Seem like option left is to get better psu Wif limited budget, might need to wait a lil before can get better psu to replace my current psu Thanks guys for the info

---

Added on February 12, 2008, 12:49 pmDin try that before, current is 533 divider I'll give that a try Will update later..

This post has been edited by za_az: Feb 12 2008, 12:49 PM

mind providin d cpu-z ss? i think we have chips w same capability, 2.5GHz around 1.3xV.

no harm upgradin to better psu if budget allowed, get those w single fat rail (+12v) which are gud for less components + moderate oc rig.

This post has been edited by ah_khoo: Feb 12 2008, 12:54 PM

SS provided HERE .. Mine is 2.5 at ~1.375v.. Yeah maybe same chip Any suggestion of psu that suit me best?

Anyway tried ram divider at 400 oso get same result Maybe reached it limit wif current psu

This post has been edited by za_az: Feb 12 2008, 01:03 PM

any psu w >30A @ +12v will do, but still depend on ya budget tbh & how many components u have. could plan to get bigger wattage if there'll be future upgrades (quad core comin).

Baru dapat rasa F2 is very hard to oc

Dont just pump vcore or vdimm only ..pump a lil bit the n/b volt
and HT adjust the HT to 5x (1G)
my TA770 will fail any test if i adjust down the HT to 4x or 3x ..so still using HT 5x to oc over 3g

This post has been edited by digswell: Feb 12 2008, 01:22 PM

Future upgrade might be upgrading whole set instead Dunno which psu yet, Acbel, Silverstone, Odin..

Yeah very2 hard to oc And hardware no good some more HT oledi lower to 4x.. Dun think can boot at 5x
Vcore and Vdimm both pumped, n/b one oni not yet Maybe will try that later...

If u wan to buy a new PSU
Here is the wedsite can Calculator Hw much power u nid it ---->Link here

I calculated for him already... Around 330w < true/pure power...

Thanks guys Meaning ~450w of true power is enough oledi

yup...my acbel 450W enough for my siggy already...plus oc for gc n proc

Buy Silverstone 400w PSU .. RM 1xx only..

Urs is intelligent or E2 one?

Yeap. that is in consideration oso

intelligent

bro, i think that apply to ya chipset which meant for am2+ platform, for am2 chipset, better stick to HTT <=1000.

@ za_az

remember to check d amperage ratin of +12V rail b4 "sapu" any psu.

This post has been edited by ah_khoo: Feb 12 2008, 02:24 PM

I guess his 1 is not E2 coz E2 is 390, 470 & 510...

---

Added on February 12, 2008, 2:29 pm

Special Features:

Efficiency over 80% across all loading conditions (20% to 100%)
Dual +12V rails for advanced systems
Dual PCI-E connectors (Multi-GPU ready)
Industry-leading silent running 120mm fan
Support for ATX 12V 2.2
Active PFC

combined+3.3 , +5V 130W
combined +12V 30A/336W

Input Voltage 90V ~ 264V (Auto Range)
Input Frequency Range 47Hz ~ 63Hz
PFC Active PFC (PF>0.95 at full load)
Efficiency Typical >80%
MTBF 100,000 hours at 25°C, full load
Operating temperature 0 ~ 50°C
Protection Over current protection, Over voltage protection, Short circuit, No load operation

Connectors 1 x 24 pin motherboard connector (550mm)
1 x 4-pin ATX12V connector (550mm)
1 x 6-pin PCI-E (550mm)

2 x triple SATA power connectors
(500mm + 250mm + 250mm)
6 x 4-pin IDE power connector (500mm + 250mm + 150mm)
2 x 4-pin floppy power connector
(500mm + 250mm + 150mm +150mm)

Color black (lead-free paint)
Cooling System 1x 120mm fan
Noise Level 20 dBA minimum ~ 29dBA maximum
Weight 2.5 kg
Dimension 150 mm (W) x 86 mm (H) x 140 mm (D)


Ok ah?

This post has been edited by Amedion: Feb 12 2008, 02:30 PM

Thanks for the info , dunno there's amperage ratin need to be check before Will remember on my next purchase

Thanks bro for the info

No need buy new PSU lar.. Sell off ur 3800 and buy 4000 brisbane.. Can run 2.7Ghz stock vcore.. No need pump.. LOL

Haha, either way is oso good

at last,manage to grab a x2 5000+ BE for my amd rig

doing sum burn-in rite now..will post sum screenies later

my 3600+ can also get 2.7 with stock vcore too.

http://forum.lowyat.net/index.php?act=Atta...=post&id=395936

kalakatu selling his x2 3600+ brisbane in garage sales too. maybe u can have a look.

---

Added on February 12, 2008, 5:23 pmadded : not to mention im using the same psu as u now. =D

This post has been edited by awh85: Feb 12 2008, 05:23 PM