how long your poe setting? means how many meter the cat5 cable from your router and power supply. I can mod one for you.

bro, is your "RPSMA to RPTNC converter = RM 29.00" is no lost converter?

Yeah no lost

You're selling Linksys WRT54GL ?
Can you recommend me which set-up is good for a small office ? Range would be upstairs , downstairs.

Besides that , What's the differences between DD-WRT compare to Tomato ones ? I'm totally blank with all thest.

Budget wise , The cheaper the better.
Thanks.

New stock for WRT54GL is coming this week if you need one pls pm me

do u have one that can boost aztech wifi router??

Yes you can use that 7dbi antenna omni directional :-)

Looking for solution, please check the picture, I need to set up a link between these 2 areas, NO LOS, straight line is around 400-500m. All the buildings around the area are almost the same height(include those trees) but the roof is hard to reach so if possible dont wanna put antenna top of the roof(need to get ppl to climb up a 3-4 stories high building is extremely dangerous).

Any suggestion for wat hardware I need ? Going to have Wireless-N routers at both site but not sure for antennas. Thanks.

Not recommended to use N-router for long range point to point wireless setup. The link bandwithd won't be significant and N-router need to use 2 antenna. Normal G-router (dd-wrt) with panel antenna should do the job. But, NO LOS would be difficult to setup. Might need to do on-site survey first.

I agree with what my partner azmi said on site survey would do the job . From the diagram the best way to put the antenna is on the roof. A directional antenna between those two Point A to Point B should be enough using directional antenna from A to B. We can do the assessment if you are in the Klang Valley. If you like to DIY do provide more info. We can supply the hardware.

- the location is in kepong, very near to jusco kepong

May I know what is the estimated cost ? I am afraid hiring professionals to perform the job might easily exceed my budget.

What kind of information I need to provide if I need to DIY ? I tot I can use some antenna that would a bit overkill to penetrate those building and trees in the way ?


This post has been edited by narf03: Sep 15 2008, 12:21 PM

If the building or trees that blocked the line of sight are real solid, (i mean building with lots of solid wall/metal) possibility to get good signal is low). Btw, real on site testing would be ur best option.

if i purchase the LINKSYS WRT54GL from you, hows it like ? like the 1 in the photo ? modified and come with heat sink ? or a like those we can buy from shop, we need to handle the heat problem our self ? What is the safe output power range ?

This post has been edited by narf03: Sep 15 2008, 09:22 PM

It's a brand new Linksys WRT54GL comes with 3 years warranty. I also flash the router with DD-WRT V24 SP1 for you. The one in the photo is sample of our modded hotspot setup. The safe output power range for normal GL is between 70 to 100. If you have proper cooling devices you can go more than this :-). It would be great combination if you paired this router with the HIGH GAIN Antennas.

i wanna setup a wireless network. range are up to 1.5km to 2km. what do i need. can i just use 1 18dbi antenna at a point and the person at range 1.5k can use the wireless? LoS is so bad btw. suggest me a good deal and price. apriciate a low good price. tq

The price are fix unless you buy 10 of them or 20 we can bargain

halo boss...my problem is almost like azmihamzah.my distance is a bit narrow if compare with azmihamzah case (almost 400M wide n straight line 300-350M) my roof is higher than all other roofs in the taman . i would like to make whole taman got coverage....did u think my case suitable for ur 8dbi antenna.....i m using bufallo WHR-HP-G54 router

i believe u r referring to narf03.. azmihamzah is a sifu, theres no way 300-500m can be a problem to him

oh soli mistaken my case is similar to narf03 can i use 8dbi antenna?

Use a directional should be okay :-)