Anyway guys, how much core voltage drop you guys experience when stressing in orthos ? Yesterday finding sweet spot for daily use and during idle is 1.31v and load was 1.28v, so which reading should I take ?

And another thing, before I oc my gc, I just use 1.30v to stress orthos and it passed for few hours, but after I oc my gc, orthos failed after 56 minutes. So does it have anything related to each other ?

Mine stable few hours stress 3.2ghz @ 1.28v. But during idle 1.31v.

Wow, seems like this B3 is hot, at least ppl are talking about it. Hopefully like what sempronic said, B2 = F2 , B3 = F3 in terms of oc capability.

Someone ? U mean me and alive88 ? Hehe. Where are you staying bro ?

I sell you my GeminII la then, provided if you have good fans it works like charm. After that I get IFX

---

Added on February 27, 2008, 12:05 pmCan customers do so ? As the chip is only un-oc-able, they still run good at stock right ? We'll wait for tri-core B3, and wonder if it can hit 4ghz as well

This post has been edited by mizivincible: Feb 27 2008, 12:05 PM

If you stop at IOI Mall, u still have around 2-3km like that to reach there. If IOI Mall is on your right side, just proceed until u see Bandar Puteri, Alphamatic can be seen from the highway.

I only see divider problem here. But mine, my ram cannot use cl 4 AT ALL ! If use then when reaching 2.6ghz wont boot anymore. Now using 5-5-5-15, stable at 2.1v @ 1066mhz. Btw Im using OCZ SLi edition 4gb kit.

---

Added on February 27, 2008, 5:19 pmRecommended ! Best bang for bucks ! Few hardcore oc here oso with TA690G.

This post has been edited by mizivincible: Feb 27 2008, 05:19 PM

Guys, sorry but what's the stock vcore for 3800+ F3 ? Issit 1.26v or only 1.20v ?

Really ? Typo bro ? 1.18v is too low. Or u meant 1.84v ?

Sorry sorry, my bad ! How could it be 1.8v ! Duhh

But I think it should be around 1.2v right ? 1.18v is because of the voltage drop of the mobo.

Now at college running 3.2ghz at 1.32v. Later after grad staying at own place have to run stock vcore for saving purpose

So, stock vcore for 3800 F3 ?

This post has been edited by mizivincible: Mar 2 2008, 02:52 PM

U using aftermarket cooler. Try up to 1.4v first. Slowly increase the vcore

Hello abang abang sekalian,

Can recommend a good SLi mobo which has oc features par or almost complete tweaking mode like Biostar TA690g ? Thinking to try SLi but not in the moment la. Budget should be not more than RM400 or less.

How about trade with my brand new (used for few weeks after RMA) TA690G hahaha. (Alamak forgot yours also "brand new")

Hows the oc capabilities abang alive ?

Owh ic, but Alive's one should be 2x 16 pcie right ?

Tempting, you still looking for TA690G tak ? Trade suka sama suka Or you wanna let go your mobo ? Eyh, PM me la senang. Either trade or letting go. I will consider it =D

Alamak, abang abang, still you guys havent rekemen good OC SLi board. The card I wanna SLi isnt G80 Ultra or GTX la haha, just 320 G80. Sayang wanna sell the card so might as well SLi.

---

Added on March 11, 2008, 6:16 pmTo bro -pWs-,

My ss dont know where, perhaps I ter-delete it. At 3.3ghz, I need 1.38v, when orthos full load 1.35v With timing 5-5-5-15-21 2T. Full stress 12hours. Thot gonna use this for 24/7 but now run 3.2ghz at 1.31v, 1.28v load.Anything that I missed out ?

This post has been edited by mizivincible: Mar 11 2008, 06:16 PM

Bro, mine last time with 4-4-4-12-16 2T I manage to hit 3.0ghz with 1.44v. Heres some screenie, hope it helps -

Haih, add another step of vcore for safety purpose and run orthos for you, there u go. Picture tells a thousands words.

To alive88,

just came across the price of your board. Its RM590 hohoho. Cannot support lorr.

p/s : didnt mean the mobo cannot support my proc, its my wallet cannot support the mobo haha.

Dang. Damn expensive lorr. I just remembered last time u said if Alphamatic give you TA690G for replacement you will take it, thot the price range no much differ.

But RM690 is