+1 bro, reliability and after sales service is very important for alarm and autogate

Anything will breakdown, no matter how reliable and quality, it will break down one day. Even human will fall sick. And power failure do happen.

that is why we need good after sales service

Still I don't expect them to come immediately. A small door still have its good use.

im thinking to get a small door too for my autogate...but after consider it will spoilt the gate design , so i end up not to having one......after survey for quite sometimes i decided to get a DC moto GFM 905 premium....they quote me RM 1350....additional 400 for the wire and etc....which mean lump sum would be RM 1800....im ok with the price, ok with the DC moto itself .....my question is this installer from seremban.....as been told by them (installer) they even cover up klang Valley area.....so for those sife here...its safe to trust them for after sales service....im from PJ....tq

1800 price with keypad, siren and beam sensor???

The DC moto 905 for 1.35k is quite cheap. I'm also consider to get this model but was quoted 1.6k. If the seller is reliable and good service
after sale, definitely will appeal to lot of potential customer. Too bad it's from Seremban. Pls let us know if u engage them.

what is the package included for 1.6K? I was quoted with 1.4K including installation with 1 Keypad + 3 remotes, beam not sure included or not as I didnt notice that, but from what I survey, the beam sensor cost RM180

no beam sensor and siren.....im not going into beam sensor...but siren yes....my other question is after the autogate complete is my house alarm....can the autogate panic button relate to house panic alarm as well....coz when "panic " situation occur..i dont wanna press 2 or 3 remote...as i need one quick button that activate all....im kindda new to all this, pls advise

why need add panic button on the auto gate when you already having it in your house alarm? Just use the alarm panic button. Anyway the siren or what ever it is called on the house alarm will be much louder as compared to the auto gate....


From what I was told, there are various model of the controller panel for DC Moto. Different controller board even for the same model. So, do check this out with your supplier/ installer. Probably this is also the reason for the price difference...
What ever it is I am a strong believer that having a reliable after service installer is important unless after the installation, you are able to get another installer to provide the maintenance service. I remember an incident one morning when I received a call from a friend saying the he could not drive out his car from the porch as he auto gate is faulty and even the manual override switch is not working. His was using the arm type. He was not able to contact his auto gate installer who has gone missing.

This post has been edited by kelvyn: Feb 20 2012, 08:47 AM

DC Moto GFM905 with the whole complete accessories - beam sensor, auto closing timer -- approx RM1800
DC Moto without sensor, auto closing timer (they say might give issue thus better to not have) -- approx RM1600
All comes with standard keypad, 3 anti-spy remote
Armour cable not involved.
-- Compilation from my previous research.

A newbie question here.

We r planning to install a folding automate. Are the gate and the autogate moto/system installed by different installers? We were quoted rm3,800 for powder coated wrought iron with autogate for a 15.5 ft. Is this ok?

Thanks.

The gate and auto gate system are 2 different thing.
There are suppliers/ contractors that provide service to supply and install the gate & the auto gate system. They will take care of the coordination and save you the hassle. But you end up paying a premium for this.
Alternatively, you could look for the gate manufacturer and auto gate supplier separately.

BTW, doubt that it is an actual wrought iron gate that's being quoted to you. Wrought iron gates are heavy and expensive.

This post has been edited by kelvyn: Feb 20 2012, 01:49 PM

Price you got is consider reasonable. Does the gate galvanized as well? If galvanized then it's definitely worth it. Normally, Autogate system is around 1k plus but I bet those door package comes with autogate system. The autogate is not that good compared with the rest.

one of my gate pillar is those with built-in mail box and garbage bin which has the front and side doors. can DC Moto 905 can be fixed on such pillar? I'm afraid DC Moto might block the garbage bin side door since the auto gate is more or less tower shape.

thinking to installed from autogate malaysia...any comment ....hey by the way do u have any recommend supplier for this gfm 905 tq in advance

I suggest that you survey around 1st before you commit. There are plenty of suppliers.
If you need further clarification, PM.

Tired for survey.....just need any recommend from sifu here.......by the way autogate malaysia sales person damn lansi....sorry to say they miss one genuine buyer....sigh

Is it? My bro bought OAE autogate from them. He said ok & recommended me also. By the way, I'm looking for this DCMoto GFM-905 as well. My friend have contact that carry this brand. I will talk to him tomorrow & share it here if the price & service are right.

I am going to grab my DCMoto GFM-905 too