RAM: CORSAIR Twin2x1024A-6400 ver 4.1
Frequency: 400
Timing: 4-4-4-12-2T
Vdimm: 2.2v
-pWs-
This post has been edited by -pWs-: Feb 4 2008, 03:17 PM
Corsair XMS2 Overclocking Database, Share your experience in OCing XMS2 !!!
|
|
 Feb 4 2008, 03:16 PM
Return to original view | Post
#1
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6  
|
Can I join??
RAM: CORSAIR Twin2x1024A-6400 ver 4.1 Frequency: 400 Timing: 4-4-4-12-2T Vdimm: 2.2v
-pWs- This post has been edited by -pWs-: Feb 4 2008, 03:17 PM |
Quote|
|
|
|
|
Feb 4 2008, 04:24 PM
Return to original view | Post
#2
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(capriodimitri @ Feb 4 2008, 03:24 PM) Bro, are you using the mainstream Twin2X with the black heat spreader? I believe can run 4-4-4-12 at 2.1V and slightly lower at 400mhz. I run fine at 412mhz at CL4 on 2.1V but I think mine is rev 5.1, promos chip. I did try 1000Mhz w CAS5. Higher than that, never try.Kindly advise the maximum speed I can go. Currently running 470mhz at CL5 on 1.95V.  My Vdimm high maybe because of i running 4 sticks of TwinX that time.  QUOTE(renesisx @ Feb 4 2008, 03:30 PM) mine's xms2 DHX..but run at 5-5-5-18 n 1.8v..tried to set it to 4-4-4-12 but failed..any idea? spec as in my siggy.. Do you add Vdimm?  -pWs- |
|
|
Feb 4 2008, 04:32 PM
Return to original view | Post
#3
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(general_odin @ Feb 4 2008, 04:26 PM) nice.... situation gets heated up now little... Your hardware details??good... i wanna tweak my XMS2 Twin 2x 2048-6400C5 DHX 800Mhz, what can i do about it? anyone help out here... I heard that Intel platform uses less Vdimm [same frequency same timing] if compared to AMD platform.  -pWs- |
|
|
Feb 4 2008, 08:24 PM
Return to original view | Post
#4
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(bryanyeo87 @ Feb 4 2008, 06:39 PM) tahts because intel chipsets use 2T timings instead of 1T, but for intel, it makes little difference Ermm...how about AMD also use 2T ???-pWs- This post has been edited by -pWs-: Feb 4 2008, 08:24 PM |
|
|
Feb 5 2008, 01:20 AM
Return to original view | Post
#5
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(general_odin @ Feb 4 2008, 10:37 PM) wahh!!! nice overclocking... 1035MHz... so means my XMS2 Twin 2x 2048-6400C5 DHX can go up to 1024MHz too.... wa nice results there  QUOTE(Hoodlums @ Feb 4 2008, 11:24 PM) Can't over 1100Mhz? Ermm Hmm.. I think it depends on chipset. QUOTE(general_odin @ Feb 4 2008, 11:35 PM) why not? max you may go is 1200MHz, need to increase voltage la.... I think it is hard to achieve 1200MHz unless ram w D9 chipset [D9GMH only available in version 1.x]and your motherboard must also be able to support it... i dont think anyone dares to do that rite.... anyone done that B4 ? Not sure about DHX using what chipset.  -pWs- |
|
|
Feb 5 2008, 07:45 PM
Return to original view | Post
#6
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
What platform you use?
You will probably need more Vdimm to achieve that speed and timing if using AMD platform due to the memory controller. -pWs- |
|
|
|
|
|
Feb 6 2008, 12:10 AM
Return to original view | Post
#7
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(renesisx @ Feb 5 2008, 08:48 PM) can we simlpy change the vdimm? i tried b4..but failed..dunno why.. What you done? Just add Vdimm?Failed meant?? QUOTE(general_odin @ Feb 5 2008, 09:56 PM) Gigabyte EP35-DS3 Can. But dun hope too high and Intel Core 2 Duo E8200... is it possible if i leave my Vdimm to stock settings??? i dun want to kill my ram... QUOTE(Ezonizs @ Feb 5 2008, 10:08 PM) ALL Corsair XMS2 with DHX or without Revision 1.0 is using Micron chipset ~~~ Revision 2.0 above is using Promos Nice info  -pWs- |
|
|
Feb 6 2008, 09:24 AM
Return to original view | Post
#8
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(renesisx @ Feb 6 2008, 03:07 AM) increase the vdimm to 1.95v and timing to 4-4-4-12 as well..but fail to reboot..is it ram or my mobo problem? Tried 2.0v or 2.1v already?? btw, promos chipset is not good to oc?how to know the revision of my ram? -pWs- |
|
|
Feb 17 2008, 09:29 PM
Return to original view | Post
#9
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(lotr_tm @ Feb 17 2008, 09:25 PM) r u sure i can up the vdimm to 2.2V w/o anyprob?my ram is xms2 pc2 6400..if rise to 2.2v,how about their temp?it ok with stock black spreader stock? Overclock take risks. Bear in mind Nothing is sure. Some ram even spoilt in non-oc condition. If you want go beyond stock Vdimm, it is better to have active cooling. -pWs- |
|
|
Feb 22 2008, 01:54 PM
Return to original view | Post
#10
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Ermm...what ram you bought??
Impossible so low wor. -pWs- |
|
|
Jul 20 2008, 09:18 AM
Return to original view | Post
#11
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Show us the CPU-z SPD page.
-pWs- |
|
Topic ClosedOptions
|
| Change to: |  0.0181sec
 0.62
 7 queries
 GZIP Disabled
Time is now: 13th December 2025 - 04:46 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.