Its a unit of friend of my friend, which we didnt finalise bout price yet, as wanna see if suitable first or not.
But ball park they should cost around 1k plus minus depending on conditions..

https://bikerumor.com/2016/08/12/tech-story...h-best-results/

25mm is fine

This post has been edited by miaopurr: Aug 3 2018, 12:11 PM

Thx for the great article..Miaopurr

Cat, I think u are more welcomed in the Lycran world la, ditch the fake bike, come back full time to the Lycran world miaopurr

AC 420 Aero 3 is a great wheels. Used them for 3 years and bomb proof. Very light for an alu wheelset

Any problem servicing them or parts..since Ac has closed down.
Does the hubs easily serviceable by LBS?

Never changed part before. Serviced it with H2C Ampang, the same place where i got it. It was about 6 years ago when I have it, so... it was still ok. Not sure about now though.

Have u tried with wider 25mm tires, and does it looks very balloon or lightbulb as they called it?
Probably 6 years ago, there wasnt 25mm or not popular.

From Miaopurr article, i know now it can fit and works on the narrow inner bed.

what has gotten into you? u ok? suddenly offer truce dgn kuceng. u admit defeat eh? that's okay... i understand what u going thru....

fwiw, i'm on 15c rims, 25mm tyres. look n ride okay

This post has been edited by miaopurr: Aug 3 2018, 02:50 PM

Another advice needed,

Shall i be still looking at these older gen alloys, or shall i go for new cheap Carbons below Rm2k range ...like those from Prolites, SuperTeam. and etc.

At that price point i would definitely get an alu wheel!

I have 28cs on a 17c rim and it's all good!

This post has been edited by Calvin Seak: Aug 3 2018, 03:51 PM

I have a pair of 50mm superteam and I think they're good.

alloy

Get a zonda. Not only you'll have a great alu wheel, its pretty light for its price plus you'd still have some change with that budget

truce.....

Getting carbon wheel at that price point will end up with cheap hubs with bearing breaking after a year (two of my cycling bud's superteam just changed bearing).
Even with carbon they don't weight light either, 1.7+1.8kg for carbon wheel? Rm2k can get u good alloy at the same or lighter weight with better hubs! And reliable braking.

A lot of time we get blinded by price point and dump reliability aside.

Surprisingly, HUNT (uk) also falls into the "cheap china" wheel catagory after I inspect my friend hunt, it's build with Taiwan cheap parts! His bearing and freehub pawl(suspect novatec) a bit worn off after 400km only. I felt he was dupe by HUNT.

Guys,

To gain more stamina or endurance as well as lose weight, is it better for me to cycling on trainer with HR beat consistenly at 160bpm or do burst like train a few minutes at 180bps or so then cool down to 120-130bps and do burst again?

kayuh on the road for hours.