Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 AMDŽ Socket-AM2/AM2+ Overclocking thread (V5), FTW...

views
     
hengmy
post Jan 22 2008, 12:47 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
3.2ghz on 5000+ be.. dont dare to push higher coz my psu only cm 380w extreme =.=
AMD Athlon 5000+ be @ 3.2
Biostar Tforce 6100 AM2
OCZ value pro 2x1gb kit
TTBTVX
anyone know how high can it do on air?


Attached thumbnail(s)
Attached Image
hengmy
post Jan 22 2008, 12:51 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
core temp is under 40 full load.. under 20 idle..
hengmy
post Jan 22 2008, 01:07 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(-pWs- @ Jan 22 2008, 12:58 AM)
So low?? Is it in aircond room?
Mind to attach some screenie??

Does Brisby G2 have the DTS fix?? hmm.gif

-pWs-
*
what is DTS? i use coretemp to monitor...
now open case more cold... the room is no aircon, me n my fren feel vr hot now... cant sleep... mad.gif


Attached thumbnail(s)
Attached Image Attached Image
hengmy
post Jan 22 2008, 01:15 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
i not sure it correct o not but when i touch heatsink when idle dont feel warm at all... b4 i can use stock sempron hsf to cold @ 3.1.. but 3.2 will hang and restart.. the temp that time is 50+
hengmy
post Jan 22 2008, 01:23 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(-pWs- @ Jan 22 2008, 01:20 AM)
Ermmm..better be careful IMO. smile.gif
I see.  wink.gif

-pWs-
*
yea.. when full load i will touch the heatsink to see wheather too hot o not...
hengmy
post Jan 22 2008, 01:37 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(ocz @ Jan 22 2008, 01:30 AM)
I wish my F3 runs with this temp. wink.gif
What cooler are u currently using??
*
what is your F3 temp?
i am using tt big typhoon vx
hengmy
post Jan 22 2008, 01:49 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(siaokialeong @ Jan 22 2008, 01:42 AM)
ya..seem like G2 still got d same problem as G1...but d software provided by biostar should b accurate lor...hoho..my 24/7 run spec -.-
*
so scare also it not accurate... but touch when full load also warm only.. dont know will the heat not tranfers to the heatsink??
hengmy
post Jan 22 2008, 12:13 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(siaokialeong @ Jan 22 2008, 10:32 AM)
HOHOHO...should b accurate,coz my temp reading on my heat sink is about 38c lor~~weee..and d software show me btw 40-42 when full load tongue.gif
*
if accurate then it can go higher on air lo thumbup.gif
hengmy
post Jan 22 2008, 03:04 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(dblooi @ Jan 22 2008, 02:50 PM)
yeah you're right.
IHS= Integrated Heat Spreader  icon_rolleyes.gif
*
bro, y nid to remove the IHS??
hengmy
post Jan 24 2008, 10:06 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(xixo_12 @ Jan 24 2008, 10:03 PM)
tight the ram timing.. increase at 2.0v
*
brisbane should can do 3.2 @ 1.425v..
hengmy
post Jan 29 2008, 07:35 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
hi bro nadeng1987, i wan to ask about the psu u using now.. the enermax 460 fma II ddx.. is it can provide stable high 12v rail? after over clocking n full load the system? can show me the 12v rail ar? i going to get one scare not good.. thx in advance...
hengmy
post Jan 29 2008, 08:06 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(ah_khoo @ Jan 29 2008, 08:02 PM)
if d amperage of +12v is more than 30A i would say d psu gonna be a decent one.  smile.gif
*
i mean when full load, will the 12v drop fr 12 to 11.9, 11.8 etc.. how much will the fma drop?
hengmy
post Feb 1 2008, 01:43 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(digswell @ Feb 1 2008, 01:01 AM)
tat temp is IDE...WHEN load time bout 30 min with ORTHOS ..i hv use my hand touch b4..feel warn only ..i think bout below 50 .. then everest read 48c
sori..i no hv screen shoot for load ..maybe tomolo will do it
*
my BE also.. when full load core temp shows less than 40c open case, 46c close case.. the CPU temp as a whole is 60c+ open case, 70c close case..
so what the 60c to 70c showing is right or not? coz when open case full load i feel warm only when touch the heatsink .. like 40c shows by the core temp...

another question.. is it ok for the processor to do 1.96vcore? on air?
hengmy
post Feb 1 2008, 01:54 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(digswell @ Feb 1 2008, 01:51 AM)
1.96 should be very high...i only use 1.375  1.45 to oc at 3.2g
*
scare will burn also... lolx~ i also use 1.425 to do 3.2ghz.. i want to use 1.65 to .17 to do 3.6ghz, but my mobo stuck at 1.55v and straight jump to 1.96v rclxub.gif
hengmy
post Feb 1 2008, 11:21 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(-pWs- @ Feb 1 2008, 02:00 AM)
hmm.gif  hmm.gif What board support until so high Vcore??

-pWs-
*
my board is biostar tforce 6100 am2.. when increase from 1.55 to 1.7v it will drop to 1.55v.. when choose 1.75 it will increase to 1.96v rclxub.gif
hengmy
post Feb 2 2008, 12:11 AM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(byfc2010 @ Feb 1 2008, 09:38 PM)
ally spotted...
wads ur specs n how high can u OC...
interested to noe...
*
halo.. haha.. so hard to find tforce 6100 am2 user nowadays... i oc my 5000+ be to 3.2 for 24/7 only.. can do until 3.5ghz with the software but cant stable.. how about yours?
hengmy
post Feb 2 2008, 02:04 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
after u set jumper to 2.2v still 2.03v... i think should be 2.1xv.. but i nv try coz dont have active cooling for ram.. mayb will try in aircon room next time..
hengmy
post Feb 3 2008, 04:33 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(byfc2010 @ Feb 3 2008, 04:28 PM)
one of my plan dude...
maybe we'll be ally again... tongue.gif
*
going to get a am2+ mobo too coz got pcie 2.0.. but not srue which one to get now..
hengmy
post Feb 3 2008, 05:18 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
QUOTE(digswell @ Feb 3 2008, 04:49 PM)
Blur blur blur haaa rclxub.gif Wat choice mobo chipset u wat to ???
*
might get ta770 since it full size atx.. but looking for a crossfire board also... gigabye 770 board good in oc?
hengmy
post Feb 5 2008, 12:16 PM

Regular
******
Senior Member
1,991 posts

Joined: Jan 2007
From: Seri Kembangan
hi all pros here.. what is the difference between 8pin and 4pin +12v for cpu? 8 pin will provide more power? more stable?
« Next Oldest · Overclockers United · Next Newest »
 

2 Pages  1 2 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0419sec    0.74    7 queries    GZIP Disabled
Time is now: 2nd December 2025 - 07:45 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.