Bro, I'm not meant to ask for your technical advice and suggestion. Do you really replaced with non rechargeable battery on your Ding ding Pai dashcam? The ding ding Pai dashcam pcba is build to recharge the rtc battery during powered on.

The things you replaced with non rechargeable with it. Do you ever think that the cr2032 will explode or bulging if it's in continuous charging state? Ever think of the consequence's?

Hi, you still need to piggyback the fuse box for power source. I would suggest you don't bother much with parking kits if you care about warranty. Otherwise you will paranoid everytime sending into service center.

Hi, does your model A129 plus came with emmc 16gb model? Samsung pro endurance is no longer supported by viofo dashcam officially.

You can try to tap the camera to simulate the '!' recording or just press the emergency button to check your ro folder.

So pressing emergency button is working fine. Since you have hardwired, I believe you have the correct wiring and using parking mode.

You should do test switch off engine, then some hard tapping the camera body from side to trigger the '!'. Then check the RO folder.

If you not using parking mode, the camera should have remaining power to safe writing into memory for few second upon engine off. Any video recording is corrupted on the last file or not written into memory is due to capacitor or memory card issue.

Somehow Samsung pro endurance is no longer supported by viofo officially might be issue here or the camera capacitor.

It's strange that you get 1 min recording after engine off. Normal recording without parking mode enable, you only get the recording saved successfully just right after engine off. You won't get the next 1 min after engine off.

Viofo memory card

SanDisk High Endurance 128gb no issue on Toyota dashcam.

Been awhile. New toys Viofo A329 on pssd indoor endurance testing.