taobao stock lol.

Amazon got new toy coming soon.

dikae’s got ready stock for plateau protectors as well.

This post has been edited by INGfusion: Nov 23 2025, 12:16 AM

why u need so much of the plateau protector , are u changing it every month? I thought that area should be quick hard to reach and scratchable? 1pcs should be last quite long time.

hahaha no la, just want to try thinner and better cutout film.

owh , this is kind of like upgrade version compared to the previous one , okey now i understand why

I actually stock up 10 more plateau protectors for pro and PM, from the same seller but unfortunately the new batch QC dropped, now the adhesive is different and show bubbles, I just tried to install the new one yesterday, 8 pieces gone in one go lol, all the same bottom and top got bubble due to adhesive…tested on 2 different phones but same so it’s gotta be the protector QC, but I notice they improved on the cutout for 3 camera lenses, it’s smaller hole now so it fits the ring ngam ngam 99%, leaving almost no gap for dust trap…but the mic cutout could be improved coz it’s still abit big now, I’ve had 1 for 17 pro blue film with 3A prints, that’s the best imo, best cutout, small mic hole, lidar and flash also ngam ngam 99% no extra space…lookout for the 3A ones if you are going to min max the protector

This post has been edited by dikae: Nov 23 2025, 01:12 PM

im limiting to 80%, because its charge faster and i got charger everywhere

so i top up twice, one in morning, and by 5pm, and this routine i keep until i was travelling or outstation, where i would charge it back to 100%

would it help preserve my battery? im sure it wouldn’t be much different compared to to 100%, but charging anything to 80% is fast and i loved that.

old protector, hole cutout with extra space.



new replacement, hole cutout ngam ngam fit fit, but mic cut out bigger than the old protector.

This post has been edited by INGfusion: Nov 23 2025, 03:19 PM

install blueo ar sp to replace my hoda after 2 months (because i have 2 pcs blueo ar)
can see diff between non ar vs ar
i have install smart devil ar (also heat bending type) for i17 today, i would say smart devil applicator is easier to handle

the blueo one macam roll til bottom cannot over but smart devil one seems over (feel safer)
end up blueo has bubbles over the bottom edge but slight push then is fine

quality wise for blueo ar and smart devil ar i cant diff both the sp edge is very good maybe because of 3D

*first time apply this type sp with roller luckily both nicely applied

Hmm i don't like bigger cutout on mic coz when you take close up pics especially in mirrors, it reflect the hole quite obvious lol...

Also the adhesive is slipping into my ocd...I replaced 8 times and still the same so its not just dust under film anymore

will need to search for other brand that with smaller mic cutout.

damn that bubble i also ocd if mine got issue like this, try use hair dryer to heat up abit than push and hold it for like 30sec?

The clear one however is top notch, cutout 99% fit on all the holes including lidar and flash, mic cutout fits just nice..no bubble etc...only thing is not matte sigh

This is the clear one, from same seller...

yup, clear hole cutting are perfect and smaller compare to matte film.



branded plateau protector are slimmer and easy to remove compare to none branded film protector.

This post has been edited by INGfusion: Nov 23 2025, 05:16 PM

How much you pay for the branded ones? Can get from ninjaz?

Wonder if the branded ones have better adhesive glue on these films..

around RM5 per pcs, i still have 3x pro max and 1x pro, if you are urgent need it i can "kuasa" to you first.

Haha thanks but i still got a bunch left, just that i think this batch all have bubbles..if ocd can't tahan ill switch to clear ones first...

Btw, Apple’s second limited edition accessories…



This post has been edited by dikae: Nov 23 2025, 09:44 PM

Any link for the latest version plateau protectors ?

Best plateau for me is still from same seller if you are looking for 17 pro matte, or 17 PM clear…

I’m also looking for a good matte 17 PM protector with precise cutout on lenses and mic hole, with no bubble issue..

I get the socks… this is beyond me… how to even keep this object around?

lol, probably keep it in the socks as well

Yes, and I forgot to mention. I was on Wifi, I think the body of the iPhone 17 Pro Max got too hot, I can cook an omelette.