How about adding a 9v?

Well to be fair...due to Sony wmport usage, you see at least 2 more extra cables in the picture. If I were to use just a handphone/dap with micro usb, wiring would be simpler.

This post has been edited by raif: Nov 10 2019, 04:35 PM

unfortunately the UD130 doesn't come with an inline regulator, so you'll have to strictly use a 5V regulated input.

does the ud130 require external power?

No it doesn't. It's just a rather individual case above. The USB 2.0 standard spec is rated for 0.5A per port and the UD130 draws less than half of that.

Well, technically ud130 does require external power because it doesn't have a battery. When you connect it directly to a pc or phone, it draws power from the connecting device so this is external power. If the connecting device cannot supply power then it needs the split y connection as shown from my usecase with power drawn from power bank.

Edit: Of course, if you say that usb powered does not count as external supply, then yes one might say ud130 does not need external power . I'm editing this post coz I saw somewhere that a device that is usb powered, a reviewer just said that the unit does not need an external power.

This post has been edited by raif: Nov 13 2019, 06:51 AM

You are correct.

So is everyone enjoying their UD130? Asking because I'm thinking to get one as my first desktop dac/amp, mainly for earbuds, iems & headphones <150 ohms. Any drawbacks that I should be aware of? Similarly, what are the main advantages of the ud130? I'm mostly concerned with sound quality and the tactile feed of that volume knob. Any feedback appreciated. Thanks!

How does the UD 130 compare to FX Audio Dac-X6 and SMSL M3? Looking to buy my first dac/amp.

Just received my U130 today. Doing a quick listening test. I can say it is a step up from the U125 (which I have too). I am also comparing it to the Mojo. Honestly its not its equal but for RM300 you cannot go wrong. I am impressed to say the least. Kudos. Malaysia Boleh!

This post has been edited by 2tigers: Apr 27 2020, 05:41 PM

Thank you very much for your kind words and support!

Anyone tried to connect the UD130 to an iPhone?

I don't think the iPhone can power the unit. It does not have a battery of its own.

Will try to experiment once this adaptor reach my doorstep

Not necessarily so. My old Motorola android phone powers the UD130 via USB OTG just fine.

Ya, as stated in their website.
https://stoneracoustics.com/ud130/

"Android USB OTG Support
The UD130 works with your modern Android Smart Phones via the USB OTG.
*Some phones may not work with the UD130, contact us for more details."

Will wait for the Lightning to USB3 and test it out.

Yes, that is correct. As mentioned, my Motorola phone powers the UD130 just fine. However, a Huawei Nova 2i does not.

Managed to make the UD130 work on IOS, but with a catch.
You need to connect the power to the CCK Adapter to make things work. iPhone cannot power up the UD130 by itself.

What is the max line-out voltage for ud130? Doesn't say in the spec but on the site of ud125, the max line out voltage is stated at 4.8Vrms. Any idea for ud130? Thanks

This thread has long been abandoned...

My pc went dead and I tried plugging UD125 to my Sony X90J. I was surprised it works... clean high quality audio. Forget about using bluetooth, arc(earc)... I'm happy it's so flexible.