haha.. i also same..

many problem for itchy hands..

Guys, please bear in mind.

A LOT of the problems usually comes from the not-so-clear instructions they currently have online. Are the instructions going to get better? I highly doubt it - up till now I haven't seen a complete guide for jailbreaking any versions - there's always some minor detail missing out in one guide that I can find in another.

I would say a majority of the problems you see here are mostly a result of 'upgrades' - because of the various amazing and wonderful things you can do to your iPhone, you can't expect a simple-script file to upgrade everything perfectly. So there WILL be problems if you upgrade from a not-so-pristine version of iPhone.

Also if you don't do this upgrade exercise often enough and get familiar with yourself on how the iPhone really works, it's just going to get more and more 'risky' for you.

As with all upgrades, backup all your contacts information and everything and you should be fine! Just remember, "if it can go wrong IT WILL!" - so allocate yourself a few extra hours if you're going to jailbreak to 1.1.3 - all hacks are like that.

Currently, as of now the official jailbreak from the devteam have only a few valid issues. The rest of the issues brought up are mostly from people upgrading from their own mangled-up iPhones. I've gone from 1.1.1 to 1.1.3 and back and forth so many times it's almost second nature for me now to restore and recover - and to do it from a pristine iPhone, I would say the results are *very* predictable. You'll always know how the outcome will be after a few times.

Now onward to the "valid" problems if you upgraded from a pristine iPhone would be the following thus far..

1. Contacts won't sync. But there's already a patch out.
2. AppSupport - some of you guys say it doesn't work - double check the permissions! Look here - http://www.hackint0sh.org/forum/showthread.php?t=25487
3. Wifi settings works for me! And they're retained properly too. So if yours doesn't, it's quite likely you messed up somewhere.
4. Installer app won't install anything - you never upgrade to latest Installer before going to 1.1.3.. you'll have to restore and do it again very likely! Just to make sure everything's A-okay
5. Google locate doesn't work - install LocateMe or Navizon and it'll be fixed.

Here's a thread that might help you all
http://www.hackint0sh.org/forum/showthread.php?t=26054

For those of you attempting to upgrade yourself for the first time, it's VERY IMPORTANT to know your roots! (eg. how was your iPhone jailbroken in the first place. Did you do it yourself? Which method did you use? From which version etc?) - as how it was done prior to this, will affect the outcome of your 1.1.3 jailbreak.

Also this phone wasn't really made for use in Malaysia - so those of you with localized telco problem, it is kinda 'expected' but I'm sure that's what we're all here for right? To share fixes that is applicable for our own local telcos

Bottomline - if you don't learn it the hard way, it'll always feel "risky" - so the only way to take care of 'gatal tangan' is just to scratch it regularly!

(Bluetooth is working fine for me - though there's a post saying that you just need to reset the iPhone and resync with your bluetooth device to make it work? or something like that - it's one of those 'rarer' problems)

For those of you who went to 1.1.3 and didn't like it and want to get back..

If you ibrickr/devteam jailbreaked it to 1.1.3.. restoring to 1.1.1 I can say is very simple. Put phone in DFU mode, shift-restore to 1.1.1. You might need to downgrade the baseband (i.unlock.no repository has it) as well for it to work in 1.1.1 (since it's likely you guys have 1.1.2 version of baseband). I don't quite know if a direct downgrade to 1.1.2 is possible? I wouldn't really know how to jailbreak it directly from 1.1.2? I do believe you have to go to 1.1.1, oktoprep it then go back to 1.1.2.. so yeah...

If it's a case of accidentally UPGRADED to 1.1.3 via Itunes, you probably going to have the new baseband and you will need to do a baseband downgrade.

Oh one more thing, to those of you guys looking for help, you REALLY have to put more effort into telling us what went wrong, and how you did what you did to get to where you are now. What were you doing before. You can't just tell us "Help my 1.1.3 is not working!"... just like how you can't tell a doctor "I feel funny here today.."

