Bro, are we talking on the same m/b here, coz mine only with option we talked about as below,

Multiplier(NPT Fid control): Only got options of 4 to 8 and auto

Memory clock value: Only DDR 400/533/667/800 and auto

Under HT Link control, HT Link frequency only 200/400/600/800/1000 and auto

Good info. But personally I think solid capacitor is better for longevity = jangka hayat..

sure it's expensive buying mainboard with all or some solid capacitors soldered...

So in order to get 3Ghz, pls correct me on the below:

CPU voltage=+0.05V
CPU clock=300Mhz
NPT Fid control=Auto
NPT Vid control=Auto
Memory clock value=DDR400

HT Link Control
->HT link width=auto
->HT link frequency=800Mhz

Dram configuration->memory timing
->CAS latency CL=5
->2T Mode=Enable

If we add the HT multiplier do we need to increase some HT voltage?

No good to me, no boot, if boot also running in safe mode, btw what version of bios you're using?

I'll be getting an X2 next week... huhu. Waiting for my bro to post it to me.

screen shot mean cpuz after u can boot
@DB wanna try LE proc after tis??

huhuhu,no one wanna help me   

wondering too.. if tat LE better, time to change.. summore its quite cheap.. i think wanna try r..
i think it is because of the L2.. so fast although its just single core

why not u give a try to oc single core only on 3800+ can catch up head to head or not.. fully tweak the small timing too... mybe it can help

4400+ G2
besides, i need dual core since i do a lot of photo/video editing nowadays 

Right guys, finally managed to do 3Ghz, obviously ram setting is very important here. Still alot of fine tuning to do thou. Thanks dblooi, xixo_12!!

Oxburg is using that board

And also a small review by syazwareno here: http://forum.lowyat.net/index.php?showtopic=589074

wow... seems like the bios is packed with OC features with reasonable voltage.. and best of all, intergrated memtest !!!

anyone can help me.. My 3800 f3 only can push to 2.6Ghz.     
This is what I do
fsb : 260
vcore : 1.20V
ram : 667Mhz but I set it to 533, so my ram divider now is 8
vdram : 1.90V
timing : change from 5-5-5-18 to 4-4-4-12 2T
HTT : set to 4x

After that I cannot push fsb higher than 264 though I set vcore higher than 1.20V. My computer fail to boot.
For information, I use asus m2n-e,acbel 350W psu, and kingston value ram. Maybe one of them give me limit to overclock my procc 

533 is only what i set in bios to get divider 8. Currently I'm use kingston 667Mhz value ram. So 667/2=333.5. And now 2600/8=325. This mean ram frequency now almost same with origin frequency (333.5 >=325) and i already not oc my ram. this right or i misunderstand about that?

ooo...i see that. Agree,since it value ram worry to oc it.. If i set ram to 400, how about timing? still use 5-5-5-18 2T?

It heavily depends on chipset. Some kingstons come with good chips (Hynix FP-Y5 was not too hard to find at one time, and I've seen pics of some with even D9GMH and D9GKX-for those chipsets DDR1000 is not difficult, and if you're lucky AND skilled DDR1200 is possible). But nowadays they've remarked the chips, so you can't tell any more.

ss will upload later coz only online at ofis  . Glad to hear value ram can push till 765Mhz. Just to ask, how about 350W psu? enough to push my procc to highest oc result?

On last check they were out of stock.
And they will try to push you the Asus M3A no matter how you tell them you want the TA770+.

@-pws-,
May i know why the 770+ interest you?
Are you looking at it for higher OC or do you want the AM2+ support?

I think dblooi is the suitable one to answer you this Q.

-pWs-

There's a new Bios revision for the TA770 A2+, but not sure how well will it perform yet. Have been having difficulties finding proper reviews on this mobo yet.
So Biostar had finally breakthrough the 2.2v vdimm limit, that is interesting. I actually gave up on this mobo because i could not confirm whether the Vdimm is still limited at 2.2v. The HT part is really cool and tempting.

Go get urself one and show us what the 770 chipset can do...
I'm curious to see will it outperform the Nforce 590 in overclocking.

Btw, my F3 screenies whould be up somewhere around next week. Too bad my GeminII will only be arriving mid next week after 1-1, if not 1-1 will be the best day to pust the proc to the max and fully setup the thing as my rams and fan should arrive anytime tomorrow.

My advise I suggest you strongly get;
1. AMD X2 5000+ Black Edition at 365
2. Biostarr TA770
3. Dual DDR2 800

You can easily OC to 3.1 at stock voltage. 
You get better performance, low power consumption and less heat from 6000+

hey sorry bro... i am really noob here and dont think i will overclock my pc...

and i will be bringing this pc oversea so i dont wanna risk spoiling it ( since i am noob)....

i am aware of your suggestion above and would be buying item 2 and 3 on your list with a amd x2 6000...

i just want to know if the amd x2 6000 is good for noob like me.. and also what is the correct price for it??

thanks so much for your help!