since now u not using the ur CD63 analog stage .... i think u try n see hehehe me plan for earth i scared moon is too dull n too warm due original CD63 are slow n warm already but i will bypass original CD63 HDAM n replace with Earth

---

Added on October 17, 2008, 1:20 pmi know this owner .... heheheh he told me early he sell this Zero he got few CDP for sale also

This post has been edited by abel: Oct 17 2008, 01:23 PM

MY CD63 mod already bypass the original HDAM soon replace with EARTH or SUN or MOON stil dunno who can borrow me to test hehehe
currently i using LT1358


This post has been edited by abel: Oct 18 2008, 05:07 PM

sound more open n transparent and got detail bass are more solid n deeper , i disable mute function but one thing when off the cdp must lower the amp volume if not got buzzing sound

This post has been edited by abel: Oct 18 2008, 08:45 PM

yeah just check ur original can support for audio-gd opamp


This post has been edited by abel: Oct 18 2008, 09:58 PM

borrow from fren 2 EARTH to try .... much more improve bass more deep and got energy hhehe who can borrow me SUN n MOON


This post has been edited by abel: Oct 20 2008, 03:10 PM

is better connect to ground .... i take from RCA ground not casing or earth

my zero dont used already hheehe i modding my CD63 sound much more better than i go to zero
chua already get poison with my CD63 with EARTH but he say the sound abit slow just not dynamic enuf but i like it just different ppl different taste

the gound is located at the bottom u just take out the board and solder 1 wire out i found when not ground it the sound abit blur (MCC aka mong cha cha)

if i not mistaken check the image below maybe u can double confirm with chua


This post has been edited by abel: Oct 20 2008, 03:20 AM

hehehe ccschua maybe my fren wanna order all the 3 opamp hahahah

nope that is earth point not ground

This post has been edited by abel: Oct 22 2008, 12:11 AM

yeah actually my fren want it he want 2 x moon , 2 x sun , 2 x earth and i want clock steve ada discount or not ah heheheh

i dont have all i just have small amount of the cap

deleted

This post has been edited by abel: Oct 24 2008, 02:16 AM

i think wanna get 4 SUN , EARTH trying now , Moon not suite my player

wut cap is this .... try to find those are low ESR

why go for digikey they if those Elna only i get from oversea
u can try or this got Elna , Rubycon , Nichicon Muse etc.. but not all value available
http://hk.geocities.com/wkchenghk2000/orderformEng.htm

try farnell for more choice u just can try Panasonic FC . Rubycon ZL/ZA/ZLH this are low ESR good for PSU section

Example try to look for the impedance
* CAPACITOR, 4700UF, 10V
* Application:High Temperature
* Capacitance:4700µF
* Tolerance, capacitance:±20%
* Series:ZL
* Voltage, rating:10V dc
* Capacitor dielectric type:Aluminium Electrolytic
* Case style:Radial
* Pitch, lead:5mm
* Temperature, operating range:-40°C to +105°C
* Current, leakage:470µA
* Current, ripple AC:3400mA
* Diameter, body:12.5mm
* Diameter, lead:0.8mm
* Frequency, impedance:100kHz
* Frequency, ripple current:100kHz
* Impedance:0.015ohm <-- lower is better
* Length / Height, external:35mm
* Temp, op. max:105°C
* Temp, op. min:-40°C
* Temperature, impedance:20°C
* Temperature, ripple current:105°C
* Terminal type:Wire Ended
* Time, operating life:5000h
* Tolerance, +:20%
* Tolerance, -:20%
* Voltage rating, DC:10V

Panasonic FC and Elna RJH

Rubycon ZL


This post has been edited by abel: Oct 25 2008, 06:43 PM

i need ask kingwa about modification first ... thanks my fren want it and me also

and dont for get put some silver wire get the 0.3mm for the rca OUT sound will improve

---

Added on October 27, 2008, 10:03 amyeah OS-CON very good for DAC farnell got alot heheh but oscon dont have high value i think just until 470uf

http://my.farnell.com/jsp/search/browse.js...equestid=396852

---

Added on October 27, 2008, 10:15 amyeah .. now new Panasonic FM i see the spec is not bad the ESR is lower and size are smaller even price is cheaper than FC ??? but dunno about quality but i prefer Panasonic FC

This post has been edited by abel: Oct 27 2008, 10:16 AM

for better voltage ... its already say Ultra Fast just check the model of the diode example UF4001 - the front written UF means Ultra Fast

ok for me Panasonic i normally put on the PSU section due the value is high and Elna Silmic hard to get on big value n the price ..... Elna Silmic or Silmic II i put on analog section like opamp coupling and clock , DAC try to couple with OS-CON ,

This post has been edited by abel: Oct 29 2008, 08:55 AM

yeah i saw some ppl bypass with ceramic cap.

is no problem ... even my CD63 original just using 470uf 35v Elna Silmic i replace with Panasonic FC 3300uf 35v the bass are more deep and got more energy i found some on the website some mat salleh put 4700uf 35v the voltage better use the higher like empire say those voltage are normally unstable will load very high ... like my fren saw before he got using Voltage Regulator for his main plug to his equipment he saw his meter some time is go up to 260v AC and normal we only 220v-230v even sometime is low

This post has been edited by abel: Oct 30 2008, 09:49 AM