You gotta give us more to work on!

---

Added on January 29, 2008, 3:51 amDepending on HOW you went to 1.1.3 in the first place. Was it a jailbreak, or did you officially upgrade?

If it was jailbreak, here's how I would do it, there's probably a better method out there..

1. Put phone in DFU mode.
2. iTunes shift-restore to 1.1.1. Probably get error, use Ibrickr 0.91 to get out of that funny recovery mode
3. Jailbreak usual normal means *#301# etc..
4. Install BSD sub, update installer, get oktoprep
5. If need to downgrade baseband to 1.1.1's version
6. Shift-UPDATE to 1.1.2, jailbreak using touchfree, get anysim 1.2.1u, turn on airplane mode and run it to unlock baseband if necessary..

That should be it ! (ps -your Google-Fu is weak.. train up more! tons of stuff on this 1.1.3->1.1.2 on the interweb! - even megatron posted a link about it in post #112.. not sure if your post was before or after his.. but try to read back acouple of posts back)

This post has been edited by tarpaucase: Jan 29 2008, 03:57 AM

i guess I miss the "If need to downgrade baseband to 1.1.1's version"

shit !

will re-do later

How to Fix Sync Problems After Official 1.1.3 Soft Jailbreak

Wahh.. it's been awhile since I last checked in. Any users (here) wanna share their experiences on the 1.1.3, besides battling with the appsupport & syncing issues?

In 1.1.2 there was a post in MMi about the perks of 1.1.2. i.e. phone more snappier, fsb increase etc. What about 1.1.3? Tried googling around but can only find description about the new functions for maps and springboard.

I m going to try a direct downgrade & restore to 1.1.1

Here's a few more fixes for more commonly known problems.

Term-vt100 cannot login.
Installer issues.. (people should just install BossTools 0.35 and move their stuff to the other partition right from the beginning.. what were these ppl thinking!)

upgraded to 1.1.3 using ibrickr 1.1.3 and soft upgrade from installer. 2 problem after upgrade.
1. unable to input the apn for my edge
2. caller id issue.

caller id i think i have some idea to fix. But this edge problem. anyone can help fix my edge?

Just go to Reset All Network Settings. reset, reboot, then u can save APN oredi

restore to 1.1.1

then use i.unlock.no to restore baseband

then restore again to 1.1.1

then jailbreak 1.1.1

then anysim 1.1.1

then Oktoprep

then "update" to 1.1.2

then jailbreak 1.1.2

then anysim1.2.1u

Actually some steps I marked below are not necessary during my .. bumbling of going up and down 1.1.1 and 1.1.3..

thanks bro ! HOPE EVERYONE LEARN & SHARE !!



now i m going to 1.1.3 using the dev team method

using

http://www.iclarified.com/entry/index.php?enid=611

---

Added on January 29, 2008, 10:54 amhttp://www.iclarified.com/entry/index.php?enid=610

going to use windows method

---

Added on January 29, 2008, 10:56 amdoing "sh install.sh" portion now


damm ...it looks like HANG in WINSCP putty screen

shit !

---

Added on January 29, 2008, 11:00 amthe console show "non responding"

SWEAT............


continue to wait or not ??

---

Added on January 29, 2008, 11:01 amHOLD MY HORSE

---

Added on January 29, 2008, 11:05 amNow I see the host not answer warning

I m patient to wait ............

---

Added on January 29, 2008, 11:11 amACTUALLY

i wanto comment

for the tutorial

i can see ppl dload speed at 1MB average

whereby for us just 50-60k

shit

duno the console will get time out & hang or not

I m still waiting

---

Added on January 29, 2008, 11:17 amIt is RUNNING

I can see it

damm...only 13% dload

shit

---

Added on January 29, 2008, 11:21 amnow 18%

SHIT

---

Added on January 29, 2008, 11:35 amcanot !!

