QUOTE(hirano @ Dec 29 2020, 03:13 AM)
Any reviews?🪑~~The Chair Discussion Thread~~💺, Office, Gaming, Ergonomic, Lazy Chairs
🪑~~The Chair Discussion Thread~~💺, Office, Gaming, Ergonomic, Lazy Chairs
|
|
Dec 29 2020, 08:55 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,724 posts Joined: Aug 2008 |
|
|
|
|
|
|
Dec 29 2020, 02:01 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,724 posts Joined: Aug 2008 |
I think this is a very interesting read. Gives me a different perspectives about Gaming chairs, I always thought that they are pretty bad ergonomically but it doesn't seem so!
It is as good as it gets, of course incomparable with the true ergonomical chair but still pretty good! Gaming Chair is Good for your back! |
|
|
Dec 30 2020, 10:29 AM
|
![]() ![]() ![]()
Junior Member
493 posts Joined: Apr 2009 From: The Fifth Dimension |
QUOTE(vassilius @ Dec 28 2020, 03:52 PM) i am considering the following three models: 1) Amoffice - Fennel Mesh Chair Highback - RM712 https://shopee.com.my/AM-Office-Fennel-Mesh...7639.3432016561 2) Alterseat - DT330 Prime - RM699 https://www.alterseat.com/products/dt-330 3) Merryfair - Anggun - RM660 https://merryfairstore.com/product/1/anggun anyone can suggest me which one to go for? thanks. Was comparing real hard between Merryfair and Alterseat due to the warranty. Merryfair 5 years warranty on the chair mechanism but not include wear and tear of cushion and sunken seat. However Alterseat cover these and its 10 years warranty somemore. I was quite surprised that Alterseat covered even wear and tear. in the end, i chose Anggun as the WhatsApp customer care contact gave me additional 20% discount. So i got the chair with headrest at RM528, which i think it's a pretty good deal. Furthermore, i will be using this at home, not office. WFH will probably be temporary and at most until mid of 2021, so the chair will most likely be in good condition even after 5 years. Another plus is the design which i quite like the honey orange cushion and grey mesh compared to all black office chair design chair will arrive in 10 days, hopefully it will be a good one. will update again by then. |
|
|
Dec 30 2020, 10:33 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,234 posts Joined: Sep 2006 |
I have and always recommend steelcase chairs
Steelcase Leap - 2.5k~ ish. Steelcase Think - 2k~ish Price may change I have sat extensively on both chair for long hours due to WFH. They are very comfortable and provide good support. Material quality is awesome. I have the Leap for 2.5 years and it is still like new. This post has been edited by kaiserreich: Dec 30 2020, 10:33 AM |
|
|
Dec 30 2020, 10:36 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
All Stars
13,773 posts Joined: Jan 2006 From: stress & confuse world |
QUOTE(miyakochan89 @ Dec 29 2020, 02:01 PM) I think this is a very interesting read. Gives me a different perspectives about Gaming chairs, I always thought that they are pretty bad ergonomically but it doesn't seem so! when choosing the chair, always look for best back support and ergonomically. comfortable doesn't mean you will get a back supportIt is as good as it gets, of course incomparable with the true ergonomical chair but still pretty good! Gaming Chair is Good for your back! some people condemn gaming chair but little did they know the back support is important there |
|
|
Dec 30 2020, 10:36 AM
|
![]() ![]()
Junior Member
87 posts Joined: Sep 2015 |
QUOTE(Spitzer @ Dec 28 2020, 03:51 PM) I won’t ever buy an ikea office chair, not for something that i’ll be sitting on for endless hours on a daily basis, it’s an investment on your self, your health and ergonomics. Not everyone is as rich as you la bro.. 4-5k is more than my monthly salaryI always laugh at young people(my peers) who say why so young need this and that, when they fail to realise the internal damage is done, just they’re not feeling it yet. Anyway, i got a herman miller chair for 4-5k, not bothered to remember the model name, but it’s heavy as shit, with high quality mesh back and some really breathable solid feeling cushion as seat, upgraded the wheels with “roller-blade” style wheel so i can roll from my working area to dry kitchen then toilet at lightspeed |
|
|
|
|
|
Dec 30 2020, 11:01 AM
|
![]() ![]() ![]()
Junior Member
493 posts Joined: Apr 2009 From: The Fifth Dimension |
