here's d number. I dont know his work quality yet as he now still doing my grille and gate. Due to be installed by end of june. Issac k&y iron works 0166921056

This post has been edited by Biskut coklat: Jun 17 2012, 01:07 AM

thanks skng03 & weikee for the info. I have drafted a diagram according to the info given. How does the connection from Auto Gate Button Switch (Inside House) to Gate Control Switch? Kindly refer attachment.
 Auto_Gate_Diagram.ppt ( 80k ) Number of downloads: 294

Thanks!

How does the following things look like? Anyone got pic?
1)Auto Gate Button Switch (Inside House).
2)Outdoor Auto Gate Control Panel.

Why you so worry? Ask the wireman do it for you

Indoor switches just ask electrician to match your existing sw, or ask your electrician..
Out door control box just 12"x16" pvc box, u go any house got auto gate one to see lor....

Nvm lar, help newbie lor

anyone know people doing fixing gate and auto gate?
my gate is rusting and need to fix and put auto gate.

if my house already have point and box at the side of the gate, so do i need any wirering cost to install autogate? or its just point and need wirering. My house gate enterance is about 20 fts so which autogate system that suitable for me. no need super power function to apply autogate at my house

can someone recon me?

gate can go kajang do.. got awsm mia price

what is awsm mia?
you got their contact? I am not changing the gate but I need to repair my gate. it is due to poor workmanship last time.

I just installed M3 668 swing motor, to my folding gate. Cabling + motor + gate light is RM2300.
The speed is fast as my 16ft folding gate open/close within 5 secs.
Anyone installed this type of motor? My contractor said it's malaysia brand.

My contractor recommend it because it is build without nylon gearing, all copper and cast iron. I also compared with DC motor and M3 is more heavier and smaller in size.
Unfortunately i cannot find more info from the internet as compare to DC motor.

This post has been edited by cliffang83: Jun 19 2012, 01:18 PM

This one?

M3-668

Yes, limited info yo..

My 2 cents to share.

Sometime fast may not be good, especially if you have heavy gate. Learn this from the installer.

Imagine running a fast car, and sudden stop or hit something. So have many impact, like the gears, your gate weld, the bracket on the wall.

That is why starting and coming to end is always slower in some setup.

My neighbor had exactly this problem recently, the wall bracket nearly come off, and got to re weld and mount to another location. And program slower.

This post has been edited by weikee: Jun 19 2012, 05:07 PM

Nowadays autogate system like DCMoto & Casa Asia come with micro computer chipset inside which is able to learn & control. Which is mean it move fast when open but when it almost reach the end it will stop, the same action applied when you close the door. Therefore, no banging or impact happen.

Yes, almost most of the new design motor have 2 speed working in different voltage...
Mine operate in 18v and comes to 12v as the door is reaching closing/opening side.

if just the motor n install only.. how much?
i is pun looking for to replace my old autogate..


DC moto... awsm ah, guise?

my new house already have point and box at the side of the gate. is it means i need any extra wirering or i can save cost for certain wirering to install autogate. i'm new in this, someone plz explain to me....