300fps?? well, that is more than needed coz the fps show will be not show more than your LCD refresh rate..

so anybody can give me some tips of MMG's setup?
I'm loosing too much speed on the straights due to the car bottoming out

You have to raise the ride height significantly on some tracks and use packers as much as possible if increasing height is not enough. Springs must be stiffened as well.

Thats an awesome jump kimi....it took me some getting use to, i mean the new stuff haha.

Linkin...i second wut pccrazy said. Im gonna test ur setup in a minute.

PC...go ahead mate...i gotta get something done first.

EDIT...bro linkin...which version of sepang are u using?

This post has been edited by maranello55: Mar 27 2008, 12:05 AM

may i know what resolution ure running?

GP4 by TTTT

Ive stiffen up all the springs and increased the ride height. Motec shows its still too low especially reaching top speed. Reducing the rear wings will help to reduce the car from being pressed down. And note the front bottomed out during braking...I think can still just increase a tad the ride height and reduced the front brake bias.

Or just put a tad packers front and back instead increasing ride height. Like PCcrazy said. But dont listen to him too much....hes crazy




Attached File(s)
 mmg_20072.zip ( 1.29k ) Number of downloads: 4

lol
thanx dude

uh forgot to mention 1440x900 (19" wide), AA at 4, DX9
im curious even at default setting in bios not oced, prime95 failed the blend test almost instantly! im suspecting smething with the mushkin valueram im using but dunno yet

eh kimi. Ur sig is too long la. It screws the forum when you view it in 1024*768. Didn't notice it last night as my monitor at home uses a bigger reso. Can you shorten it?

try taking out any one of the ram at a time and test again.

linkindoode...no prob la.

---

Added on March 27, 2008, 10:13 am** LEAGUE ANNOUNCEMENT**

DRIVER ADD-ONS

To mars and those who have just re-installed rfactor, please proceed to our download section to get ir1Z, camel90 and hisham79's skins. The password is the same as the dedicated server password. This is to avoid any complication on the race day.

Skin patches and driver add-ons.

Thank you.

---

Added on March 27, 2008, 10:18 ammars, Penzman have confirmed with me that he is not racing for the rest of the season so his car is available. However, Karom has not come back to be to confirm so his car is not available.

The car that is available to you now is Penzman car and the MU car.

This post has been edited by maranello55: Mar 27 2008, 10:18 AM

i seem to get the same thing while using mine kimi. But didnt know it was that problem until i change my ram to HP RAM's a few days back. now all testing very stable indeed.

Mara and pitt, FSR have the physics finalized and I have superimposed it over MMG server1.0 and it works flawlessly. It seems that I really really like this physics and I hope you guys too. Because right now there is nothing more on my mind rather than to finalize on one mod.

1) This physics is modded by FSR, So we can use it as direct comparison to their lap times at given track which I also currently hv in my possession.

2) MMG has the best car models out there and it adds a lot to the immersion. Some argue that graphics is not important. To me, the best sim is the best all rounder. It has realistic graphics, realistic physics, realistic attributes, realistic details, etc. Sorry guys I'm a bit picky at this. We can argue and I'm open for debates but it must be constructive.

linkin, mara is crazier. He is the motec mad scientist. You can't get crazier than that.

---

Added on March 27, 2008, 12:42 pmHmm. That is strange. Kimi last resort is to try update the BIOS and memtest the ram in DOS environment. (upon bootup to windows) If still fails I think something is faulty and you should have it replaced.

This post has been edited by PCcrazy: Mar 27 2008, 12:42 PM


Attached File(s)
 physics.zip ( 22.37k ) Number of downloads: 7

tested the physics..i think its good but front left tire seems to over heat too much at sepang..my tires reached 135 degrees after second sector

This post has been edited by dzariq: Mar 27 2008, 02:50 PM

ok not to further OT spam this thread
http://forum.malaysiansimracers.com/viewtopic.php?t=495
anyone got time can help me out - me noobie with intel proc lol

[i resized signature smaller oredi]

This post has been edited by kimi: Mar 27 2008, 02:55 PM

Give me the setup and I'll look into it. Anyway compared to MMG physics this is to me a perfected MMG derived physics. Give it sometimes, the pros at FSR is the one who developed this. They arrive at this conclusion after months of testing so we cant simply ignore it after few tests session.

I'll look at tires files, maybe I misplaced some texts. Will reply to the thread in a short while.

This post has been edited by PCcrazy: Mar 27 2008, 03:29 PM

yeah the same thing happen to my tyres too. I have too much overheating and then loss of grip on the left after 5 laps

must be something wrong..the tires can not be that bad..

This post has been edited by dzariq: Mar 27 2008, 03:59 PM


Attached File(s)
 mmgse_2_fsr.svm.txt ( 3.66k ) Number of downloads: 9

I never got that hot tires on any circuit so far with MMG F1.

its the new physics we talking about..