Outline ·
[ Standard ] ·
Linear+
Automatic Gate, How much do you need to install one ?
|
weikee
|
 May 8 2012, 10:16 AM
|
|
QUOTE(len9zai @ May 7 2012, 10:46 PM) You couldn't compare yourself with the theft, I mean that's your autogate, I'm sure that you wont use 100% of your strengh to force pushing it, but the theft will use their 200% of energy to make sure your gate are destroyed to let them get in easily...  for professional house breaker, they got all the tools to get in your house! nowdays, bosch and makita are selling their proud products, using only battery powered tools, and they will cut off all of your padlock easily....dont have to find any socket outlet~  I use my full strength, because I want to check the mount on the wall. it sure are stronger than submerged system. For house with balcony power, trip the mcb, and on it only when you need to use. This post has been edited by weikee: May 8 2012, 10:25 AM |
|
|
|
|
|
weikee
|
Jun 5 2012, 06:46 PM
|
|
|
What is yoru 1k++?
1001? 1100? 1500? or 1999.
expect to be minimal 1.5 to 2k inclusive of wiring..
Without hacking a basic wiring maybe already 300 to 500. A reasonable autogate is about 1.0 to 1.3k..
|
|
|
|
|
|
weikee
|
Jun 5 2012, 09:31 PM
|
|
|
QUOTE(soonys @ Jun 5 2012, 08:58 PM) if ur ppl want to install wiring in conceal i suggest u ppl better take a underground cable it can more save for u if long term......for sliding u can use g-force ,celmar ,or mag for malaysia brand dea ,faac ,came for italy brand
Added on June 5, 2012, 9:00 pmif u say wiring without hacking rm300 to rm500 u should know wat mm the wiring is
Added on June 5, 2012, 9:01 pmim a installer n consultant also at kl,sel area Maybe you can quote the requester. I am not the one required. Wiring can be very expensive too. A nicely done gi expose wired can be costly but really solid and nice. |
|
|
|
|
|
weikee
|
Jun 14 2012, 12:59 PM
|
|
|
QUOTE(Mohd Jais @ Jun 14 2012, 12:53 PM) Can i use CAT 5 Network Cable for the 7-Core cable? 3-Core Power Cable enough? Yes if you want to have nightmare. |
|
|
|
|
|
weikee
|
Jun 16 2012, 09:45 PM
|
|
|
QUOTE(skng03 @ Jun 16 2012, 04:10 PM) normally from main DB to auto gate button switch (inside your house) - 3c x 2.5mm2 in conduit, from gate control switch to out door auto gate control panel - Armoured Cable CU/XLPE/SWA PVC min 7c x 2.5mm2, allow 11c x 2.5mm if want to add gate lights & door bell from control panel to motor - CU/XLPE/SWA PVC 2c x 2.5mm2 A 7 core armored cable will do for auto gate. 1.5mm2 is sufficient unless the motor is high current. |
|
|
|
|
|
weikee
|
Jun 18 2012, 09:45 PM
|
|
|
QUOTE(Mohd Jais @ Jun 18 2012, 09:39 PM) How does the following things look like? Anyone got pic? 1)Auto Gate Button Switch (Inside House). 2)Outdoor Auto Gate Control Panel.  Why you so worry? Ask the wireman do it for you |
|
|
|
|
|
weikee
|
Jun 19 2012, 05:05 PM
|
|
|
My 2 cents to share.
Sometime fast may not be good, especially if you have heavy gate. Learn this from the installer.
Imagine running a fast car, and sudden stop or hit something. So have many impact, like the gears, your gate weld, the bracket on the wall.
That is why starting and coming to end is always slower in some setup.
My neighbor had exactly this problem recently, the wall bracket nearly come off, and got to re weld and mount to another location. And program slower.
This post has been edited by weikee: Jun 19 2012, 05:07 PM
|
|
|
|
|
|
weikee
|
Jun 20 2012, 04:56 PM
|
|
|
QUOTE(mhhee @ Jun 20 2012, 04:47 PM) Old tech? Then what is new tech? Use solar :-) |
|
|
|
|
|
weikee
|
Jun 28 2012, 10:08 AM
|
|
|
QUOTE(JamesPond @ Jun 28 2012, 09:25 AM) Not the best deal if you ask me. That discount price is standard price outside. |
|
|
|
|
|
weikee
|
Jul 12 2012, 01:41 PM
|
|
|
You don't have to get branded, local oae good enough. As long service are good, spare parts easy obtain.