QUOTE(kaiserreich @ Dec 30 2020, 10:33 AM) I have and always recommend steelcase chairs understood that a few thousands are just pocket change to you, but to many, that range is premiumSteelcase Leap - 2.5k~ ish. Steelcase Think - 2k~ish Price may change I have sat extensively on both chair for long hours due to WFH. They are very comfortable and provide good support. Material quality is awesome. I have the Leap for 2.5 years and it is still like new. |
|
|
Dec 30 2020, 11:26 AM
Show posts by this member only | IPv6 | Post
#28
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,456 posts Joined: Jan 2003 From: 家で折ること |
QUOTE(kaiserreich @ Dec 30 2020, 10:33 AM) I have and always recommend steelcase chairs I just got myself the steelcase series 2 for rm1800(proudly made in puchong) after a 2 months waiting period (initially im going to order the Leap as it's supremely comfortable, but that doesn't have a mesh back and I don't like how the Think looks like), replacing my 6 months old Marcus (I didn't get any discomfort sitting on the Marcus for > 10 hours though)Steelcase Leap - 2.5k~ ish. Steelcase Think - 2k~ish Price may change I have sat extensively on both chair for long hours due to WFH. They are very comfortable and provide good support. Material quality is awesome. I have the Leap for 2.5 years and it is still like new. Marcus's mesh back has more give but Series2 has got a lot more adjustments to make sure my lumbar area is always supported Marcus' seat cushion feels softer and plushier compared to Steelcase's Side note: anyone looking for a 6months old fabric Marcus can PM me Lurker liked this post
|
|
|
Dec 30 2020, 11:31 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,724 posts Joined: Aug 2008 |
QUOTE(kaiserreich @ Dec 30 2020, 10:33 AM) I have and always recommend steelcase chairs Steelcase Leap - 2.5k~ ish. Steelcase Think - 2k~ish Price may change I have sat extensively on both chair for long hours due to WFH. They are very comfortable and provide good support. Material quality is awesome. I have the Leap for 2.5 years and it is still like new. QUOTE(Beach_Boy @ Dec 30 2020, 11:26 AM) I just got myself the steelcase series 2 for rm1800(proudly made in puchong) after a 2 months waiting period (initially im going to order the Leap as it's supremely comfortable, but that doesn't have a mesh back and I don't like how the Think looks like), replacing my 6 months old Marcus (I didn't get any discomfort sitting on the Marcus for > 10 hours though) Where did you all get your Steelcase? Can I have the shop name or GPS please?Marcus's mesh back has more give but Series2 has got a lot more adjustments to make sure my lumbar area is always supported Marcus' seat cushion feels softer and plushier compared to Steelcase's Side note: anyone looking for a 6months old fabric Marcus can PM me I would like to go and try. Am hunting for a good chair after the really horrible experience I have with a certain shop. Don't they get hot since they are not really mesh? I find fully mesh one really comfortable I think. Am looking these chairs also from Evis.com.my Any reviews or comments? But crazy expensive. https://www.evis.com.my/products/Seating-c40518006 This post has been edited by miyakochan89: Dec 30 2020, 11:35 AM |
|
|
Dec 30 2020, 11:36 AM
|
![]() ![]() ![]()
Junior Member
368 posts Joined: Oct 2013 From: Here |
QUOTE(miyakochan89 @ Dec 30 2020, 11:31 AM) Where did you all get your Steelcase? Can I have the shop name or GPS please? have u went and tried alterseat dt 330? i feel like buyin that chair soonI would like to go and try. Am hunting for a good chair after the really horrible experience I have with a certain shop. Don't they get hot since they are not really mesh? I find fully mesh one really comfortable I think. Am looking these chairs also from Evis.com.my Any reviews or comments? But crazy expensive. https://www.evis.com.my/products/Seating-c40518006 |
|
|
Dec 30 2020, 11:38 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,234 posts Joined: Sep 2006 |
