ask bout d availability of lp dk790fx they said not yet in production but i can see ppl at d west ledi start purchasin...
AMD® Socket-AM2/AM2+ Overclocking thread (V6), Will AMD alive??
|
|
 Mar 5 2008, 04:45 PM
Return to original view | Post
#121
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
i always wanna try out dfi am2 board but no chance. anyone of u tried d infinity cfx3200 b4? can't find here in singapore, even d distro dun have...
ask bout d availability of lp dk790fx they said not yet in production but i can see ppl at d west ledi start purchasin... |
Quote|
|
|
|
|
Mar 5 2008, 05:49 PM
Return to original view | Post
#122
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 05:02 PM) I already ask jy14 for that board. which board ur referin to bro? 790fx or cfx3200? You also interested??  -pWs-   i'm in for both, but thinkin of d upcomin phenoms, 790fx would be a wiser choice. saw amd goin to release 9100 b2 phenoms (1.8GHz only), mebe we can get one, torture it to death & prayin d b2 phenoms to phased out then amd replace it w/ a b3 phenom...  am always a dfi fans...  This post has been edited by ah_khoo: Mar 5 2008, 05:50 PM |
|
|
Mar 5 2008, 05:56 PM
Return to original view | Post
#123
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 05:51 PM) I meant DFI DK 790FX M2RS. no debug card & no heatpipe (which is not needed since 7xx chipset aren't really hot), hopefully it'll only cost around RM550 or so. i'm anticipatedly waitin for d board to be released...  Yea...the 9100 is nice if can overclock to around 2.4-2.5GHz.  -pWs-  This post has been edited by ah_khoo: Mar 5 2008, 05:57 PM |
|
|
Mar 5 2008, 06:48 PM
Return to original view | Post
#124
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 05:58 PM) It is already released I think. thx bro, pls keep me posted... Somemore UT series using more powerful onboard soundcard which I do not need it. Waiting for jy14's answer. Will tell you what the price if i know it. -pWs-  QUOTE(Lacus @ Mar 5 2008, 06:00 PM) I also interested in this board liao...maybe try to get more budget....-pws-'s poison tooo strong....can't resist... haha... when it comes to dfi, it's really hard to resist.... QUOTE(-pWs- @ Mar 5 2008, 06:03 PM)   But I not confirm to buy yet. Need to know the price. And i cannot find any review on it. Mayb the board not good  But if UT series (his bro) is good, DK should be good rite? -pWs- QUOTE(digswell @ Mar 5 2008, 06:15 PM) i interested with UT series...but b4 i wan to buy..hv to see coming phenom proc 1st have some faith in amd bro but dun expect her to beat intel w d b3, shanghai of 45nm perhaps... So will no wasting money if the phenom still got problem  |
|
|
Mar 5 2008, 08:21 PM
Return to original view | Post
#125
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 07:23 PM) Wow...nice price for DK series. hmm... normal pwm is that bad meh bro? The price is as expected. -pWs- QUOTE(dblooi @ Mar 5 2008, 07:26 PM) UT series uses transpipe and digital PWM bro, this mean gud or bad? pardon me for my noobness... Remember the review? it describes the core voltage reading like dead man's heartbeat diagram no matter idle or full load, the vcore remain the exactly the same QUOTE(AMDAthlon @ Mar 5 2008, 07:58 PM) Guys i still have prob even increasing the VDIMM to 2.40,Ram Divider setted to 533,multiplier set to 10x,Command Rate set to 2T.Still it stuck at Verifying DMI Pool Data....What i need to do more?I done do memtest and no problems/error was found.Whats the problems here? htt speed too high? by d way guys, here's d update of my ram. with 2.0v this d so far d max... not so impressive...  
This post has been edited by ah_khoo: Mar 5 2008, 09:17 PM |
|
|
Mar 5 2008, 08:42 PM
Return to original view | Post
#126
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Mar 5 2008, 08:40 PM) @-pWs- i believe bro -pWs- will be d 1st lab mice... review time, if u own its first |
|
|
|
|
|
Mar 5 2008, 08:50 PM
Return to original view | Post
#127
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 08:45 PM) You are wrong. must be someone else... bro digswell? Really depends  Wait for somebody's response 1st. -pWs- me after d yi kaw leng2 pokai ledi...  |
|
|
Mar 5 2008, 08:59 PM
Return to original view | Post
#128
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 5 2008, 08:54 PM) I suggest bro dblooi to do the review. hmm... me??? Nope. -pWs- not likely, if i grab one prolly i gotta sacrifice d card...  by d way, noob question, can clockgen be used on ta690g? i installaed once but didn't manage to get it work...  
