DFI? Expensive. Cant afford. 

xixo forming triple A platform ka? 
(AMD proc, AMD chipset , AMD gc)

after some googling,
at last i found the bios dram configuration SS  of your mobo
bro -pws-, you would love to see this

[attachmentid=365114]

rig photos
[attachmentid=365115]
[attachmentid=365116]

hey wait...i think he plug his ram wrongly adi
if i'm not mistaken, to form dual channel on MSI mobo,
two sticks of ram need to plug in different colour dimm slots

[attachmentid=365117]

check his CPU-Z SS, really single channel only 
another typical case of didn't read manual b4 setup the rig
link: http://www.xtremesystems.org/forums/showthread.php?t=167447

Add me please, an update to previous result. I think this is the highest OC I can achieve with this proc without any errors.

5600+ X2 Windsor F3 | capriodimitri | M2N32 SLi Deluxe | Corsair XMS2 | 6400 | 5-5-5-15-23 | Xigmatek HDT S1283

[attachmentid=365107]
I wonder why quite a number of new records do not have SuperPi 32M or Orthos >1 hour? A few of them just post 1M SuperPi. Even if windows able to boot with such high speed, wont it be unwise to run at such unstable processor calculation?

because purpose of 1m is just to enter SPI 1m chalengge, for sure it's not stable clock.. if yes, sure 32m will be included, if u succes to run SPI 32m , it's not the proof that the system is stable enuf, conclusion is: it's just for benchmark

Using F3, I notice vcore require is much lower to achieve higher speed. But since I am new in OC here, how some people can achieve such high OC (with dry ice and etc) but aint using it for daily use? Is it just for benchmark? For me, I cant go higher than 3.22Ghz with this proc without error. Even I pumped muvh vcore but it is still the same. It can boot up at 3.3ghz but got error at Orthosing.

who want to use high speed but need to invest a lot of money to buy dry ice 

I think the main purpose of OC would be maximize our value of the proc esp for daily usage, right? Hope to hear opinion from you.

there is a lot of purpose:
1. fun
2. daily use
many ppl will choose fun.. the daily setting is put in the second choice... for example: DBLOOI using CnQ.. am i right DB??

Thanks, I agree what you are implying. Me not looking for debate la, still new    Just wanna ask a technical question, actually. Is it possible to OC so high and yet so stable for certain batch of proc? Example, mine is OC to 3.22, if I get another similar proc, will the result be same, or there is a possibility to OC to 3.4?

Why is it there is error, despite I have check all the following: vcore, vdimm, ram timing + speed, HT bus, temperature? Is it luck?

Hei dblooi... all AMD 1600-LE is F3 stepping right?

Even if so. What good does a single core do?

hi tictac ...
wow...i was about to say no it isn't
but then after did some searching..
result shows that it is F3 stepping 
[attachmentid=362549]
a tip to pick a good F3 proc
look at the proc , pick those with CCB8F 1
you will have 50% chance to get stock voltage hit 3G proc if you do so 

amd hard fan yang susah nak mati detected.. haha
seem like a lot of ram tweaking.. good enuf..
oc is luck + skill + money, it depending to each other

Yes, they are F3s...Played with one...
Well, some people with a budget setup might actually get a single core 3.4Ghz with the price of RM150.
Iirc, LE-1600 do not come with CCB8F. The one i got was CCBVF if not mistaken...

Just to share a little since i played with one.

LE-1600
Abit NF-M2S
Kingston DDR2 667 (set to 533 5-5-5-15 vdimm 1.9)

At stock vcore and vdimm 1.9, i managed to run 24hours stable at 2.9Ghz.
I could not get pass HTT 264x3, i have no idea why...once push FSB to 265 only, it boots into post, but i just would not continue loading from there.
Too bad the proc in hometown now, if not will test it with my AN9-32x when i collect it later today...

Anyway, i do have a strong feeling that it might be able to boot 3.3-3.5.

Btw, i'm running stock HSF and stock thermal paste and guess what, 34c on idle at 2.9Ghz and around 45c on load.

Now waiting for my:
AN9-32x
2x1GB D9GCT, then i will pm -pws- to add me to the list...

nice cpu there devil....
go futher lah... some friend say it can go 3400....

yeah i used to underclock my proc to 1GHz & 0.8vcore
use central brain identifier to check for watt usage, 11W only 
but now stop doing that adi due to unstability ..
trying to troubleshoot now,
suspect .net framework 2.0 didn't install properly:sweat:

i think it edi included in CD package rite..

i think it edi included in CD package rite..

yeah , but something just wrong if i use that one in CD.
downloaded a fresh version from microsoft webby,
so far so good....
but not sure issit that's the reason caused unstability
will try to stress the rig tonite 

nice cpu there devil....
go futher lah... some friend say it can go 3400....

dont stress it, it need only 2 paracetamol...

haha ic
bro xixo stop trying super pi adi? 
btw, still using single stick of 10th nowadays?
don't plan to get another one?

At last manage to use 5x HT Multi already @ 3200Mhz 



-pWs-

At last manage to use 5x HT Multi already @ 3200Mhz 



-pWs-

working la bro, no time.. next sem i do it.. will curi another 10th from sumone .. for daily use just using one stick je la.. lg pown main game n make some work.. so i think no need la..

At last manage to use 5x HT Multi already @ 3200Mhz 



-pWs-

well, CCBVF is older batch of F3
if LE-1600 available in CCBVF,
i don't think it is impossible for it to come in CCB8F batch

Ya, the possibility is there, but wondering if AMD will ever sell that many of those LE 1600s.
Those LEs that i've seen, guess what only CCBVF. I would really like to try out a CCB8F if there is any...

At last manage to use 5x HT Multi already @ 3200Mhz 



-pWs-