is there no other way to flash the bios or anything?
it sucks man.. i spend 600 for this mobo

TF6100 for RM600? TF6100 nvr been that expensive at all...

EDIT: read wrongly...it's 590sli haha. OK, check ur mobo manual, u can do 2.2V with jumper....check it. BIOS won't able to push it beyond 2.1V.

This post has been edited by davidletterboyz: Oct 7 2007, 08:01 PM

yup...but only 2.2...not more than tht eh?

maybe vmod will do...
try to google around and see
but in my case, after vmod still cannot OC high on my TF6100

there is definately a limit to a budget board.. nonetheless, its still a great bang for buck.

**Off Topic
Guys, anyone here plays "Lost Planet : Extreme Conditions"? Formatted my rig today... and stupid me i forgot to backup this particular gamesave

it would be great if anyone can help me by sharing with me your game save.. im currently on level 7..

wah..totally out of topic.. why not u try searching at gamer section.. xjumpa ker..

please keep in the right topic....

if not soulfly would be mad....

This post has been edited by sempronic: Oct 7 2007, 08:48 PM

long time nv see mod's replies.
retired from am2 oc field already?

dont say like that.. i think he looking sumone before open V3.. dun think he want retired

maybe he to busy....

poor soulfly....

from V1...

now already V3 coming....

who gonna replace him??

isn't sempronic u wanan replace soufly in V3??

its an abit kn9 ultra leh

vcore can go to voltages that you probably wont use unless you on cascade or LN2

vdimm is abit satisfactory with increments of 0.5v till 2.0v then it goes to 2.1, 2.2, 2.3

only thing i dont like about is that when you enable the nforce tcp optimization and those stuff related to the LAN, it gives me bsod :S and that drivers from nvidia cant really work with the board except those from abit

thanx for the reply...

thats a good voltage..on my old kn9-ultra i got like 2.6g@1.45v orthos stable..
but in new mobo...have to give 1.5v to get the same setting as kn9-ultra....

---

Added on October 7, 2007, 10:05 pmOh....i didnt use it...Alla over the world people advise againts using NAM..which is needed to get the tcp optimization...
bsod n stuff..a failed features from nvidia..

This post has been edited by CV6149: Oct 7 2007, 10:05 PM

I think possible due to the fixed unchanged Max Asynchronous Latency [5ns].
Try to use looser MAL by using modded bios. I think you can get back 1.45v stable which you use for ur last motherboard.

-pWs-

This post has been edited by -pWs-: Oct 7 2007, 10:09 PM

yeah did that bro...
now using the 7.8_9 bios..

last time with abit..is 3.9 not sure th MAL value..forgot..

This post has been edited by CV6149: Oct 7 2007, 10:40 PM

I see.
Maybe DFI requirement more high

-pWs-

Yeah....maybe..seems like dfi voltage requirement is usually higher to boot and its usually orthos stable also.
the abit..even though use lower volt to boot..but when orthos..its is not stable and end up use similar voltage also...

level 7?i can give u mine.. but ive finished it..still want?

ooppsss sori...off topic

This post has been edited by alive88: Oct 8 2007, 12:36 AM

well here is my score for dblooi super Pi game.

2700 x 31.46=84942




This post has been edited by CV6149: Oct 8 2007, 09:14 AM

bro, how far your 4200+ can go?