This post has been edited by ah_khoo: Mar 5 2008, 09:03 PM |
|
|
Mar 5 2008, 09:05 PM
Return to original view | Post
#129
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dblooi @ Mar 5 2008, 09:03 PM) click PLL setup thx for d guide bro, tryin now... kiinda lazy to reboot d pc evelitime... choose ISC951462 , click apply now you can drag the clockspeed, but it doesn't display properly choose ISC950405 now, click apply done |
|
|
Mar 5 2008, 09:23 PM
Return to original view | Post
#130
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
guys, just a quick check... how high ya 10 anni can go w 2.0v? i'm stuck at 1120 only...
 |
|
|
Mar 5 2008, 09:40 PM
Return to original view | Post
#131
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cracksys @ Mar 5 2008, 09:37 PM) err .. but i read software base OC is not recommended it's useful to save up sometimes wasted in rebootin bro. usually software oc is to fine tune d oc'ed settin... ofcoz bios oc still d best for 24/7...  This post has been edited by ah_khoo: Mar 5 2008, 09:42 PM |
|
|
Mar 6 2008, 12:46 PM
Return to original view | Post
#132
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cracksys @ Mar 5 2008, 09:56 PM) as usual .. another lesson learned ... i looked back and *sighed* at all of those time wasted when i reboot QUOTE(cracksys @ Mar 5 2008, 10:03 PM) 275*3x = 825Mhz <-- HT Link ... i dunno how many time i wasted for that ledi... ya .. time wasted but exp priceless QUOTE(alive88 @ Mar 6 2008, 12:38 AM) there r 3 procs..one is dual core,one tri-core,and one quad..x2 cost less,performance as we know..x3 cost a bit expensive only,but performance better.much better:hehe:..but x4 is another option... 9100 quaddies... indeed the best,but its expensive..much expensive..so,what will u choose?????? the middle one is the best..its my choice lar..coz me budget person only.. QUOTE(AMDAthlon @ Mar 6 2008, 01:12 AM) yeah it stuck at verifying dmi pool data..sien edy la memset + clockgen will save u lotsa time...Just back from boot.STIll after decreasing the VDIMM to 2.20 no results.Haiz i hate restarting..= = Here CPUZ screenshots[attachmentid=411431] << Please note the OC is done in Windows! QUOTE(-pWs- @ Mar 6 2008, 02:41 AM) Maybe only. hoot 1st then only think... Still in consideration -pWs- QUOTE(ocz @ Mar 6 2008, 02:42 AM) Dfi 790FX DK and UT,which one is good? isn't it obvious bro? RM590 and RM910. QUOTE(dblooi @ Mar 6 2008, 02:47 AM) IMHO, better get a budget mobo 1st. dfi x48 will definately cost a bomb... not forgettin if d price of their quaddies chip bro. u aint gonna pair a entry / mid range chip w d super high end board rite? If deneb fails, jom we join darkside DFI LP UT X48 Please check previous few pages, bro OCZ we discussed it a while ago QUOTE(Lacus @ Mar 6 2008, 02:54 AM) Y everyone wanna move to dark side I'll always support amd..No matter what happens bro, with all d positive reviews (bout ut), i think it worths.... Meh, -pws- and dblooi keeps talking bout DFI stuff...This thread sure has strong "poisons"» Click to show Spoiler - click again to hide... « This post has been edited by ah_khoo: Mar 6 2008, 12:46 PM |
|
|
Mar 6 2008, 10:05 PM
Return to original view | Post
#133
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Mar 6 2008, 09:44 PM) Okie...Noted. bro, there's no such need as highest clock is d aim regardless d juice needed. somemore those overclcked settin is not meant for 24/7. later newbies put that kinda voltage for 24/7 & spoilt their chip then they'll blame d db... I will have those Vcore n Vdimm added for new entries. For old entries, if you want them to be added, kindly please PM me the details. This update will only be done after my test. Hope you guys bear w it. Many thanks. -pWs- QUOTE(xixo_12 @ Mar 6 2008, 09:47 PM) no need i think.. just make u very tired onli.. after that maybe they keeps asking later yup, i second that... oc is about to find urself..although have a lot of reference it doesnt help, based on the previous experience btw, show off abit... » Click to show Spoiler - click again to hide... « This post has been edited by ah_khoo: Mar 6 2008, 10:08 PM |
|
|
|
|
|
Mar 7 2008, 12:37 AM
Return to original view | Post
#134
