some noob question here, i get my e8400 oc to 4.05ghz stable with 8 hours prime, small in place FFT, large fft and blend test... and memtest as well, but still getting random BSOD after playing heavy 3D applications games such as crysis... problem solve when using my 2gb Crucial 10th Anniversary RAM but i couldnt get the TEAM Elite 4gb kit stable even on stock settings, 3ghz, DDR2 800. what made the matter worst is the ram are passed all memtest... but keep crashing on certain level of crysis but not for 2gb of ram... main point is do i need to increase NB volt to get 4gb stable on my system, its impossible the ram passed all test but random restart playing heavy 3d Games... i am using ASUS Blitz Formula Mobo... and also what's the safe 24/7 voltage for NB?

@mfcm

3.8ghz @ 1.18v ... ultra low vcore.... good proc u got there bro... any secrets to getting that low vcore? 

im abit surprise coz its passed..jus gv try...but for 445x9(4ghz) seem cant do with same vcore...now priming 4ghz on 1.232v...oredi passed 2hours...wait till toinite..c how

@ice
no hidden or secret ways i done..jus do wat my frens told n guide from other forumer here

@cstkl1
yeah seem i nonid to change mobo lor

btw failed prime after 5hours 45min for 1.232v 4ghz tryin feed abit more vcore now..1.248v load

for 450x8.5 oredi passes 12hours prime.using 1.2v stock vcore in bios n idle..load 1.184v..both NB 1.33v
tryin to get same vcore for 445x9 seem cant..so up abit my vcore..now prime with 1.232v load will wait pass or not

walao wehh.. my frend already grab penryn
seems ur proc batch cun..

happy overclocking!!   

I have to say that your CPU is indeed a good one Plenty of potential to go 4.3Ghz stable.

kekekeke itchy hand seeing other oc this proc..then decide to get a unit thx bro
thx bro..still tweak for it..mite need favor from all of u here will try later for more clock

btw tried 445x9 1.232v load but failed after 5hours..so up vcore abit to 1.248v load..here the result

awesome
but for vcore failure
u can go back to 1.232
and mess with ure gtl settings

u should be able to use 1.232v

u mean i need to adjust my gtl abit?increase it?coz iinm its oredi highest in the setting..0.67..or any advise bout that bro?    

u mean i need to adjust my gtl abit?increase it?coz iinm its oredi highest in the setting..0.67..or any advise bout that bro?    

GTL is more of fine tuning and if upping your Vcore solves the problem, I don't think you have to spend unnecessary time doing that GTL tweaking. For example if you need 1.3V to run stable, tweaking GTL would not get you to run stock 1.2V stable anyway Plus, not all motherboards have GTL settings so the person that advised you to do so missed out this very important point or is either assuming everyone here owns an Asus motherboard like himself.

Nevertheless, there's no harm playing with GTL at a later stage - when we have nothing better to do

yup not all mobo got this option of setting...

donno is this ok to read our temp or not..mayb we can try..im trying now :
<<REAL TEMP>>

eh...
are u guys sleeping on dope or something

that dfi mobo has one of the most widest range of tweaking.
heck if he wanted to do plug and play then whats the point of getting that dfi mobo??
if overvolting  is good for u.. go ahead..
no wonder u guys rma ure boards so much..

---

Added on March 2, 2008, 9:24 pm
the asus cpu temp has always been 10C less than Core temp.

im not talking bout dfi ....sure dfi has it....i think u "rabun" la....read correctly...i said "not all mobo" have that option ...aiyoo...

unlucky u at 5 hours
try messing with ure termination value and gtl.

yeah bro try it...