This post has been edited by sHawTY: Dec 12 2024, 09:35 AM

Important Update for Kingston KC3000 and Kingston Fury Renegade 4.0 SSD Owners
Please update your SSD firmware to the latest version using the Kingston SSD Manager.
Latest Firmware: EIFK31.7 (same firmware for KC3000 & Fury Renegade 4.0

PS5 Users:
If you are using the KC3000\Fury Renegade 4.0 SSD in a PS5, you will need to temporarily remove the SSD, install it in a PC, and perform the firmware update using the appropriate software.

Source: https://www.reddit.com/r/pcmasterrace/comme...rs_update_your/

Note: If you are using an SSD with a Phison E18 controller from another manufacturer, it is strongly recommended to check your manufacturer's support page for any available firmware updates.

I had a disappointing experience with the SN750. It failed suddenly and without warning in under six months. I went through the RMA process, received a replacement, and unfortunately, the replacement also failed in less than a year. After the second RMA, I decided to sell it, as I completely lost confidence in WD's NVMe SSDs.

For context, I also use an SX8200 Pro and a 970 EVO on the same motherboard, and both have been running reliably to this day. Ironically, the SN750 was the newest among them.

What's good SATA SSD with DRAM nowadays?
Looking for 1TB

KC600 so many fakes in Shopee/Lazada