Outline ·
[ Standard ] ·
Linear+
LYN Gen2 Club V2
|
shazmn
|
 Apr 3 2009, 09:13 AM
|
|
the lsd is fitted within the gearbox whether it is custom made or factory fitted... for example, before this i've been using a standard campro gearbox with a custome made lsd for better launching during drag scene...but since the ratio is longer n i need shorter ratios i've switched to mivec gb with lsd prefitted... theres no problem for a proton to use lsd...
Added on April 3, 2009, 9:20 amQUOTE(seanlimys @ Apr 2 2009, 05:43 PM) guess thats old campros torque which drops...is it? btw...any product to recommend for power and better fuel consumption? new bout cars here... based on his mod, the torque dips shouldnt be that obvious... senzaki89 - noticed someone in G2C posted this problem oso...is that u? if it is u shud already manage to tackle the problem already right? This post has been edited by shazmn: Apr 3 2009, 09:20 AM |
|
|
|
|
|
kulaan
|
Apr 3 2009, 10:55 AM
|
Getting Started
|
QUOTE(shazmn @ Apr 2 2009, 08:01 AM) lsd = limited slip differential... basically if u launch at high rpm, both tyres will be locked so it reduced the tyre slip...normally the gb will pull only 1 side of the tyre not both... actually this is suitable for drag purposes but normal daily driving oso can considering it comes bulk with the gear lever, clutch pedal etc... anyway if u want a longer ratios, i've got one gb a gsr 1.8 gb ahahah how much GSR 1.8 gb? |
|
|
|
|
|
shazmn
|
Apr 3 2009, 12:09 PM
|
|
|
how much u want? 2k can?  can nego |
|
|
|
|
|
seanlimys
|
Apr 3 2009, 12:24 PM
|
|
|
is there any alternatives? will zaptor alone or the fuel pressure thgy help? ad chged extractor to 4-2-1...duno from where..but i still thinking of other ways..please help  |
|
|
|
|
|
senzaki89
|
Apr 3 2009, 07:21 PM
|
Getting Started
|
QUOTE(shazmn @ Apr 3 2009, 09:13 AM) the lsd is fitted within the gearbox whether it is custom made or factory fitted... for example, before this i've been using a standard campro gearbox with a custome made lsd for better launching during drag scene...but since the ratio is longer n i need shorter ratios i've switched to mivec gb with lsd prefitted... theres no problem for a proton to use lsd...
Added on April 3, 2009, 9:20 ambased on his mod, the torque dips shouldnt be that obvious... senzaki89 - noticed someone in G2C posted this problem oso...is that u? if it is u shud already manage to tackle the problem already right? what is g2c? i dont think that guy is me.. what is the problem actually? i suspect is the fuel injector, cz the fuel like not entering the engine.. |
|
|
|
|
|
shazmn
|
Apr 4 2009, 03:37 AM
|
|
|
norseman - yup wrc did a very nice job fitting the angel eye n the quality of their item is better compared to others...
u add the audi style to ur current ccfl n ur headlights look horrible...SEMAK is the word haha...
senzaki - g2c is gen2club...anyway one of the members posted the same problem as u n someone mention it is the TPS...send ur car to SC n check...anyway i would recommend check ur throttle body first afraid it is dirty n try to clean it up...how old is ur car?
|
|
|
|
|
|
senzaki89
|
Apr 4 2009, 04:22 AM
|
Getting Started
|
what is tps? erm.. my car is 5 years old.. sc means send to proton edar? i hav bad experience with them.. charge me rm90 for just checking my door lock without fixing it and ask me to go find other workshop.. while,ah beng workshop check it for me foc..