FAILED

shall i try installer method??

---

Added on January 29, 2008, 11:39 aminstaller also same I pressumed as alot alot ppl doing it

NAH

I will go with nate-true one for the time-being

NOW IBRICKR again

This post has been edited by megatron007: Jan 29 2008, 11:39 AM

when i saw this i feel like laugh until i pee on my pant

http://www.morange.com/demo/pages/main.html

hahahahhaa
Your phone can be better than iPhone! Install Morange and be surprised by what it can do. Experience it today! It's FREE.

i think they are really sh never use iphone before

---

Added on January 29, 2008, 11:58 amsomemore if its good why they use iphone as the phone image?
[img=http://img295.imageshack.us/img295/4761/01ap2.th.jpg]


This post has been edited by siaukia: Jan 29 2008, 11:58 AM

LOL! I wudn mind installing it in my O2 Zinc to see what it's all about.

haha /lol

good one

Actually, mine uses lesser steps.

1. Restore 1.1.1
2. Jailbreak using jailbreakme.com
3. Install Oktoprep
4. Upgrade to 1.1.2
5. Jailbreak 1.1.2
6. At this point you're carrier should show up, without having to downgrade baseband or anything.
7. Jailbreak to 1.1.3 using Softupgrade

* You don't have to downgrade baseband because when you restore the firmware to 1.1.1, you are still on the 1.1.2 baseband. even if you updated to 1.1.3, your baseband is still a 1.1.2 baseband. So, basically your SIM is already unlocked, and it just needs the 1.1.2 firmware for the carrier to show.

This saves a lot of time if you plan to experiment with your 1.1.3>1.1.1>1.1.2>1.1.3

Hope this is helpful to all

I tried these matter at least 4 times

no kidding

but i got all the weird problem & unable to upgrade to 1.1.3

so anyone here mind to share wat is the best "method" to update to 1.1.3?

windows - via SCP?
installer?

i tried all tak jalan




end up using ibrickr nate method

This is exactly one of those minor details they left out. On some cases when you guys execute "sh install.sh".. your console will seem to have frozen 1-2 second into the execution - your window might even seem to have hanged and become not-responsive.. (for me it happened).. but it's still downloading - if your wifi connection is stable.

How do you check? Take putty for a spin! Go in, locate /var/private/ and do a ls -l continuously a few time and see if the file called "restore.zip" increases in size or not.

They ALWAYS redownload that silly firmware from Apple's site and it's DARN SLOW...

This is one way to check if it's still working or not - at least that's how I know

Can you list out what kind of error *exactly* in detail so we can know what problem you're facing exactly? Cause even error numbers that show up in iTunes will provide a big clue to what went wrong you know

So to answer the question on everyone's mind if 1.1.3 is worth it.. HELL yes it is! IF you are familiar with the process
To those using Nate's JB, just stick with Nate.. I think somehow it's a lot more compatible with the apps. I'm still having one or two small issues regarding apps on my devteam's version.. for example.. Locations 0.20 by Andreas Linde, the web-cam image grabbing programme, kicks back out to desktop everytime it's executed.. sigh.

This post has been edited by tarpaucase: Jan 29 2008, 03:26 PM

Well, thanks for the post tarpaucase -- but I've followed all the directions carefully, including chmoding the AppSupport file to 755 and the problem persists. The really annoying thing now is that my WiFi security settings are lost every time I disconnect from my router, so I have to input a 20 numerical key everytime i want to connect, which is ridiculous!

I've managed to fix youtube and google maps with the fixes out there.

SMS caller id matching isn't so much a big deal, at least my phone numbers match.

I would wait for a proper release with all the bugs ironed out -- 1.1.3 just breaks too many internal rules. In fact, I would wait for the SDK release ; if you have 1.1.2 don't upgrade just yet.

tarpaucase bro

yea

i m now at Nate's JB.....stable & installed a few Apps & tried