your chipset fan, 60mm or 70mm maybe... i think much better if get thin profile fan there

Can tahan the noise or not ? I can't stand the whirring sound. Mine is still so "untouched", finding time to play with it soon.

mine 60mm...t= 30mm...

sure can...no prob with it...coz my ceiling fan much noisy than it...

me also not mind about the noise.

anyway,tapirus,do u have HR-05 to try fit on it?
cause hard to find U6 now

, i can hear the "weeeeee" sound even 2 feets away , but not a problem though... i love that sound, it tells me... "i'm up and running"

if you know what i mean...

the non-SLI HR-05/IFX surely can fit, the only thing i concern is... the possibilities to touch either the graphic card PCB or RAM area and CPU area , this is much worse when comes with big CPU HSF such as IFX-14, TRUE and so on... gosh... i miss my Mars, frankly speaking... Mars got the best board layout i ever see

thx bro still learning to do cable management..yup mod my mobo tray with sum holes damn very tebal the tray the cable route under the mobo and mobo tray as i dont much much cable route under the mobo..sure they can fit..im using 1" mobo stand will pos the result later bro as the rig im still working to finished up my mod

@tapirus
weh fan nb tu trus ngadap pcb gfx wat pa..huhu sux panas gfx tala bagi kt NB plak?

dun have bro..but maybe can try it...i try ask my fren 1st..he have it...update u later...

aku xsux pn..aku blow p gfx..kat gfx aku sux kuar dr side panel..ok ker???

but the NB fan is too close with the gfx, which means the hot air is basically transferring some amount of the NB heat to the back of the gfx...
my setup is: the NB fan is facing the CPU, and the fan is placed between the NB and CPU...sucking the hot air from NB, and blowing it to CPU Heatsink, then a 120mm sucking the hot air from the CPU hs to the 2 x 120mm top exhaust fans...so basically,

GFX - NB -[fan]-> CPU HS -[fan]-> Exhaust Fans --> out

---

Added on February 19, 2008, 5:38 pmic...ic...hopefully u can post more pics...maybe i can copy u later

@others, sorry for the OT discussion...just trying to keep the thread alive

This post has been edited by remysix: Feb 19 2008, 05:38 PM

@remsyx
mine also like ur..just my NB near gfx...fan from nb blow to cpu...then cpu fan will sux out to back casing...just fan from nb also sux out heat from gfx...no more space to put between NB cooler and xtreme...

ic...ic...really tight space huh...
anyway, currently priming my quaddy at 3.5G...really hate the vdroop...idle 1.42v, load at 1.37v...50mV diff...

tapirus
i'm waiting u to get one of the HR-05 IFX to update me
next TT i belanja u makan

my bios setting, voltage for CPU add = +75mV (1.34V )



my rig

oledi tried my DKP35 today after got it from jy14 this evening

been struggle to boot it up in the 1st place as no display come out on my monitor....oh $hit...not like my previous NF4 lanparty again

tried with different gcard..then it's finally boot turn out my outdated 7300GT spoiled oledi...huhuhu...

thanks cstkl1 for assisting me on the phone scared the mobo spoiled as i'm replacing the NB heatsink with MCW30..(that's how my NF4 lanparty died)

tomorrow will boot the system up fully when my HDD arrive

prelimenary temp in the bios show 29c for e2140 on stocks speed / (Apogee GT) / NB Chipset 36c (MCW30)

eh guys...did u take off the white square rubber pad beneath the stock NB heatsink and reused it again beneath the new NB heatsink? i tried to peel it off but torn out in few places...then decide to leave it

This post has been edited by moderno: Feb 20 2008, 12:34 AM

then better leave the white rubber pad even u change to new hs.
it works better and safer that way

yeah...better leave it there coz when u tighted up the water block, u tend to tight the screw as much as possible...so, the Rubber Man might save the day...

I tried HR05 IFX/SLI on this DK, performance almost same as U6, both without using fan.

the rubber pad sticks on bottom of the stocks NB...not left on the chipset there....i tried to peel it off to put it back bu to no avail broke it to few pieces..

at the bottom of the stock NB heatsink, rite?...noticed that one...and since the HR05 came with the rubber pad, never bother with that one...but yes, really important to have it there...

just wanted to share some Genie BIOS page... the BIOS date is 24/12/07
the setting is @400x8 with tweaked here and there though...

current system setup


Genie BIOS Setting


CPU Feature


DRAM Timing


Clock Setting Fine Delay


Read Delay Phase Adjust


Voltage Setting


PC Health Status


POST

you guys no g00d,told me that TRUE cant install vertically on the DK.
but look at mine!!!!

anyway,i hate this mobo anyway,using only 4 layers PCB,the bios cannot undervolt the processor vcore,and sometime cannot boot up,stuck at the Dark logo screen there,have to reset and only can POST
have some vdrop on quaddie,will try to prime and see the exact vdrop tonight.

and one thing,how u guys update bios?