That's why, I wonder safe or not. Later benchies all godlike but daily use cannot tahan then die liao. So that means we have to monitor the temp only right, as long as its still low temp we can pump vcore right ?

Editted : Just saw your offer hahaha. Kenot woo, I travelled far just to take the proc from sempronic haha. Or u were offering Bro db's proc ?

U ahh, at first I was like "no wonder I only see 32m but not more than 1 hour orthos on most high oc results" and was like "god after this 3.1ghz also have to use 1.3 1.4v" Then click the spoiler

Seriously, have you touched 1.6v with air cooling before ?

This post has been edited by mizivincible: Feb 20 2008, 05:34 PM

I see, I think I need 1.6v to be stable at 3.6 above. Of course with air cooling only. But that hell of voltage plus that PWM screaming like tikus kena trap and screams, kinda scared already. Will try again later I guess, owh yeah, I havent post any SS yet I guess, will do when I get my hand on my rig later.

Yeah I did that for the past few days, running naked, naked system I mean, without the casing, and put it in aircond room with the ambient of 18'c. It helps a lot as the temp didnt really rise at all even at 1.5v, it still at 29'c idle and 33'c load.

Will try 1.6v if can But no more naked system as already put in the casing, lazy wanna take out and do the cable management and whole stuffs again.

Hooray, 3.0ghz

There the sound of PWM I was talking about. Like rat kena trap and ciitt ciitt sound.

---

Added on February 20, 2008, 7:54 pmHaha, lame. Perhaps the one doing 3.1ghz not him but the one who still waiting for hi end psu

This post has been edited by mizivincible: Feb 20 2008, 07:54 PM

It wont go kaput that easy lorr. Afterall you already got what it needs - Hi end psu, hi end cooler, hi 4th floor apartment , semua hi. Try 3.1ghz with slightly higher vcore, I think can one.

---

Added on February 20, 2008, 8:01 pmJust OC ram lorr. And later run spi 1m Then for record in database 32m

This post has been edited by mizivincible: Feb 20 2008, 08:01 PM

Less competition means ?

Who said your brisby cannot go more than 3.0ghz, u never tried maa, later zeus came and enough watage lorr for 3.0ghz above

If ram is your bottleneck, what you have to do is go to 3rd room, there's a cm casing with 4x1gb OCZ there, take it out and put at yours. Kawtim

Weyh, lapping easy onli nia. I have leftover sandpaper from 100 - 2000 grit.

---

Added on February 20, 2008, 8:20 pm10th anni have to wait for db,-pWs- and ongbs then

This post has been edited by mizivincible: Feb 20 2008, 08:20 PM

At last can pasang your tuniq

Congrats on new mobo, both of us using new mobo this week

Bro Lacus, U were asking about Aneon Ram right ? Why dont you try Team Elite 800 that capable of doing beyond 1000mhz It uses promos chip which really oc-able.

---

Added on February 21, 2008, 1:42 pmWait till you see my GeminII with Two 120x120x38mm Sanyo Denki H series. That cooler alone is frigging heavy, not adding those two big fan. The weight is more than 1kg plus.Later if got chance I'll measure the weight But still my TA690G runs strong

---

Added on February 21, 2008, 1:50 pmWhy chipset cooler when u still using stock hsf ? Should change the hsf first to better one. If you want super air cooling, Thermalright IFX that cost you rm299 only the cooler alone

---

Added on February 21, 2008, 2:01 pmTried out my friend Asus M2A-VM, surprisingly, no ram timing setting. They original set at 5-5-5-15-21. I would say TA690G is fully equipped with oc setting

This post has been edited by mizivincible: Feb 21 2008, 02:01 PM

Of course 10th anny is way better than those value ram that you mentioned. 1200mhz without any sweat, Im sure you cant resist the temptation. But is there still any seller that carries 10th anny ? Kinda rare nowadays.

Haha, and I spotted 'someone' asking for black edition in garage sales, dont know who's that leh ?

Is it true that in XP super pi runs 1 sec faster than vista ? How if I turn off all the startup load ? Still the same ? Last time forgot to try pulak. If 1 sec then makes alot of difference wooo...

IFX-14 ? Monster cooler there ! Thinking of getting that one but not in the moment, somehow its kinda overprice.

Anyway damn sad weyh lotsa 4000+ Brisbane G1 surpass me, used to be second behind beast now at 6th place dah

Ok, time to update as promised !


AMD Athlon X2 3800+ Windsor F3 | mizivincible | Biostar TA690G | OCZ SLi Ready 4gb | 892 mhz | 5-5-5-15-20-2T | Cooler Master GeminII

Thinking of hitting 3.6ghz,perhaps later coz now in the end of sem lotsa assgments to be done scare anything happen to my hardware



This post has been edited by mizivincible: Feb 25 2008, 01:38 PM

Haha, super F3 only for super user, me still learning

Anyway, I posted my result edi. Any room for improvement ?

This is my SPI 1m. I was using Vista and as claimed by bro db super PI calculation in vista is 1s slower than XP. I wonder how does it do in XP

Anyway today just switch back to XP, Vista after sometimes very mahfan and sienz

Hehe, I just find that Vista is somehow more "secure", that's why mahfan, no freedom

Anyway, BE is with unlocked multiplier if Im not mistaken. I guess going for any of them also not a problem since both of them can go up to 3.0ghz easily.

That's really convincing. As I can see lots from us who want to migrate to Intel. Later all gone and this thread wont survive. Anyway bro, I think my latest result you can update it in database aite. I dont think I want to go higher, perhaps later but not now. Anyway thanks alot to you for keeping up this thread alive, good job

p/s : Now going to update score at superPI top ten pulak