no money d,later i bought new hfs

btw how much vcore do u need for ur 5000+ BE @3.2ghz?

This post has been edited by noobianz: Feb 12 2008, 11:24 PM

stock vcore for 5000+be is 1.35
if wan oc to 3.2g ..for my ta770 mobo only use 1.425
u can try from 1.4 1st if can pump again to 1.425 and....until it stable with pass ORTHOS and super_pi

bro, which proc you get the temp huh?

my f3 OC to 3GHz with default Vcore and cool with mid-end WC also can't get that low..read with coretemp!

@ongbs - i think wat digswell said is true since im also using 5000+ BE@3.0ghz with crappy HSF @stock vcore get around 36degrees when idle...furthermore, IIANM 3800 f3 tdp is 65w which is same as 5000+ BE @stock vcore n clock..n even @3.0ghz,5000+ BE only consume around 77watt which makes it cooler than 3800+ F3@3.0ghz

This post has been edited by noobianz: Feb 13 2008, 12:12 AM

BE is Brisbane core

-pWs-

Use Core Temp for reading temp ? Brisbane having problem with DTS, so I use Everest Ultimate. Is it reliable to monitor CPU temp ? Coz night time my idle is 21-24C, 25% OC @ stock vcore. Day time around 28-30C

i use hardwaremonitor instead...i think brisbane DTS is not reliable

This post has been edited by noobianz: Feb 13 2008, 12:26 AM

just installed my water cooling kit. Bro dblooi, can you teach me how to insulate proc area if i want to use ice on my WC system?

hehe the 5000+be g2 temp is not very correct....i use extenal temp sesor to read my 5000+be core temp

the external temp sensor read 4 or 5 c higher

hey bro, my 5000+be temp reading is 55c idle, core1 23c core2 26c.. how come different 30c? is it something wrong?

hehehe.....is like tat la...my 5000+be oso same
the new phenom oso like tat

Dont know about the Brisbane DTS, some said that only using measuring tool (thermometer) on the proc then only we know the correct temp. My 4000+ during stock is at 25.28 idle, 38 load at 2.85ghz @ 1.31v, 34 idle, 51 load at 3.0@1.45v all idle temp cooled by GeminII with two Sanyo Denki H Series.

p/s : Just came back from meeting Sempronic, wait for his result on his latest project

wah wat project? mind telling me? he2ueh, btw guys, Now I set the vcore to 1.525 jus to make the processor stable at 2.5 ghz..he2ueh, f2 stepping is really 2 nice my temp is 64 during load time...hahah, but so far ok.. LOL

1.5v is too high on air cooling, furthermore it touches 64degree celcius. I hope you arent using it for 24/7

Wat project ? Stay tuned, later he scold me for bocor rahsia

waaa..already use WC...post ur result here later..wanna see
p/s:after this ur gng to use DI plak eh?keep following ur master..

No wonder, the internal core temp should be higher a bit than external thermometer reading
I believe you add another 5 to 10C for external thermometer reading will be close to internal core temp.
Especially during max load, the internal core temp tend to change faster but it reflect the changes slower on thermometer.

---

Added on February 13, 2008, 4:41 amMind to share your WC setup bro?

This post has been edited by ongbs: Feb 13 2008, 04:41 AM

AMD Athlon X2 5000+ BE | noobianz | biostar tf560 a2+ | Corsair Value Ram | DDR670 | 5-5-5-15 | Crappy HSF which im not sure wut brand

pws,add me in the list

Rise and shine =)

Last night was my 4000+ retiring OC. Will sell off the proc after this

Here's a screenshot. With OCZ 4GB Dual Channel DDR2 800Mhz PC2-6400 SLI-Ready Edition that I received yesterday.



3DMark06


Will start on "new" overclocking session soon

hey y just 3g only ???
sould be at 3.2g or higher
malu la if BE only oc 3g

---

Added on February 13, 2008, 11:34 amBecareful ur cpu temp reading....better use ur hand to feel it
temp reading wrong liao
read the yesterday night thread...it might help u to understand

This post has been edited by digswell: Feb 13 2008, 11:34 AM

Yerp, Im fully aware of that. And no, it doesnt feel hot, abit warm, and that's during night, late in the morning.

Lapped + GeminII with Sanyo Denki H Series

But that will be the last result for my 4000+.

This post has been edited by mizivincible: Feb 13 2008, 11:43 AM