I think this was answer not statement. So what was the actual question?

Hi guys,

Need some help here- any recommendation on router that is:

1) goes well with Skyworth GN630V
2) provides reliable & stable internet connection without heating up or need to restart periodically
3) good range
4) future proof with min 800mbps

Thank you so much for your help!

I don't think D-Link and Skyworth are entertain such vulnerability as ISP buy cheap cheap.

I think just let it be vulnerable, typical ISP Router are like that tho

Thanks for the speedy reply.

Any good recommendation for Asus?

Thanks!

Thanks bro!

I agreed..

Also, it appear TM use "CTC " PON Standard, as their OLT never updated to provision Type 50 (2.5GbE), even ONU has 2.5GbE, it still report as 1GbE cause QoS, Traffic shaping in disarray


so, I think TM stay with GPON for little longer, and use those CTC Standard ONU just to hack 2Gbps compatibility with Type 47

so, Firmware become mess very mess.... as I have their SDK, has no code of conduct, some use Tab, some use Space, some { after or new line...

thing is, if send to AI to find vulnerability, it guess it will a lot, this is how hacker make money with ONR nowdays

I’m having problem watching YouTube live videos keep buffering, anyone with the same issue?

Should be revise in 2026.

yes but its old model AC68U so i will not buy new model upgrade ASUS no longer

yup2, same here, since rb2011 

now using hap ax3 as main router, rb2011 as switch and hap ax lite as mesh router 

personally, overall perfomance is good,

wifi perfomance also improve after several firmware update

if you want in-deep review, better check on youtube, many have already review it there 

To be honest, both are Vulnerable, since firmware being publish here, guy/team from my discord PON Hacking look and found attack vector, even can pivot from PPPoE to VLAN209 and VLAN400
They planning make 2G user as VPN Server for them

For serious business, they don't use AIO, for 2G plan they use my NIJIKA, for 1G, stay with old ONU which is much safer and dumb
SDK Source Code, Taurus Board that D-Link DPN-FX3060V (A1/B1)



What I know D-Link and Skyworth runs on ancient server



Another Taurus Board, Zyxel AOT5221ZY that runs on OpenWRT




Since both D-Link and Zyxel use same SoC, making D-Link use OpenWRT is my next project, by dissecting Zyxel indeed

As I have the SDK, I can convert TM Blob to TIME compatible ONU, or even Maxis own Infra

Yes, pretty much any ISP provided equipment, security patches not their priority as these equipment are cheap enough.

I have told them, but my friend said just leave it, want cheap internet, no security.

security cost money 😔

like D-Link 2.0.3 to 2.0.6, just improving on GPON performance, not security, vulnerability still exists according to them.

They didn't tell me how to do it, and I never wanted to know, knowing it I can be prosecuted 😭

old screenshot hack on action




This good learn, ISP CPE cloud is bad:
researcher accidentally finds O-day affecting his entire internet service provider


since I own both D-Link A1 and B1
I plan to make D-Link ONR using OpenWRT by using Zyxel as base since both use same Processor

also using ONR is never been good, ISP still have total control of that device,
Let say, DNS filtering happening again, they don't like use custom DNS, ISP can override even without TR069, just from OMCI can do that,

Maxis on TM fiber still ONU + Router layout
the ONU is 2.5G single port

now, TM need push OMCI on Both LAN 1 and 2 now 🤣🤣🤣
because that ONU only has one 2.5G

for this reason, TM cannot support Unifi + Maxis on same ONU

replay still a thing, even in bridge mode
better remove ONR for safe measures

Let say your 2G Maxis is up, you still can use old ONU that TM give for maxis customer for Unifi, just pay the technician to configure the maxis ONU and they will contact NOC and update proper OMCI because that ONU do not have telephone port, if you need Telephone, need pass VLAN400 to 0x101 (LAN1) instead of 0xe01 (VEIP)

Nah, most ISP not doing that,
best way use dumb ONU Bridge + Router with constant security update

also, if router security is your main concern, better just pick mikrotik

cause they long term firmware update

for example my rb2011



it from firmware version 3.10 which is 2008, still getting firmware update until now, most router only get 3 year official update and if you lucky and router flash custom firmware, can use openwrt to extend its lifetime

yup2 hEX Refresh is great, with arm cpu now can use docker directly on the router.

with that you can install adblocker like pi hole and adguard home directly into it 

Just PSA. HEX Refresh uses an arm32v5 CPU. If your intention is to use public container image, it is extremely limited, almost useless.
If running container on Mikrotik is the goal, get arm64.