good result bro ....after you worked hard for few hours

So tonight u no need to sleep lah! See you shoot up >3.7GHz tomorrow

3400MHz... i would say this is sweetest spot for me
HT link 1700MHz
ram 566MHz (1133MHz) 4-4-3-3-2T

mobo and ram almost at their limit (for ram it is CL4 limit) .... very meaningful clockspeed
but sadly the Pi result did not up to expectation
wondering why, the previous 3300MHz pi result is very fast

3500MHz , ram change to Cas latency 5 already ( crucial 10th complains that i abuse her )
also change HT multiplier to 4X , TA690G finally cannot tahan haha
result of changing that two ...pi result not following some kinda 'ratio' already....
23.532s, best try from me at this speed

p/s: oh ya..forgot to take note the temperature for previous clock speed, for this 1 it is 49C already

after 3.5G ... feel like wanna stop bcoz of the temp,
but 3.6G is another check point ,
nvm, just give it a try
pump abit vcore more (1.52v)
surprisingly able to boot up~ haha
but the temp oredi 52C
So this would be my last try on air cooler
Pi result now is 22.860s
tomolo will try to go further with watercooler



edited: cpu-Z validation http://valid.x86-secret.com/show_oc.php?id=254257

This post has been edited by dblooi: Oct 14 2007, 05:21 AM

post a pic of my rig....

Xigmatek HDT-S963 really impressive , i nv expect a tiny cooler can brought me to go so far
salute to xigmatek

going to sleep soon
3.7GHz need watercooler..my tiny air cooler cannot tahan adi

nearly to your target super pi already...heheh
22ish is damn good bro..

WOW super cpu

Nice one dblooi.
3.8-3.9GHz is your target Go Go

-pWs-

nice bro...
so wad's the problem tat it lost a minor sec to ur 5200+?
the cache?

a very impressive result i must say,but it's not suitable for daily use or else u will just kill ur F3

come come,give moar!!!!!!!!!!!!!

4GHz is a must

Looking at dblooi's OC result, it's very impressive.
I am very itchy and want to overclock mine as well
But I couldn't get pass 227 x 13 = 2951 and cant even reach 3Ghz
SOS. I have done something wrong I guess....

HTT mutliplier 4x
V core 1.4v
V dimm 2.25v
Chipset V 1.3v

Other setting at stock

Taikos and tailows. Please help me

This post has been edited by ronaldjoe: Oct 14 2007, 11:04 AM

ha...then faster come and joint the club!

Noted yr signature that yours is CZ too...
bro db, does this 5200CZ also another germs like 3800CZ?

should be caused by the L2 cache....
and i suspect the gap actually is even wider...
bcoz my result on 5200+ is not max tweak yet
too bad oredi sell it to davidletterboyz , cannot do experiment liao

nope, that 5200CZ is CCB6F, not that overclockable

edited: i din notice that u are saying ronaoldjoe's 5200CZ...it's depend on the stepping actually...if it's CCB8f, most probably it is a good 1

This post has been edited by dblooi: Oct 14 2007, 02:32 PM

oww...
so bad...
sold so fast...

pump vcore to 1.475v sure u can reach 3ghz...

Drop the HTT multi to 3x

ha bro,

So many sifus teach you how to fine tune already, hope that you may gasak it kaw-kaw....
I pumped 1.55V to my current brisby and it still alive, just make sure the temp not shooting too high (mine below 55C)

As for the dual-link cable I can't help you much cos I don't have 1 on hand to test

This post has been edited by ongbs: Oct 14 2007, 07:22 PM

I don't pump so high as I saw our dblooi taiko only set 1.35 - 1.4 to reach 3.2Ghz

Now is 226 x 4 = 904.
Still need to drop further?

Current temp is around 40C for core 1 & 2 @ 1.4V
Anyway, bro. I am really grateful for the assistance on dual link DVI
I hope I could get one soon

This post has been edited by ronaldjoe: Oct 14 2007, 11:18 PM