i just set 2.4ghz to auto mode and enable 40mhz..find non overlap channel..like channel 1


Also wireless>professional>region> All Area

My area sucks.


Attached thumbnail(s)

40Mhz on 2.4GHz is not actually recommended. You should stick with 5GHz.

I did set both on All area but I noticed when my 5Ghz signal is weak it wont auto switch to 2.4Ghz.
Need to turn on Smart Connect only can auto switch, but if turn on smart connect, cant set much for channel bandwidth and wifi channel.

Will teach you a life hack. Set both SSID on 2.4GHz, and 5GHz, to be identical to each other, and your devices will connect to the strongest signal available, and disconnect from weakest signal. Done.

Wow, thanks man. Initially thought cannot set same name for both frequency.

Haha, no worries. Enjoy.

Need your help bro. After setting up tenda ac18 and connected, it says no internet. What should I do?

hi bro, which firmware u using rn?

straight out of the box... did not note down the firmware. have set back to my old modem again
just got the unit from ookas

This post has been edited by ceras: Sep 8 2018, 07:43 PM

firmware version?

will have to set it up again to get the firmware version.....get back to you later

Firmware ver v15.03.3.11_multi

Firmware ver v15.03.3.11_multi
Although wifi connected it says no internet, secured

This post has been edited by ceras: Sep 8 2018, 08:18 PM

do you choice Unifi / Maxis / Normal Mode ?

Originally chose unifi mode but after reset did not notice this choice reappearing again

This post has been edited by ceras: Sep 8 2018, 09:28 PM

no this option ?

any ac18 user upgrade to 800mpbs ??
i want flash my fiemware to merlin
but worry after firmware change, wifi speed drop
because merlin is not design for AC18

Still waiting to get turbo upgrade tho. Wifi I heard only can support 300-500mbps~ on 5Ghz

Bro, 3-500mpbs You mean ac18 stock or merlin ?