BTW either i using 1k Mhz or 1.5K Mhz in HT link the n/b temp also same = =

Biostar T550 v1.3 ..

My ClockGen auto-detect it .. Nvidia MCP55 ..

Argh ~ Orthos Fail fail fail at 3051MHz ..Later angry already pump 1.6v into processor..

Must be the damn Tforce550 cannot over 287HTT ..

This post has been edited by Amedion: Feb 17 2008, 01:23 PM

Now my system doesnt boot. I dont know what's the problem.

Reset CMOS - failed.
Install only one stick of ram - failed.
Dissemble all hardwares and put it back - failed.
Install and uninstall processor - failed.

Now I dont know what to do. Both of the red LED on TA690G dont show anything.

any sound beeps?

any spare chip to boot with?

Yeah almost forgot. Will use my 4000+.

Mangkok Ayon - Nope. Nothing, after switch on the power - cooler running, graphic card running, but no boot at all.

Bro, do u mind if i ask wat vcore u use for 3.11Ghz?

Update : Tried with other proc, and same thing happens - which is nothing happens. Issit because of mobo ? If it does I'll go LYP and claim for warranty then. But RMA process should be damn long

This post has been edited by mizivincible: Feb 17 2008, 01:51 PM

What you did ?

i set in bios 1.5v but in CPU-Z 1.52...this mobo overvolts itself

contact alphamatic
i settled my rma in one day.

http://www.alphamatic.com.my/contactus.asp

Really ? Are they replacing new mobo for you ? And would you say its the mobo the culprit bro ?

When I switch on -

cooler fans running
gc running
no red LED (both)

Tried with other proc, still same
Swap ram slot, same
Dissemble all parts and install back, fail too.

This is symptom of ?

EDITED : Went thru Alphamatic website - But, what its related to Biostar product bro DB ?

This post has been edited by mizivincible: Feb 17 2008, 02:06 PM

Oh.. My mobo also overvolts by itself..

Current voltage is 1.6v .. I guess my motherboard cannot support more than 280HTT.. Fail in Orthos..

Want to find TA690 already lar..

---

Added on February 17, 2008, 2:07 pmTake out battery and leave it for 3 minutes then try again?

This post has been edited by Amedion: Feb 17 2008, 02:07 PM

ok bro..now u got the same problem with me..no boot at all rite?is the power led keep on flashing?
the mobo led show u something or not?ive tried reassemble and every thing..but still cant..try with another proc,still cant..change the ram,still cant..seems like my mobo keep restarting..hate it..

Ermm...Alphamatics is the supplier of DFI n Biostar I think.

-pWs-

try increasing ur chipset voltage.

The power LED doesnt lit at all (both red led) and no nothing. The thing is my gc and cooler are running. Tried everything still cant. Now I only suspect mobo problem. No boot at all. Dang

---

Added on February 17, 2008, 2:33 pmOwh rilly ? If they can RMA in one day like bro db said then should be solution ! Still waiting for db confirmation.

---

Added on February 17, 2008, 2:34 pmSure bro, will try now while having breakfast. Hungry

This post has been edited by mizivincible: Feb 17 2008, 02:34 PM

All voltage Maxed out ..

OR maybe my Strider 400w not enuff juice?

done testing stay at 3.12ghz f0r 24/7, no mood for oc
for my gf rig (ta690g, 10th anni, le1620)

Guys,
Please continue here.
AMD(R) Socket-AM2/AM2+ Overclocking thread (V6) : http://forum.lowyat.net/topic/633225

-pWs-