Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Automatic Gate, How much do you need to install one ?

views
     
tecksoon
post Feb 18 2012, 06:37 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
what is armour cable?
tecksoon
post Feb 20 2012, 12:59 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(kelvyn @ Feb 19 2012, 09:43 PM)
I don't have small door in any of my autogate. I find it to be a nuisance.
Use a reliable auto gate and don't have to worry about breakdown. Having a reliable installer is also important for after sales service. Any problem can be resolve quickly.
*
im thinking to get a small door too for my autogate...but after consider it will spoilt the gate design , so i end up not to having one......after survey for quite sometimes i decided to get a DC moto GFM 905 premium....they quote me RM 1350....additional 400 for the wire and etc....which mean lump sum would be RM 1800....im ok with the price, ok with the DC moto itself .....my question is this installer from seremban.....as been told by them (installer) they even cover up klang Valley area.....so for those sife here...its safe to trust them for after sales service....im from PJ....tq
tecksoon
post Feb 20 2012, 02:29 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(leeyung @ Feb 20 2012, 01:24 AM)
1800 price with keypad, siren and beam sensor???
*
no beam sensor and siren.....im not going into beam sensor...but siren yes....my other question is after the autogate complete is my house alarm....can the autogate panic button relate to house panic alarm as well....coz when "panic " situation occur..i dont wanna press 2 or 3 remote...as i need one quick button that activate all....im kindda new to all this, pls advise
tecksoon
post Feb 20 2012, 08:41 PM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(kelvyn @ Feb 20 2012, 08:39 AM)
why need add panic button on the auto gate when you already having it in your house alarm? Just use the alarm panic button. Anyway the siren or what ever it is called on the house alarm will be much louder as compared to the auto gate....
From what I was told, there are various model of the controller panel for DC Moto. Different controller board even for the same model. So, do check this out with your supplier/ installer. Probably this is also the reason for the price difference...
What ever it is I am a strong believer that having a reliable after service installer is important unless after the installation, you are able to get another installer to provide the maintenance service. I remember an incident one morning when I received a call from a friend saying the he could not drive out his car from the porch as he auto gate is faulty and even the manual override switch is not working. His was using the arm type. He was not able to contact his auto gate installer who has gone missing.
*
thinking to installed from autogate malaysia...any comment ....hey by the way do u have any recommend supplier for this gfm 905 tq in advance
tecksoon
post Feb 20 2012, 09:51 PM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(kelvyn @ Feb 20 2012, 09:23 PM)
I suggest that you survey around 1st before you commit. There are plenty of suppliers.
If you need further clarification, PM.
*
Tired for survey.....just need any recommend from sifu here.......by the way autogate malaysia sales person damn lansi....sorry to say they miss one genuine buyer....sigh
tecksoon
post Feb 20 2012, 10:42 PM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(mhhee @ Feb 20 2012, 09:54 PM)
Is it? My bro bought OAE autogate from them. He said ok & recommended me also. By the way, I'm looking for this DCMoto GFM-905 as well. My friend have contact that carry this brand. I will talk to him tomorrow & share it here if the price & service are right.  smile.gif
*
maybe when the sales person talk to me in bad mood... wink.gif anyway thats already turn me off....so another supplier
tecksoon
post Feb 20 2012, 11:29 PM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(weikee @ Feb 20 2012, 10:49 PM)
Maybe the Sales Man is father of the KFC staff.
*
should i do a conference...sorry forumer...abit out topic...
tecksoon
post Feb 22 2012, 12:40 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(weitatt @ Feb 21 2012, 09:11 PM)
Both DCMOTO & Casa Asia are made in Penang. Casa is an offshoot of DCMoto.  CASA claims that they're improved on the DCMoto design.   If you listen to both motors in operation you'll find that the CASA system is quieter.

These above ground rotating arm systems are definitely an improvement over the underground systems as they are not prone to flooding.  However they have a more complicated gear system compare to telescopic armgate systems.

Make sure that you install a gate with a rolling/hopping code system for the remote.
*
i agree with u as DC moto is quiet loud compare to CASA....but what to do ...i like DC more tongue.gif


Added on February 22, 2012, 12:41 amMake sure that you install a gate with a rolling/hopping code system for the remote.


-----Yes SIR

This post has been edited by tecksoon: Feb 22 2012, 12:41 AM
tecksoon
post Mar 8 2012, 02:51 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
its a mild steel....not stainless, nowaday trend using this coz its cheaper and lighter, my gate using it too , some said stainless steel have an impact on feng shui , (if a believer ) either good or bad....
tecksoon
post Mar 9 2012, 03:24 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(kelvyn @ Mar 8 2012, 08:45 AM)
stainless steel having an impact on feng shui...  hmm.gif
Maybe that's why one of my neighbour who is a strong believer in this, changed theirs...
*
yes it did ( for those believer ) coz its spark , some installed for maintenance free , no paint for several years ,
as for myself after a consult from master its not suit me , so i did my mild steel (p/s i dont like stainless steel too ) reason so outdate , but the bottom of all its depend on owner decision and perspective ,


Added on March 9, 2012, 3:28 amafter a while i follow this topic , ppl tend to compare price rather than establishment of the autogate supplier, what is RM 200 more if u got peace of mind after service, why not concern more on this that price, u may get RM 1000 DC moto gmf 905 but cost alot prob and the service below expectation as been mention b4 in several reply, remember u get what u pay

This post has been edited by tecksoon: Mar 9 2012, 03:28 AM
tecksoon
post Mar 9 2012, 11:13 AM

Getting Started
**
Junior Member
75 posts

Joined: Sep 2011
QUOTE(weitatt @ Mar 9 2012, 08:36 AM)
RM200 is the cost for your installer to come service the gate once or twice.  many installers are engaging independent contractors to do a one time installation with no backup technicians to provide support. That's why there are so many one-man-show autogate companies which do not need an office or any full time staff to operate their business.
*
this is what my feedback on this agenda; price concern more important for everyone. As you said one man show, what if this one man gone after one year , whose gonna back up for any default for your gate because his/her autogate cheaper, budget indeed important to everyone but never neglect the aftersales service or the service they can provide, if the cost for installed is extra additional RM 100 or RM 200 , its ok as long the workmanship is satisfied, or else screw them up side down, this is what i told them first before purchase , consumer rite, always got tribunal, smile.gif

 

Change to:
| Lo-Fi Version
0.0218sec    0.40    7 queries    GZIP Disabled
Time is now: 27th November 2025 - 11:07 AM