anybody knows what is my problem?
bout my mobo that got problem..ive posted it few pages ago

This post has been edited by alive88: Feb 16 2008, 11:11 PM

i don't see any reason for you to lower down the HT Link
TA690G's HT Link can be oced to 1500MHz and use for 24/7 if you want to

edited: make sure the NB is not overheat ya

This post has been edited by dblooi: Feb 16 2008, 11:12 PM

Hahaha...I will compile most probably @ 3-4am.
Take your time bro.

I will browse through each page by page.
Any ss that fulfils the requirement will be added. No worry

-pWs-

But temp above 55C for load kinda too high for me

I prefer to keep HTL below 1000MHz, don't feel like exceeding it. A bit maybe acceptable

Thanks. i never touched 1200mhz before. The highest is 1066mhz. I think I'll use 533 divider then. CL4 ? Will try with 4-4-4-5-11 then. 900mhz should be nice paired with 3.6 (if achievable la) haha.

Anyway, issit the stock speed only uses 1.16v ? mine is like that one. If wanna start oc I straight pump until 1.26v.

---

Added on February 16, 2008, 11:26 pmYours will never touch 55c la got super fast fans hahaha

This post has been edited by mizivincible: Feb 16 2008, 11:28 PM

VID for you proc is 1.2v
your mobo has voltage drop issue

I see, because I read last time about the voltage drop, and I thought it was abit only, didnt expect that much.

Edited : Aside from running naked system, I add up another table fan blowing towards my system. Hope this helps since db said cooling is the key

This post has been edited by mizivincible: Feb 17 2008, 12:09 AM

From my experience , air cooling/water cooling itself is not efficient enough for 3.6GHz
i always fail to boot into windows due to high temp.
min requirement is air cond + air cooling,
but that don't work for 3.7GHz above..
3.7GHz above i need water cooler + ais in order to boot into windows
btw are you using TA690G?

Ic, got it. And my hall aircond the remote got problem pulak, if not can switch on

Yes I am using TA690G. Any good tips to share sifu ?

Just now with the tight timing at 2.8ghz dont know why stucked at windows loading there. I reset and now try with 4-4-4-12-16, trfc changed to 195 and mal to 10. Start pushing again.

what's the ram chipset of your ram?


This is SS from me, hope it helps
From SS shown by bro sempronic previously,
your proc is on par v mine

Bro DB, im not really sure what is the chipset of my ram. How to determine the chipset ? this is my ram - http://guru3d.com/article/memory/476/1

And thanks for the ss. Sure it helps alot.

p/s : proc is on par but not the owner hehehe, I still need to learn alot, I mean alot from you guys.

The easiest way is take off the heatspreader and take a look,
in condition the ram chipset is not relabeled.
If it's relabeled , then you need to look at the side of the ram chipset to find out the orientation of the metal dots ( trust me, this is hard )

here's an example, how to find out D9 ram chipset without looking at the label



But i don't think D9GMH, D9GKX and D9GCT come in 2GB set

Also, take off the heatspreader might lead you to warranty void.
In that case, the only thing you can do is try to google search for its chipset

This post has been edited by dblooi: Feb 17 2008, 01:13 AM

Yup...D9 does not come in 2GB set.

-pWs-

Yeah that's the only way I know but taking out the heatspreader Just got it few days. After few loop of google also didnt find any. Will try to look harder.

Edited : with 4-4-4-12-16 at 2.8 already BSOD. Now trying with other timing as well. Do I need to change the trfc too ?

This post has been edited by mizivincible: Feb 17 2008, 01:27 AM

@-pWs-
here is my 2nd rig oc result....
u r rite the temp Core1 and Core 2 in brisbane G2 5000+BE read different

Proc =5000+BE Brisbane G2 @3.2g
Mobo =Biostar TA770A2+
Ram =2x1Gb Aeneon DDRII 800Mhz Timing 5/5/5/18/24
HSF = Cooler Master Hyper TX 2



Later will try oc with lower multipier and higher fsb
but nid to change the ram 1st

This post has been edited by digswell: Feb 17 2008, 01:36 AM

@-pws-

Here's my Superpi 32m Screenie


Will try to push this baby further when i have time.

Now rams on 2v. Wanna see if i can hit 1200Mhz on 2.1/2.2...
Really regreted taking only 2 during those times, should have bought more of them.
How often do you find value rams which can go this far...

Wow

May i know what voltage u use. Either way mine seems to die at arnd 900mhz

Everything stock ...

Bro what mobo are u using? Sigh, I wanna use clockgen as well but for some reason it doesnt work with my mobo

That one I was talking about when I use stock HSF. 55c already too hot for me. Now no more, got super duper uber fast fans