Added on April 4, 2009, 4:36 amhttp://forum.lowyat.net/topic/728246 <<< i found this topic.. can it help to cope my car's problem? btw, i don't understand this part 1) timing set to 12° BTDC (variable range is 8° - 18°) you can set to proper value after adjustment depending on the fuel U use
2) make sure TB Servo is working properly (hot start engine should rev above 1000RPM then drop below that after a couple of seconds)thx in advance  This post has been edited by senzaki89: Apr 4 2009, 04:36 AM |
|
|
|
|
|
shazmn
|
Apr 4 2009, 08:04 AM
|
|
|
have to remember CAMPRO is a dofferent engine compared to mitsus...
where are u from? i could help recommend a place for u to check ur car
|
|
|
|
|
|
ah liew
|
Apr 4 2009, 01:11 PM
|
|
|
noob here, is GEN2's spring + absorber same as Satria Neo?
Thanks.
|
|
|
|
|
|
senzaki89
|
Apr 4 2009, 11:57 PM
|
Getting Started
|
owh.. i tot it was for campro..
currently now i in ipoh..
|
|
|
|
|
|
pokgaizai
|
Apr 6 2009, 12:26 AM
|
|
|
huhu~ did FPR at Shazmn today. Looking for another small mod next...  |
|
|
|
|
|
senzaki89
|
Apr 6 2009, 01:53 AM
|
Getting Started
|
@pokaizai how is ur car performance after u installed FPR? plan to do that too..  |
|
|
|
|
|
pokgaizai
|
Apr 6 2009, 10:05 AM
|
|
|
Car more responsive d ~
|
|
|
|
|
|
jVIPERs2
|
Apr 7 2009, 12:13 PM
|
|
|
Hello guyz..got a question: I noticed this at my brake fluid container: 
I was told it's supposed to be like this (taken frm toyota car): 
Should I get it checked at COE?? And also, I can't get my warranty claim if I don't get a letter frm my dealer saying that the parts have defect when I took the car. But my dealer is now very reluctant to produce that letter, so COE says cannot claim warranty. Anyone can help pls?  Oh also, I juz transferred VS frm my mum's car to my Gen2.. I'm worried about warranty issues, will it void warranty??  Thanx for your time guyz..  |
|
|
|
|
|
kethon27
|
Apr 8 2009, 01:16 AM
|
Getting Started
|
Hi... Just curious here... I want to know is anyone driving Gen2 CPS Auto & Manual version? I believe you guys had talked about this topic already but 116pages really took alot of times to find out.. tried used the search tool search for "FC" which normally ppl type that instead "Fuel Consumption" but LYN said too short and not allowed to search.. If you guys dun mind pls provide the info again..appreciate that!!
Maybe perhaps TS can pint-point of the info as link at 1st page 1st post..
Thanks..
|
|
|
|
|
|
ahlong
|
Apr 8 2009, 10:47 AM
|
|
|
kethon27u may try the official Gen2 CPS thread here GEN2 CPS THREAD
|
|
|
|
|
|
kethon27
|
Apr 8 2009, 11:42 AM
|
Getting Started
|
actually i did ask the similiar question there...ok la..thanks for the hint...
|
|
|
|
|
|
BridgestoneRE711
|
Apr 9 2009, 09:04 PM
|
|
|
i still remember i saw gen2 with cd changer in showroom before .
anyone know how much does it cost ?
|
|
|
|
|
|
senzaki89
|
Apr 9 2009, 09:47 PM
|
Getting Started
|
QUOTE(senzaki89 @ Apr 2 2009, 01:50 AM) hi sifus.. recently my car got problem.. sometime, whn i step the acceleration pedal.. the engine seems laggish.. cz the muffler sounds like *kentut*.. ermm.. like machine gun fire.. the car is moving,bt vry vry vry slow with the machine gun fire sound.. whn i let the pedal off, and step on it again, it accelerate like normally it does.. what is the problem? isit the fuel injector? spec of my gen2- 1)custom 4-2-1 extrator 2)k&n air filter 3)fgk muffler 4)endless engine oil 5)r3 sticker problem solved.. jz changed the spark plug to denso's one.. er.. can ask wat is the price for gen2 r3 bodykit? i surveyed and found out it is around rm1k++.. bt my fren can get it for rm700+paint.. need advise~ |
|
|
|
|
Quote
0.0307sec
0.46
6 queries
GZIP Disabled