gonna try real hard to reach 1200 tonite then... one thing i noticed was it run quite hot even on low voltage. my dcl run @ near 1000 w 2.2v not as hot as d 10 anni...
AMDŽ Socket-AM2/AM2+ Overclocking thread (V6), Will AMD alive??
|
|
 Mar 3 2008, 12:57 PM
Return to original view | Post
#101
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
wah... now i finally realized why u guys so crazy (esp xixo) bout d 10th anni, it's simply superb...
gonna try real hard to reach 1200 tonite then... one thing i noticed was it run quite hot even on low voltage. my dcl run @ near 1000 w 2.2v not as hot as d 10 anni... |
Quote|
|
|
|
|
Mar 3 2008, 01:06 PM
Return to original view | Post
#102
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Mar 3 2008, 12:58 PM) me? yalor... i get d crucial virus from u... non stop promotin, now i got ram but no food...   @ bro dblooi: wats d voltage u fed d golden stick to do a 1320?  This post has been edited by ah_khoo: Mar 3 2008, 01:07 PM |
|
|
Mar 3 2008, 01:21 PM
Return to original view | Post
#103
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(digswell @ Mar 3 2008, 01:13 PM) another one crucial 10anny fever guy. bro, once u tried, u'll fall in love w/ it, trust me...  ..mcam talak ubat ..   1200 is my final target i think, just nice for my lauyah f3 @ 3.0GHz w/ 800 multiplier.  |
|
|
Mar 3 2008, 01:53 PM
Return to original view | Post
#104
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(digswell @ Mar 3 2008, 01:47 PM) wan m to buy 667 ram..no way..wasting. u still can use it on d next mobo wat, not necessarily u need a 1066 ram to run a tri-core phenom. some more almost all 10 anni are capable of that (1066)... better i staby for 1066 ram for my next triple core phenom proc  QUOTE(dblooi @ Mar 3 2008, 01:47 PM) 2.6v wow.. that's abit extreme... mobo voltmoded for more juice? as far as i remember, ta690g offers 2.5v max, rite?   |
|
|
Mar 3 2008, 02:08 PM
Return to original view | Post
#105
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(casperito @ Mar 3 2008, 01:53 PM) hehehe.. triple core fever is coming... yup, fasten ya seatbelt gentlemen... dun think phenoms can do so high in htt like intel (just that they support ddr2 1066), so i reckon d current generation of ddr2 still usable on phenoms. QUOTE(dblooi @ Mar 3 2008, 01:58 PM) That's TA770 A2+ , mobo detail is shown in the SS icic... pardon me for my ignorance...  TA690G max vdimm is 2.6v wait a min, you're using TA690G also right ?  i never touch any vdimm above 2.45v, that was d highest i whacked on my dcl just for a mere 1000...    This post has been edited by ah_khoo: Mar 3 2008, 02:11 PM |
|
|
Mar 3 2008, 02:21 PM
Return to original view | Post
#106
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(alive88 @ Mar 3 2008, 02:16 PM) wa..felt like my ram sh*t a lot...ddr1320?dreaming to get that..haha bro, 1210 w 2.1v aint that bad leh... it's gud enuf for me ledi... do u guys actively cool d ram? it's kinda hot for me but i have yet to get a ram cooler for my pair. abit worried that d temp will kill d ram in long run even w/ 2.0~2.1v only... |
|
|
|
|
|
Mar 3 2008, 02:40 PM
Return to original view | Post
#107
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 3 2008, 02:27 PM) For 10 Anniversary, it is better to get active cooling.  It is very hot compared to others ram. -pWs- QUOTE(dblooi @ Mar 3 2008, 02:28 PM) my ram can only do 1200 at 2.1v gulp... ram killer 1) high voltage 2) overheat 3) tight timings+ high frequency always active cool the ram so that it can stay healthy  gotta spend again... can only do that after i get my pay... » Click to show Spoiler - click again to hide... « QUOTE(Lacus @ Mar 3 2008, 02:36 PM) hmm, how do i noe if my rams get hot? If the side panel of my casing already got a huge fan if ya ram is naked then prolly there's nothing to worry bout if no insane voltage (2.2v and above) are pumped.  ...Still need to buy the ram cooler? This post has been edited by ah_khoo: Mar 3 2008, 02:43 PM |
|
|
Mar 3 2008, 02:54 PM
Return to original view | Post
#108
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Mar 3 2008, 02:45 PM) gulp.. me again!! buat lawak pong x bleh kah... i'm not the promoter   chill bro, was just a joke mah...  QUOTE(Lacus @ Mar 3 2008, 02:45 PM) the thing is..I dunno how much vdimm am i pumping to the rams it's time to change a new mobo... ...Getting the rams from temptation1314 xD...*I see xixo_12 almost on certain thread i'm in  * |
|
|
Mar 4 2008, 12:59 PM
Return to original view | Post
#109
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 4 2008, 12:08 PM) Just got my another pair Crucial 10th. 10 anni eater detected... Hopefully dun disappoint me -pWs- must be d hype of windows vista... show d result... fast... |
|
|
Mar 4 2008, 01:28 PM
Return to original view | Post
#110
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 4 2008, 01:17 PM) Here you go. so fast whacked it > 1000 ledi kah bro? my 1st attempt just 1000 only leh... mebe i too -pWs-  d ram... vdimm @ ??? QUOTE(digswell @ Mar 4 2008, 01:20 PM) Have to leave this thread a while.... resistant is futile... join us...  » Click to show Spoiler - click again to hide... « |
|
|
Mar 4 2008, 01:43 PM
Return to original view | Post
#111
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 4 2008, 01:36 PM) Vdimm = 2.1v pardon me for my bad english... I know this ram can go until how much d ma. Just whack lor Resistance is futile -pWs- at 2.1v... perhaps 1200 or more, give us more...  |