QUOTE(vassilius @ Dec 30 2020, 11:01 AM) In some cases, what you say is correct. I understand your pov and many of my friends give the same feedback. But i want to point out that so many people can spend 2-3k on a phone that last them… at most 4 years to play some games and surf /k fb tiktok. Even a budget phone cost 1k and these crap out in 3 years max. But when talking about 2k on a chair that lasts 10 years, sorry no thanks i already have a (crap) chair. Why not look from a different perspective. Good chairs are expensive and you pay for what you get. Steelcase also have cheaper option that is the Steelcase Lets B which goes for low RM1xxx I got the steelcase leap and isn't pocket change. I saved hard for it. The Think chair is my office standard issue chair. I did not spend a cent on it. |
|
|
Dec 30 2020, 11:41 AM
Show posts by this member only | IPv6 | Post
#32
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,456 posts Joined: Jan 2003 From: 家で折ること |
QUOTE(miyakochan89 @ Dec 30 2020, 11:31 AM) Where did you all get your Steelcase? Can I have the shop name or GPS please? zenpro has a showroom in kelana jaya, their factory's in sg buloh I would like to go and try. Am hunting for a good chair after the really horrible experience I have with a certain shop. I bought the series 2 without trying it on though, but I read the review that it's quite similar to the Think (of which I've tested and liked), I don't turn on aircond at home a lot so I decided to forgo the Leap good thing about steelcase is if you get the made in Malaysia one, you can customize the color combination without adding too much onto the lead time if you really wanted to indulge, pay XTRA mid valley a visit and try on their Okamura Contessa 2, the seat cushion is supremely comfortable I splurge on a better chair hoping that it could save me some trips to the Chiro, if it saves me a few trips to the Chiro the chair essentially paid for itself already |
|
|
Dec 30 2020, 11:45 AM
Show posts by this member only | IPv6 | Post
#33
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,456 posts Joined: Jan 2003 From: 家で折ること |
QUOTE(miyakochan89 @ Dec 30 2020, 11:31 AM) Where did you all get your Steelcase? Can I have the shop name or GPS please? evis has a showroom in cheras, pay them a visit and test on their thingsI would like to go and try. Am hunting for a good chair after the really horrible experience I have with a certain shop. Don't they get hot since they are not really mesh? I find fully mesh one really comfortable I think. Am looking these chairs also from Evis.com.my Any reviews or comments? But crazy expensive. https://www.evis.com.my/products/Seating-c40518006 |
|
|
|
|
|
Dec 30 2020, 11:50 AM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
758 posts Joined: Aug 2008 |
|
|
|
Dec 30 2020, 11:52 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,724 posts Joined: Aug 2008 |
QUOTE(Beach_Boy @ Dec 30 2020, 11:41 AM) zenpro has a showroom in kelana jaya, their factory's in sg buloh The Okamura looks nice but no headrest. I bought the series 2 without trying it on though, but I read the review that it's quite similar to the Think (of which I've tested and liked), I don't turn on aircond at home a lot so I decided to forgo the Leap good thing about steelcase is if you get the made in Malaysia one, you can customize the color combination without adding too much onto the lead time if you really wanted to indulge, pay XTRA mid valley a visit and try on their Okamura Contessa 2, the seat cushion is supremely comfortable I splurge on a better chair hoping that it could save me some trips to the Chiro, if it saves me a few trips to the Chiro the chair essentially paid for itself already WOW! They can even customise steelcase? I should just go to their S.Buloh factory maybe. So you just called them and ordered online or something? QUOTE(Beach_Boy @ Dec 30 2020, 11:45 AM) yeap, that's what I'm gonna do after I settle my case first. This post has been edited by miyakochan89: Dec 30 2020, 11:56 AM |
|
|
Dec 30 2020, 11:53 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,724 posts Joined: Aug 2008 |
QUOTE(Archemedia @ Dec 30 2020, 11:36 AM) Errr.. nope. I don't see why I would go and try that model cause what I want from a chair is different. xDBut everyone's body is different, you should try if you could to see if it's comfortable for you. |
|
|
Dec 30 2020, 12:01 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,718 posts Joined: Jul 2013 |
