just use windows paint >screw/resize it, wallah~!!

memtest86 stable does not meant for wat, you still have to prime it & doing superpi 32m. in my opinion, memtest is only for testing the ram is in good condition or not.

bro -pws-

Please update mine.

OC cant go higher due to 'sayurness' value ram. Even top up vcore to +0.050, i can up to 273 only. Soo better stick to 270mhz which is rock stable indeed.




This post has been edited by nadeng1987: Dec 2 2007, 02:20 AM

that's what i think... the best!

huh????
Im using Nforce4 chipset.......1800 is the highest achieved with no impact to stability at all.

Your details pls
No details no add

Yup.

-pWs-

AMD X2 4000+ brisbane G1 | nadeng1987 | Biostar TA690G | Kingston Value Ram PC5300 1Gb | Xigmatek S963

so what my main prob??still because ram@mymultiplier???

Try others Ram Divider.
And play with tRFC and MAL

-pWs-

ok2..BTW what tRFC and MAL???

Those are ram timings.
tRFC = Refresh Cycle Time
MAL = Max Asynchronous Latency

Loosen those 2 options and try again.

If you dun mind, post up the Memset screenie here.

-pWs-

Woot,where all the F3 user go???? There shud be a lot of SS by now.

Aim stable clock... prime pagi till malam... prime till TNB bill high high @@"

PWM temp has got very little to do with the motherboard chipset. It depends on what cooling is used on the PWM, and how much power the processor is using. Usually overheating PSM is due to poor thermal contact between the heatsink and the MOSFETS (dunno why board makers like to use themal pads aka 'bubblegum' which has pathetic themal conductivity). For boards not using heatsinks on the PWM, its almost always because the airflow from the processor HSF is blocked from reaching the PWM (usually due to a whole row of capacitors), also applies to heatsinked PWM, but not so serious.

All busy kua..I also din get chance to crack open my AM2 rig to play with mine yet..got a lot of stuff to test to put up for sale..pokai like hell after buying the F3 and Annys..

HaHA..try OCing Pentium D 800 series...that one TNB meter jalan like car on dyno...

haha...mine not arrived yet...dblooi will post on monday..
new f3 users are all busy u know..refunding after buying f3 and ballistix..oopss
but then still need to buy thermal paste...here they dont sell lah...waa

---

Added on December 2, 2007, 9:21 amTHE HEIR OF BRISBANE G1 DETECTED!!!!!

This post has been edited by alive88: Dec 2 2007, 09:21 AM

like dblooi promise, all sure have 3.1ghz @ stock vcore~

but do u try stock vcore @ ddr 400(no limit by ram) can hit how much~

Sure have some F3 can get 3.2 or higher.....

Might u all try tonight ~ see who get king of the gem

* i try it later~

@dblooi

later around 12pm u at home??

i go u there give back ur umbrella ok

off topic...

you wan get ram for your brother? I got 1 bh6 & 1 bh5 for sale

1.25? check it back, try to push more from that speed, sure it can push ..

my brother don need so geng ram la~~

js pair VR ok le~

or u wanna sell me at VR price ...

my price just a bit higher than VR only...