errr...mind if i join? hye everyone....i just bought this board...and iam just back to amd since i use intel almost 2 years...last time amd 64 s9s9 got FSB:DDR ratio....this time i notice didnt have @ either i dunno .....iam using AMD X2 4000 pair up with OCZ 1GBx2 800mhz 5-5-5-15 Vista Upgrade RAM module....the only option is...i only can set the limitation of the ram from 533 till 1066...when i increase the FSB to 240mhz, only the proc been oced but the ram still at stock speed...huhuhu can some shifu...otai...orang lama...oc guru....errr what else arrr....heheh tell me what iam missing past few years ...thx guys

how come?? suppose the rams oced together with the proc.
what divider did u use?? do u set the ram speed to 667??or at stock speed 800mhz??

yah supposed to be...but i oced fsb till 240 the proc only oced but the ram still 800mhz....i've been serching the ram divider but dun have...some1 plsss help me

post the CPUZ and memset SS here~

ermmm...ok... but how u guys set the ddr divider?? i find in the bios not found...

yup no ram divider in m2ne weh'

here the things...i set the fsb to 220.....HTT 5x...and the DDR to 1066 5-5-5-15 1.9v....the cpu-z show like above...iam using latest cpu-z and 1202 bios

actually what the status of this board? beta? prototype? huhuhu lack of features and v tweak

This post has been edited by fatalynx05: Dec 5 2007, 03:47 PM

@fatalynx05

i use same proc & ram as u r using rite now, but i can oc it till 2.5Ghz using
x10 multiplier..i increase the vCore to 1.2 & vDimm to 1.9..
i think u can try it..

or anyone can suggest me a better value to oc it higher?

This post has been edited by onslought: Dec 6 2007, 12:31 PM

my default vcore stated in bios is 1.3 i also forgot u also using OCZ vista upgrade? what is ur speed and timings now?

im not using OCZ vista upgrade..im at work right now, later tonight i post my cpu-z pic..

---

Added on December 6, 2007, 5:57 pmhere are some add on





This post has been edited by onslought: Dec 6 2007, 05:57 PM

Success clock my 3800 F3 @ 3.0Ghz on Asus M2N-E

congratss!!

do u have any idea to oc my 4000 brisbane higher?

dont blame the board, i think the features quite ok for newbies in ocing. others can get higher result with this mobo, y not u??

Congrats... can get higher than that??
coz i doubt this mobo manage to get higher result stable with F3 proc ((3.2-3.7ghz), thats y i pass on getting the F3 last time...and no money too at that time...

edit:
@onslought
u may change the cpu divider by lowering ur rams to 533, then try to push ur cpu freq more...i think ur brisbane can get 3.0ghz.
coz from ur CPU-Z, seems u got quite good rams. 833.9mhz at 1.95v Vdimm is good u know...

This post has been edited by rainingzero: Dec 7 2007, 11:22 AM

i use kingston hypnix ram..
later tonight i try oc it again..thanks bro..

hynix?? what chips used?? coz last time using hynix Fp-y5, only manage to oc till 750++ at 1.95Vdimm...

im not sure..how to check?

take our ur rams and check at the chips....
usually printed at the chips...

lol... m2n-e.. my name.. ahaha.. lolz.. jk.. it is my nick after proud using untill..... dunno what happen.. cannot turn on cpu.. now change to m2n-DH.. successfully clock my AMD x2 +4000 2.0ghz to 3.8ghz with stock fan and psu.. lol.. maybe thats y my mobo died..

r u sure 4000 overclock to 3.8 ghz ?

yessir.. and my mobo dead bye bye.. change to m2n-DH ouh ya, the heat aa.. around 80-99 degree.. lolz..

This post has been edited by m2n-e: Dec 7 2007, 12:40 PM