when OC?
and the memory refresh rate and the memory.... forgot 1 more is wat d..
and performance mode. auto, standard or turbo?


This post has been edited by blonely: Mar 8 2008, 12:58 PM

Now with
Vcore=1.6
Vdimm=2.85
Vagp=1.80
timing = 3-4-4-8
i can load into window with 233Mhzx15
but restart while loading with 234Mhz x15...

@fylon
no...all is restart while loading the windows...
about the 5:4
how should i set it? hehe...

hehe....
jz try out the setting....
butt the ram frequency have to set it auto then it can load into windows
with 234FSB... 3:2 ratio....
if i fix it to any frequency i cant load into the window with 234FSB...
the timing still vr lose... 3-4-4-8...
guess i cant go any further aldi....haiz....
yes...the tuniq tower really satisfy me...it keep my proc around 32°C...

---

Added on March 8, 2008, 3:51 pm@pengster
not sure about it.....coz really dunno wat happen d.....hehe
mayb jz like u say is incompatible....but when checked in the compatible list the proc last time i use is also in the list...
so really duno wat happen back then...

This post has been edited by blonely: Mar 8 2008, 07:43 PM

for FSB234 i think cant be tighten d....
haiz.... cant go any further....
since fylon said that 1.6V Vcore aldi dangerous level....
scare to pump in anymore d....
weird thing is my memory frequency let me choose are
266, 320, 400
there is no 333 =="
then if i put auto, load in window with FSB234 and check in cpuz,
the DRAM frequency is 156... 3:2 ratio....
for FSB233.... yes... i can get with timing 3-3-3-8...
but havent prime...just it can load into window...so dunno yet...

yalo...i never even heard....zzzzz.....
the memory acceleration only hv auto or enabled option....so i put auto lo...
the performance mode was set to turbo....will try later...
the Vcore...haiz....normal aldi 1.58V...
zzzzzzz....haiz.....
i hv 1 8cm fan blowing northbridge, 1 12cm fan blowing ram...
2 8cm fan(coupled) exhaust at the back, 1 8cm fan blowing HDD, 1 8cm fan suck out the air fr power supply.... actually the temperature quite cold inside..

wah....i scare ler....
i'm almost reach the due date of my thesis....hehe...
1.7V i think is too high...
i'm OC while i do my thesis til too sien...hehe....
erm...my proc jz 32°C.... izzit not cold enuf?
i never see it increase much... only the RPM of fan will change....

now stay at 3.45Ghz....but ram timing tighten to 2.5-3-3-7...
jz now run 3Dmarks with setting
3.45Ghz, timing 3-3-3-8...
01 - - - 18967
03 - - - 11.9k++
05 - - - 6.6k++

@fylon
the 3Dmark... i also wonder why.... T-T

for FSB230 i had prime it before.... i think i will stay for a while....
finish works 1st....hehe....

@kabu
how to stress the proc? i mean make it load....
even prime i jz saw my ram run 1.9Gb..... =="
the proc jz run at about 0%-10%...

@fylon
ya....is running 2 sp2004.....
havent try orthos... will try later..
my GC ar....i also thought it will on par 76GT....
i want to OC it....but not sure the safe point....

when using ATI tools, or riva tuner...after we OC it, if we din run the software at startup it will reset bec to default?

@ray
haha....wat do you mean not good in overclocking?
heat? or core is fixed?or the capability to clock?

@hero
tuniq tower 120....hehehehe....

hoho...mine also blacky mobile gear mouse nia...and a ultraflat logitech keyboard lo...
me also consider in poor club d...

i only use storm codec now....all media file so far i encountered all can be opened!