Mohawk brand is direct plug and play with Bezza speaker socket but I rather you buy the speaker harness adapter and can use more brands.

Ya i feel more solid too. Like not so bumpy on the rough road. But I got another minor sound coming from the dashboard or maybe the aircon. It's more towards the middle part, around aircond that side. Like sometimes it got the "kreee..kreee" sound or going through a bumpy road. I suspect it's something lose. Have you face it before?

I think that was tyre roar la , sound insulation of bezza from my experience quite weird , sometime very good , sometime very bad , anyway as what i can see was bezza has 0 sound insulation , you see engine bay , no a single material on firewall , maybe when good was caused by design of build.

https://content.icarcdn.com/editors/2016/11..._1.3_mt_016.jpg

https://i0.wp.com/klgadgetguy.com/wp-conten...-launch-030.jpg
( saga also same @.@ )

https://www.motortrader.com.my/news/wp-cont...577-650x432.jpg
( new myvi )

https://www.motortrader.com.my/news/proton-...nched/dsc_0111/
( iriz )

maybe A-segment car no need >.<

https://img1.icarcdn.com/4588103/gallery_ne...sm.jpg?smia=xTM
( bezza wheel area )

https://media.karousell.com/media/photos/pr...29_978b50c2.jpg
( myvi wheel area )

http://kereta.info/wp-content/uploads/2014...erior.jpg1.jpeg
( iriz wheel area )

http://www.motortrader.com.my/news/wp-cont...10/PC155048.jpg
( saga wheel area )

How to different or what was different ?
See the colour , if totally same as body colour = no insulation

I am not pro , but this is what i can observe.

For mine , on rough road i press down on top of dashboard from meter cluster area , 1 of the rattling noise gone , if very rough road , plastic sound everywhere >.< , you can try. But minor plastic noise i think cant be avoided. Unless perodua put extra cost to dampen the plastic.

This post has been edited by Goodboy92: Jan 25 2019, 01:07 PM

Actually, paying attention to the door panel where the speaker is installed,
(after a year and a half of owning this car.. Lol)
A thought occurred to me..
it would be nice if car manufacturers could design a bass port into the doors..
After all, it's hollow behind the front panel, right?
Anyway, just food for thought..

All these while listening to Depache Mode, Enjoy the silence.

Yes, old song for old man.. Lol

This post has been edited by jtan.pdr: Jan 27 2019, 08:01 AM

Yes, I think it's like what you said. Just minot noise. But as long as it didn't cause major problem or affecting the car performance then I guess I just let it be.

see budget hehe

yeap.. u r right.. filter for bezza1.3 around 97.40, with labour could be around 120..

57.00 was for bezza1.0


Attached thumbnail(s)

Hi, just about to collect my Bezza 1.3 Adv in these few days, and I was offered a voucher for i-Kool tinted windows, so now I have to make a decision, is i-Kool a good brand? is the original solar and security film provided by Perodua good enough? What's your experience?

it is just a basic (better than none) solar/security tint film..

Bezza factory tint is not really good..
But as spree said, better than non..
My next project is to change the tint to a better one..
Save on ac bill..
Not sure of ikool tho..
Don't know them..

months ago i insurance-claim-replaced my windscreen, and took this chance to replace the tint film to better one as well.. difference is there compare to stock one..

How long have you been waiting?

actually by right the car should come with tinted when u collect?

I suppose they did the tinted film before they send to me, but quite a lot people says it is not very good in blocking heat, so I'll probably change it.


I actually ordered on 7 Jan, but the previous dealer wasn't able to get it for me, until few days ago, I met another dealer, and he manage to book 1 for me on the next day, and I just need to ask the bank to change the dealership, I engaged the new dealer on 28, and this morning I just went to the bank and sign the document, should be able to collect my either today or tomorrow, or latest by Saturday if no issue with JPJ.

The stock one is a security tint, but the heat rejection is really bad. Or perhaps you can keep the original tint and put on a second layer to improve the heat rejection rate?

Hi guys, I've recorded the audio from my Bezza stock speaker (behind) & Sony XS-GT1638F (front) to compare the sound quality.

Stock - https://drive.google.com/open?id=1NaPM1TYVL...eALu0p4ta6FE7TU
Sony - https://drive.google.com/open?id=104tXO9H5T...Rer7gcrViIsEO7C

Stock player:
Treble - 4
Bass - 4
Mid - 2

so much to get
so much to buy
so much to throw away
so little time
cny
lol

consumerism...
not communism...

the jams out there......
its crazy!!!!!!!!!!!
stay cool peeps
stay safe..
or just plain stay home...
heh

solar+security tint films are only at the 4-side windows.. front and back is only solar tint film..

and anything on top of stock's tint film, will void the warranty if anything happens.. so do it at your own risk..

I'll take Security Film over Normal Solar Film anytime. Maybe can replace Front and Rear windscreen to better Solar film if need be.