my OC results... (sorry no screenies)

Intel Core 2 Duo E8200
Gigabyte GA-EP35-DS3
Corsair XMS2 Twin2x 2048-6400
Winfast GeForce 8600GT DDR3

Proc OC = Vcore: 1.136v ; Clock: 3.0Ghz ; FSB: 1500Mhz
RAM OC = Vdimm: 1.8v ; Frequency: 450MHz ; Timing: 5-6-6-21 2T
GPU OC = Core: 600Mhz ; Memory: 750Mhz ; Shader: 1296Mhz

bro..show some ss..wanna see the ram capabilities..if it barely survive on intel platform,i wonder how will it perform on amd base rig

erm... after OCing it... i really loose faith on Corsair XMS rams...
it clocked at arrond 420 MHz with a timing of 5-6-6-19
further than that will result in unstable platform and crash your windows....

THIS IS SO SHIT...
getting rid of this RAM soon...

that is shit..real shit..u know what chipset it used?

Ermm...what ram you bought??
Impossible so low wor.

-pWs-

Corsair Twin2x CM2048-6400
f***ed up ram... even Kingston's ValueRAM DDR667 can OC my proc to 3.2Ghz

---

Added on February 22, 2008, 4:27 pmthis one got stable at 2.8Ghz processor clock....
SHIT !!!!

This post has been edited by general_odin: Feb 22 2008, 04:27 PM

Try pump some v,see how

tried... can go extra 12 +/- MHz more only T_T
approx 432Mhz like that lo....
damm shit

not planning to do Voltage OC by long term....

---

Added on February 23, 2008, 8:36 amtried... can go extra 12 +/- MHz more only T_T
approx 432Mhz like that lo....
damm shit

not planning to do Voltage OC by long term....

This post has been edited by general_odin: Feb 23 2008, 08:36 AM

yeah..u just like me..loose faith in xms corsair..i think Team Elite/Team xtream more useful 4 OCing..
i have try Team Elite b4 n get really nice OC result..but after upgrade,c my validation CPU-z..

http://valid.x86-secret.com/show_oc.php?id=318443

Thats all i can get from my xms2..really bad..

try to loosen the timing..its tight dude..

whoasai not bad

hmm... wad type of RAM you use?
nice timings there....
but still my result are far worst than yours

yes..i know..my ram 2 tight..coz if i loosen the timing,my system will come w/ BSOD(blue screen)..thats y i said this ram very disappointed me..

But.........then i have try jack up the Vdimm from 2.04v to 2.16v@2.2bios..i get the new result..very nice result..
so i take back my -ve word about this ram..This ram ok la..u look my new OC..






http://img228.imageshack.us/img228/9661/newsystempr2.jpg

i got 4-4-4-12 2T/1T @ 358.9MHz freq
how it is alive88?i know u know about this OC well...

---

Added on February 27, 2008, 4:54 ammy ram same with u kot.. Twinx 2x1gb xms2 ddr800 rev5.0>...if u wan to OC ur cpu,Vcore may at stock.but memory smetime cannot follow ur OC..thats y,we must low the divider n up the vdimm..

my cpu OCed from 2.0GHz to 2.51GHz..RAM freq 358.9MHz..real freqx2=DDR718..i know i have run below DDR800.but thats the better to stick with best speed of cpu n memory..i can OCing my cpu 2.60GHz or higher but i cannot handle the cpu temp..very hot..if i do so,my ram will get the better then DDR800..just wait to change the air cooler to water cooler..(mayb 2 years)... mayb i changed my system the next 2 years..hoho..


This post has been edited by lotr_tm: Feb 27 2008, 06:04 AM

i can OCed..


a) 358.9MHz @ 4-4-4-12 n
b) 418MHz @ 5-5-5-15...


which one the better choice?

i can OCed..


a) 358.9MHz @ 4-4-4-12 n
b) 418MHz @ 5-5-5-15...


which one the better choice?

Time for u guyz go for other alternatives, changing other brands.

for me i would go for

b) 418MHz @ 5-5-5-15...

coz i wanna get some juice from my processor
wakakkaa

thnx..so i stick wif 418MHz..i hope my cpu will reach 3.0Ghz some day..

Try increase vcore and try 4ghz

so far i'm still the highest