no lar
y they 1 2 stop u?
not illegal wut...(afaik)
even if they stop u, its just a vac gauge kan
can get i think 1, 2 or 3 meters in 1 pillar

erm.. i thought copper plug better than platinum?? correct me if im wrong..
platinum wan not so sharp
iridium wan damn fine needle like..

Yea...NGK one...Not good???

Ermmm...sharp tip??

-pWs-

err...i meant...what does HPPC mean?
wats the full words?
can PM me ur best price for the autolite?
den easy nextime if 1 2 buy can contact u

thanks

ngk is the OEM for proton n perodua in plugs.. ok wat..
sharp tip is very fine tip.. good for firing!

platinum can last longer than copper... better firing as well... but recently i heard that it can overheat quickily as well... thats why i'm gonna try out side-gapped copper plugs... see if its any better than platinum plugs....

denso platinum plugs...



This post has been edited by the_catacombs: Oct 26 2007, 02:50 PM

in this forum many mod kaki man.
later our car 1.3 become 1.4
1.5 become 1.6.
ahaha

1.3 become 1.4 abit hard la... coz vr hard to source for the right piston bore...

but 1.5 become 1.6 got people do adi lar....

how much are the denso platinums?

what kind of spark plug suit hppc cable?

dunno... but i bought my NGK G-power platinum plugs for rm48....

---

Added on October 26, 2007, 2:56 pmhppc cable is high performance cable plugs ar??... they dont serve much difference la.... standard cable lagi best....
if u want good, use iridium lo... not cheap though...

This post has been edited by the_catacombs: Oct 26 2007, 02:56 PM

goodafternoon all




Occassion: Proton Iswara / Saga Official Teh Tarik Session II
Date: 3rd November 2007
Time: 4p.m.
Venue: Bukit Antarabangsa
Meeting Point: SHELL WANGSA MAJU (NEXT TO CARREFOUR..used to be projet)

Confirmed List:
1)Andy
2)CerealKiller
3)flyingteeku
4)cheeann
5)-PwS-
6)Wong815
7)wkho555
8)Gilbert
9)yohomies
10)sonic_darkknight
11)

Pending Confirmation List:
1)
2)
3)

ANY ONE I MISS OUT PLS PM ME OR UP DATE THIS LIST THANK

T3 hv overcharge mou. so quite......

Is time to put in B13 side mirror. Hehe. I will help you look after that motor.. Give me ur number pls. I got, I will contact you. Those mat rempit I don't give a damn on them. last time my friend around 3am at bulatan pahang, kena round up by a group of mat rempit. So he contact me and request for help.. Then I called up all my callmen friend to come help.. My friend arrived at that place and chase those mat rempit with tow car and around 10 cars chasing them too... when those mat rempit see a bunch of people coming down from car holding parang, their di*k kecut like hell.. Luckily my friend not using 3 tow car to block their way. Else, the next day will be the hot new on newspaper.. At last, my friend managed find 2 mat rempit on that incident to lepas their itchy hand... I was on that incident as well...

i wonder wheter we can report to police.. since u got the reg number. Of cos dun expect much... juz wanna make life diff for that arsehole when he wanna renew his insurance or roadtax lol

b13 mirror? how it look?
those mat rempit like that 1. see ppl car nice no syok then go hack ppl mirror. news 2day a persona kena. if the owner is garang ppl he finish liao. take car go bang him.

u call me oso no use...
that mat rempit damned lucky wan
nexweek i going swak for work d
wont b back for quite some time
sighz...wish my car had a .38
then could have nicely made a few holes in his bike

---

Added on October 26, 2007, 3:39 pmi tot of reporting oso...but i dont think police will care lar for sumthing like this

This post has been edited by neosaint99: Oct 26 2007, 03:39 PM

no use 1. later talk more sendiri pergi lockap more sui.

hello.. i'm new to this thread. i got a 1996 proton iswara. Yesterday, got someone accidentaly crash into my car, bumber and left headlights spolit. Can anyone tell me how much it will cost me to get it fixed? Got to do some survey before sending to workshop. Want to prevent being slaughtered ma. And do you guys having problem with your water tank? mine have to be refilled almost daily Help is much appreciated.

This post has been edited by ws-: Oct 26 2007, 03:46 PM

Today go back SC to changed the actuator which control the engine idling.. So I was waiting for my turn since his mech all busying servicing other car.. So I go and chat with the boss itself.. Haha.. Chat until song jor, then the boss said, let him fix my car la.. Haha.. So I see he fixing my car.. After changed, then slowly he help me tune back my car. My car idling now very nice. And I think I dun understand. After he tuned my car, now my car engine getting quiet compare with last time. Now I can hear my muffler bassy sound compare last time.. Wonder what he do.. So while he was busying tuning my car, I go jalan jalan to see those new car waiting for the SC to inspect.. It have several LMST there.. Wah seh.. Luckily we get our car early.. Else, sport muffler pun tak da.. New de LMST using kancil size muffler liao.. And using Good Year decaro GA tire. Luckily it still 14inch.. I believe later on, proton will cut more stuff in LMST.. Hehe.. And the extractor I see is, short de.. not like us using Wise exhaust setting.. And one more thing, all the LMST gear stick I see at the SC, all very long de.. Longer that our gear stick. Dunno why.. So ugly when it longer that the gear cover..