I see. Then no choice lor.
Maybe really hardware failure

-pWs-

Then what mobo u get?

-pWs-

same one dude..replace with other ultra2-m2
DFI rock!!

bro sempronic....take a look at my signature....
I am using Abit...before dfi...

well what can i say..........abit crap laa

Lanparty is out of budget bro.........but there is nothing wrong also with Ultra2-m2..it is same faster except with diff features.....and im sure Nf4 Ultra is much more matured then nforce5??

hehe dunno..........

ok thanx for the info.

1st try cooler record around 53-54c.
2nd try cooler waiting board to come back to test hehehehehhe

picture uploaded requested by pWs

No la. PhenomFX expensive.
I planning to change to Phenom x4 (Agena)
Not sure though yet. Have to depend on budget

-pWs-

Yea, Brisbane cannot compete with Windsor clock per clock.
The nice thing as u said, the temperature really low and i agree with you.
Windsor are a lot lot more hot than Brisby

-pWs-

sempronic, ur proc got special case.windsor 3.0Ghz is really impressive...  
no need to go for brisbane.unless u manage to oc 3600+ brisbane to 4.0ghz, that's would be better than ur current proc..

brisbane 4.0.. i want it too

~xixo_12~

save your pocket for PhenomX2

yeah, maybe that time price of intels proc drop. but still love to stick to AMD....
but wondering the prformance of phenom vs conroe. have to wait till the proc launched.
however, intel also got new upcoming 45nm process proc ....

forgot to mention bout my rig (mobo = Biostar TA690, =RAM Patriot PC6400 but tried @940Mhz o.k) , PSU=cooler master 430W. Might try pushing it higher but want to stress the cpu more to check stability . One thing was after 2500Mhz had to reduce Ram speed from DDR800 to DDR533 or else could not boot. Tried increasing DDR volt but unable to post. Last time had weird problem when cpu multi was at 10.5x .

bro it can push higher??
i think it will reach limit and u cant get 3ghz rite??

want advise.
higher vcore that can set for brisby?

~xixo_12~

Tested my 4000+ stable until 2900 Mhz with stock Hsf..  3000Mhz is unstable despite upping the vcore... dunno is it due to not burn-in enuf ????  Will experiment with some dram settings....

here's mine

[attachmentid=294760]
32m superpi
[attachmentid=294761]
8hours prime stable..

gonna try lower my ram then push it higher fsb
here my spec:

am2 4000+
biostar TF7050-M2
patriot 1x2gb ddr667
xigmatek S963

he he... nothing wrong. Just incase i need expension that all.. by the way, it is kinda true that i dont fully occupy all the slots.
Yes.. F3.

he's using 330fsb

@arc_archive
nice result u got..hope i can play with higher fsb also soon 

AM2 does not have FSB
AM2's performance solely rely on clockspeed because the memory controller runs at the same speed as the cpu.
High 'fsb' is pretty much useless.

useless?? so try to use high multiplier.. am i rite??

B3 or F3?
hehe, already got it long ago ( if you are saying F3 )
check the OC database
i've submitted my result to the database
http://forum.lowyat.net/topic/321443

Forgive my noobiness, OCing my Biostar 7050 M2, but I can't seem to find the multiplier parameter, does the bios have it?

err........isnt dblooi already talked about his F3 proc many moon ago?
even got screenshot and other stuff too..

but for your info,im searching high and low for f3 proc.for roughly 1month.
Change proc thrice bcoz of frustrated hehehe

F3 doesnt available in Malaysia for low end model...CZbox right now that have F3 proc is above 5200+

u mean cpu multiplier? It's something like CPU VID control in bios if not mistaken.
F3 windsor= CZ . that's for sure.
however, CZ is not godlike, some CZs not good also.
But no matter how bad it is, i think shouldn't be a problem to hit 3GHz
I've bought it in all IT hypermarket, LYP.
There are alot of 5200CZ in LYP when i went there last time,
i just choose 1 of them which i think should be the best stepping available.
My 5200cz not a really good stepping 1, stop at 3.35GHz.
i pumped 1.68vcore in order to get it.
i use water cooling

1.68vcore 

although not godlike but still double kill~ 

but try to use 10.5 la.. don use below,else u want target high HT

brisby 3600...i already tried x9 ...still fail orthos after few min..tried increasing voltage to 1.42V still orthos failed...VFsb to has been increased to 1.3V..still no effect...

thats y i ought to try my luck with x8.5...but still the stable one would be x8..last time try at 2.84Ghz..running orthos 6 hours no prob...