|
|
|
|
|
|
weikee
|
Jul 29 2012, 06:34 PM
|
|
|
QUOTE(Kingsman @ Jul 27 2012, 02:36 PM) [attachmentid=2968749] I'd like to share about this DC Moto brochure that talk about different type of swing technology. 1. Floor Concealed Rotary type - water seepage problem but the rotary motor is simple and reliable. 2. Surface Mounted push pull type - no water seepage problem but complicated and high joint stress design. (slower operation speed) 3. Surface Mounted Rotary type - no water seepage problem and smooth operation speed. Number 3 is improved design that eliminated the water seepage problem & slow swing speed. Anyone is using DC Moto GFM-905? Mind to share your thought? Point number 2 may not apply to arm now. Now the arm type don't use hydraulic, is screw type and is much higher torque and stronger. |
|
|
|
|
|
weikee
|
Jul 31 2012, 04:57 PM
|
|
|
QUOTE(napoli26 @ Jul 31 2012, 04:48 PM) haha, tats y, automatic gate is for convenience, not for security  Even lock using normal pad lock still can climb. IS it save in Malaysia? My colleague car just got rob last friday. He was ambushed by few men while he was heading to a nearby Restaurant at Ara for dinner on Friday. Crazy.. We are in save hand here with the gov. |
|
|
|
|
|
weikee
|
Aug 7 2012, 11:14 AM
|
|
|
QUOTE(Milo_O @ Aug 7 2012, 11:00 AM) Liuism, Yes, the attitude display was not professional at all. I was frustrated as i had planned the schedule way ahead.Ruined my planning.   Lessa, Luckily you didnt call them up. The service after sales is VERY POOR. Their consultation fee to go to your place is RM100. Thats if you can get them to go to your place in the first place.  Is ok to pay if is out of warranty, as long they can fix the problems or identify and let you know the repair cost. I notice the free auto Gate from Some developer not very reliable. My ex colleague repair her made in China arm gate for 7 times.now thinking to replace even is in warranty. My auto gate installer also did some repair, replace few China made. Please don't get China made Local is not expensive, is only few hundred more. |
|
|
|
|
|
weikee
|
Aug 22 2012, 03:10 PM
|
|
|
QUOTE(mikeyyh @ Aug 22 2012, 02:44 PM) recently bought an autogate system local brand OAE for 1.4k. Today just found out I need to install 4 bearing on the gate to make the closing/opening smoother. The same contractor who install the gate charge me RM300. Is it reasonable? I also need an extra motor cable pulling from my existing left panel gate to the right gate for the cost of RM300 as well? Is it reasonable? Thanks If your gate is recently installed, it should be done by the grill / gate provider. If is an old gate or come standard from house is difference case. 300 sound reasonable to me. Maybe you should ask for some discount since is same person doing it. maybe 200 if possible. |
|
|
|
|
|
weikee
|
Oct 30 2012, 06:03 PM
|
|
|
It have backup battery.
Well, some cheapo installer remove battery backup so it look attractive.
|
|
|
|
|
|
weikee
|
Dec 6 2012, 11:29 AM
|
|
|
QUOTE(NightFelix @ Dec 6 2012, 10:54 AM) Hey guys, just found this thread out, anyway what are the most minimum budget to turn my gate into automatic gate? any I saw that roadshow now latest tech is without tray right? is it got sensor to detect small children or something? With or without wiring? Without wiring start your budget 1.2k +- |
|
|
|
|
|
weikee
|
Dec 6 2012, 11:57 AM
|
|
|
You need wiring to power the automatic gate. Without wiring you can't have autogate. Well unless you invest on Solar.
So Wiring is a must, and some house come with it.
|
|
|
|
|
|
weikee
|
Dec 14 2012, 06:16 PM
|
|
|
My oae working good. Actually the two button remote have two additional function. Like pressing the single door button for 3 to 5 sec, the opposite door will open instead. If presses longer the opening mode will be very slow.
|
|
|
|
|
|
weikee
|
Jan 3 2013, 04:20 PM
|
|
|
QUOTE(phoenix69 @ Jan 3 2013, 10:19 AM) If its a small fix, I found that WD40 can do wonders.  Good kitchen cabinet polishing too. |
|
|
|
|
|
weikee
|
Jan 7 2013, 05:10 PM
|
|
|
I am not suprise, this type of autogate is easy open. Just a steel bar lift up the solenoid. I open up before.
|
|
|
|
|
Quote
0.0943sec
0.59
7 queries
GZIP Disabled