|
|
Mar 4 2008, 02:41 PM
Return to original view | Post
#112
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 4 2008, 01:48 PM) For others board maybe can. have faith in dfi bro, d new mobos are comin... But for my board, it is hard. Not sure why. Always need higher Vcore n Vdimm compared to others board. -pWs- could it be chipset issue instead of manufacturer problem. waitin for this comin thursday, there'll be new addition to d family... This post has been edited by ah_khoo: Mar 4 2008, 02:55 PM |
|
|
Mar 4 2008, 02:53 PM
Return to original view | Post
#113
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cracksys @ Mar 4 2008, 02:48 PM) omg really nice clock there bro... cannot believe but here i amCODE AM2 X2 4000+ Brisbane | cracksys | Biostar TA690G | Team Value 667 | 620Mhz | 5-5-5-12 | ThermalRight XP-90c so .. is my motherboard possessed by demon or what ?? sumtime cannot past 3040Mhz, sumtime can ... haiz my lauyah f3 just a tad better than ya super g1...  This post has been edited by ah_khoo: Mar 4 2008, 02:53 PM |
|
|
|
|
|
Mar 4 2008, 03:51 PM
Return to original view | Post
#114
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 4 2008, 03:17 PM) I always have faint in DFI hmm... still amd product but not chip... guess wat... Btw, what is the new addition?? -pWs- hint in cantonese: » Click to show Spoiler - click again to hide... « |
|
|
Mar 4 2008, 04:01 PM
Return to original view | Post
#115
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 4 2008, 03:57 PM) LOL bingo... 2900XT right?? -pWs-    but no gift for that... didn't manage to push my ram further lastnite... |
|
|
Mar 4 2008, 04:53 PM
Return to original view | Post
#116
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(digswell @ Mar 4 2008, 04:43 PM) Still problem with ur 2900xt cannot oc.....?? next time dont buy tat ah sus bro, i guess it's not becoz of asus, one thing prevent 2900xt to be overclocked is the power connector thingy. u need pure 8-pins + 6-pins connector in order for ati overdrive to work, else, u can just run it @ stock. btw, d one i'm gettin oso asus... i like their 3 years warranty only... |
|
|
Mar 5 2008, 10:27 AM
Return to original view | Post
#117
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cracksys @ Mar 5 2008, 09:24 AM) yep .. what's ur point ?? d thing is, u gotta make sure d ram is stable enuf @ d speed u gonna run it. edited : oppss ... didnt see ur post in here ================================= as i havent found solution to my newfound problem ... i'm gonna keep asking does ... high proc clock effect ram stability ?? (consider ram oledi as loose as it can be) say ya intend to run cpu clock speed at 3.0GH (10*300HTT), ram @ 1000MHz (w/ 667 divider). in order to test d stability of d ram, try to use 9*333HTT or 8*31xHTT to minimize d chance of instability caused by d chip while tryin to find out stable intended speed for ya ram. it's just like solvin an equation with 2 unknown, u can't solve it as long as there are 2 there, u must somehow eliminate one of 'em 1st. pardon me if my explanation sucks... |
|
|
Mar 5 2008, 11:09 AM
Return to original view | Post
#118
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cracksys @ Mar 5 2008, 10:56 AM) bro ah_khoo have u play w/ d subtimings? could be that or u stressin d mem controller (which is integrated on d chip) too much. that's what i can think of atm... i understand some and get lost in another like in my test ... CPU - 2.920Ghz (292*10) RAM - 728Mhz (div 533mhz) memtest okeCPU - 3.120Ghz (312*10) RAM - 592Mhz (div 400Mhz) memtes failed so now i have to add 1 other unknown .. can help ?==================================== @bro AMDAthlon why dont you try lower multiplier ?? for me, 10x yield best result with stock vcore (2920mhz) need all d sifus here to troubleshoot for u ledi... |
|
|
Mar 5 2008, 11:22 AM
Return to original view | Post
#119
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Mar 5 2008, 11:02 AM) for the easy in oc.. try to know well how ur hardware perform.. not push altogether QUOTE(xixo_12 @ Mar 5 2008, 11:16 AM) for easy references..include the memset tab.. and also the cpuz .. eh... crucial promoter dah balik... @ bro digswell but ta690g memtest is kinda old (no ram speed & timin IIRC), wonder why they didx integrate d newer version instead. This post has been edited by ah_khoo: Mar 5 2008, 11:36 AM |
|
|
Mar 5 2008, 12:44 PM
Return to original view | Post
#120
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 12:27 PM) Hi Guys, samething here when i try to prime w/ 3.3GHz. no matter wat kinda setting & voltage it'll just fail almost instantly. for my case i guess that's d limit ledi. not so sure bout yas bro as ya board has some issues w/ d divider thingy. Need advise here. I only can go 3100MHz stable w my current hardware. When I go 3200MHz, Windows can boot flawlessly, but Orthos failed in 1 mins. FYI. Add Vcore n Vdimm wont help. Tref and MAL also loosen. Any idea?? @fuzore Yes. As sempronic said, from a forummer name kiong. -pWs- @ bro cracksys mebe weak mem controller. my chip can do 3.0GHz w/ 1.26v with ram runnin 533 divider, but at 2.8xGHZ w/ ram runnin 800 divider, it needs 1.26v to be stable. that's wat i noticed lately, but i mite be wrong as i dun have much time to play w/ my rig lately. |
|
Topic ClosedOptions
|
| Change to: |  0.4590sec
 0.62
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 07:46 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.