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(alive88 @ Mar 7 2008, 12:23 AM) hmm.. to us is nothing but to d one who maintain d db is... theres a point..but i think this is for reference only. coz most of us(or maybe only me ) will keep wondering what vcore and what vdimm did they use to achieve that speed..but for sure its not for their 24/7..coz people keep asking,what is the highest vdimm shud i put?or the vcore to reach that speed?off topic..weh xixo.pinjam GC baru..nk test xixo bought new gc ke? wah... amd fever is high in here, not only cpu, gfx decease oso started to spread... |
|
|
Mar 7 2008, 09:04 AM
Return to original view | Post
#135
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
guys, need some help in gettin d mal value saved correctly. i'm almost certain that mal is the culprit why i can push d ram higher coz when i'm in windows & use memset to alter the change (MAL from 8 to 10), i can run sp 32m longer, even it failed @ 6-7th loop
. but w MAL = 8, it failed almost instantly. everytime i set mal = 10 in bios but after reboot & save still it goes back to 8....  wat cud be d subtimin that effectin this? any idea bros? This post has been edited by ah_khoo: Mar 7 2008, 09:08 AM |
|
|
Mar 7 2008, 09:14 AM
Return to original view | Post
#136
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(alive88 @ Mar 7 2008, 09:10 AM) MAL=8 is tight bro..yup,change it to 10..ur trfc?may change to 127.5ns or 195..too loose:hmm: ya... d thing is d bios can't take mal = 10 when trfc = 75ns.... post ur memset 3.4 gotta agree w u that trfc could be d reason behind this... This post has been edited by ah_khoo: Mar 7 2008, 09:20 AM |
|
|
Mar 7 2008, 09:59 AM
Return to original view | Post
#137
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(alive88 @ Mar 7 2008, 09:31 AM) hmm..need to ask xixo or dblooi..try to change the trfc first.. and there's a value (forgot wat it's called but i had oc my ballistix to ddr1260,with mal=6ns and trfc=75ns..vdimm at 2.17,but single channel.. ) with options skip dqs sumthing / perform dqs sumthing, i notice that i can only set it to perform dqs as whenever i set it to skip dqs, one of d value in htt settin (again forgot wat it's called, old man i am  ) will turns to auto from 16-bit. by, this, i gotta set d auto to 16-bit then only d oc settin can boot normally.  QUOTE(digswell @ Mar 7 2008, 09:38 AM) hey guy is there a good idea or not if i change my Biostar TA770a2+ to Gigabyte GA-MA78GM-S2H ?? 780 consume more power than 690g, it cud be hotter but definitely worth as d integrated gpu can boost d performance of ya pci-e card through hybrid cf (providin it's ati ofcoz)... Any comment ?? best bet, get d atx 780 board, gigabyte GA-MA78GM-S2H max vcore is gud (1.9v iinm) but vdimm sucks (2.1/2.2v)... QUOTE(alive88 @ Mar 7 2008, 09:44 AM) wa..digswell got money already..sell your motor ka dun poison him leh... QUOTE(xixo_12 @ Mar 7 2008, 09:49 AM) hey!! where is the story come from 1st 10th anni ram then followed by gc, u poison ivy... i dun think to buy any new card at the moment waa spread the wrong story again » Click to show Spoiler - click again to hide... « This post has been edited by ah_khoo: Mar 7 2008, 10:02 AM |
|
|
Mar 7 2008, 11:19 AM
Return to original view | Post
#138
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(digswell @ Mar 7 2008, 10:43 AM) still on thinking bout it..but tat Gigabyte GA-MA78GM-S2H is s#ck .vdimm only +0.3...TA780G outdate sound card ... be d 1st amd clocker to own a dfi dk 790fx... Aiyooo...better wait for DFI see will coming out mobo with 780chipset or not you can be d TS of dfi dk 790fx club & chairman as well... |
|
|
Mar 7 2008, 11:30 AM
Return to original view | Post
#139
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(AMDAthlon @ Mar 7 2008, 11:24 AM) Get the Biostar 780MG series la i wud say go for J&W A78G instead if their not stingy in givin d voltage.  more 780g boards HERE... |
|
|
Mar 7 2008, 11:41 AM
Return to original view | Post
#140
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(MangKoK^ayon @ Mar 7 2008, 11:32 AM) 1 pcie slot only?hot to hybrid cf? hybrid cf w/ d onboard gpu bro... something like this...  more HERE... QUOTE(fuzore @ Mar 7 2008, 11:39 AM) @pWs actively cool it 1st bro, they are hot... bro i just got my 10th anni today planning to abuse it tonight so what is the max vdimm it can stand so far....  This post has been edited by ah_khoo: Mar 7 2008, 11:42 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0361sec
 0.35
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 02:15 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.