QUOTE(kaiserreich @ Dec 30 2020, 11:38 AM) In some cases, what you say is correct. I understand your pov and many of my friends give the same feedback. But i want to point out that so many people can spend 2-3k on a phone that last them… at most 4 years to play some games and surf /k fb tiktok. Even a budget phone cost 1k and these crap out in 3 years max. But when talking about 2k on a chair that lasts 10 years, sorry no thanks i already have a (crap) chair. did you buy at the same place as the guy below?Why not look from a different perspective. Good chairs are expensive and you pay for what you get. Steelcase also have cheaper option that is the Steelcase Lets B which goes for low RM1xxx I got the steelcase leap and isn't pocket change. I saved hard for it. The Think chair is my office standard issue chair. I did not spend a cent on it. oh yes, my office using steelcase think. didnt make full use of it after switch office 2 years ago. now WFH baru appreciate. HAHA QUOTE(Beach_Boy @ Dec 30 2020, 11:41 AM) zenpro has a showroom in kelana jaya, their factory's in sg buloh can share how much you paid for your chair? i regret not buying it in may. should have just bought earlier instead of dining table chair. I bought the series 2 without trying it on though, but I read the review that it's quite similar to the Think (of which I've tested and liked), I don't turn on aircond at home a lot so I decided to forgo the Leap good thing about steelcase is if you get the made in Malaysia one, you can customize the color combination without adding too much onto the lead time if you really wanted to indulge, pay XTRA mid valley a visit and try on their Okamura Contessa 2, the seat cushion is supremely comfortable I splurge on a better chair hoping that it could save me some trips to the Chiro, if it saves me a few trips to the Chiro the chair essentially paid for itself already |
|
|
Dec 30 2020, 12:04 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,234 posts Joined: Sep 2006 |
QUOTE(adele123 @ Dec 30 2020, 12:01 PM) did you buy at the same place as the guy below? nope. bought in penang.oh yes, my office using steelcase think. didnt make full use of it after switch office 2 years ago. now WFH baru appreciate. HAHA can share how much you paid for your chair? i regret not buying it in may. should have just bought earlier instead of dining table chair. i am quoting rrp. some chairs are cheaper if you have corp discount or buy in bulk. That;s the only thing i hate about Steelcase. |
|
|
Dec 30 2020, 12:05 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,724 posts Joined: Aug 2008 |
QUOTE(kaiserreich @ Dec 30 2020, 10:33 AM) I have and always recommend steelcase chairs Steelcase Leap - 2.5k~ ish. Steelcase Think - 2k~ish Price may change I have sat extensively on both chair for long hours due to WFH. They are very comfortable and provide good support. Material quality is awesome. I have the Leap for 2.5 years and it is still like new. QUOTE(Beach_Boy @ Dec 30 2020, 11:41 AM) zenpro has a showroom in kelana jaya, their factory's in sg buloh Huh, I just realised Steelcase Leap cannot be tilted back based on the YT videos I saw, seems limited tilt. Can anyone confirm? That's out of my choice already then. I bought the series 2 without trying it on though, but I read the review that it's quite similar to the Think (of which I've tested and liked), I don't turn on aircond at home a lot so I decided to forgo the Leap good thing about steelcase is if you get the made in Malaysia one, you can customize the color combination without adding too much onto the lead time if you really wanted to indulge, pay XTRA mid valley a visit and try on their Okamura Contessa 2, the seat cushion is supremely comfortable I splurge on a better chair hoping that it could save me some trips to the Chiro, if it saves me a few trips to the Chiro the chair essentially paid for itself already This post has been edited by miyakochan89: Dec 30 2020, 12:07 PM |
|
|
Dec 30 2020, 12:14 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
4,234 posts Joined: Sep 2006 |
QUOTE(miyakochan89 @ Dec 30 2020, 12:05 PM) Huh, I just realised Steelcase Leap cannot be tilted back based on the YT videos I saw, seems limited tilt. Can anyone confirm? That's out of my choice already then. what do you mean titled back?i can sit like this guy and I can lock it in place if i want to. ![]() |
| Change to: | 0.0170sec
0.59
6 queries
GZIP Disabled
Time is now: 24th November 2025 - 08:48 PM |