Waooooooo, that's nice... But you're on Xeon E3110

Okay, I tried downloading Rivatuner and played some games while monitoring it, and I find out my fan speed seems to be stuck at 81%, no matter the load.

I can manually set the fan speed in Rivatuner, but if I use auto, it automatically runs at 81%

Is this a problem? The fan's pretty noisy at a constant 81% speed.

okie, will try enable overdrive and see whether the 2nd card will appear...

err, 14k+ in 3dmark06 for CF is normal i guess cos i'm getting 14k as well...
the problem is due to the proc try OC it abit u will see better results...

gimme your card,come take this gecube n rm 760....dammit...itchy hand edi to oc n cf....lol

Ok, weird problem here. Once i overclock my card, the CPU test 2 in 3d Mark06 will fail to load. All other tests can be rendered smoothly without artifact, except for this one (can't even load). Anybody has solution to this?
Btw, my clock speed for both cards: 850/2400

Just got my GeCube 3870 XT3, will post some results later

alright, after OC my CPU to 3.4 the 3dmark06 increase from 14k to this 17873.

proc is OC, so time for ur GC to OC as well.........

btw u can try to up ur PCI-e speed to 110, it will boost ur score more

ok my initial test...hmmm somehow the gecube work only in system so i pair it up with saphire and the card can be detected....ok here is my initial result..

and this my final result with rough oc...

wahh already tested that sapphire can go 890/1300...try it...the result should be higher

This post has been edited by flatfinger: Apr 4 2008, 11:26 PM

enough ler...no need very high...that should be ok coz initially i just wanna hit 17k mark...it should be allright running in my 27 inch lcd monitor..

Can anyone pls help me with the above problem?
I am using Artic accelero S1 rev.2 for both cards btw.

This is the best I can do at the moment:


Trying to touch 12k score...

nice score silverfire. i cant even pass 862mhz 4 d core clock. 920mhz ...... wow... impressive eh

all discusing bout 3870..hehe..where those who are using 3850...cum2 make dis topic hot~~~~~

there's a bios that fixed ur card to go pass 862...u can read it back at the beginning of this thread...

i tried 2 flash d fixed bios using winflash but cannot ...... if i was not mistaken, it prompt 'id mismatch'....

if im not mistaken..u cannot use window program like winflash to flash it...u have to flash in DOS mode...

This post has been edited by flatfinger: Apr 8 2008, 04:41 PM

alamak DOS mode seems complicated eh... not dare 2 flash...