After turning off the tv box, it works like charm...out of nowhere Thanks.

However, if oneday hypptv support 4k hdr streaming, itll be lag as hell, haha since my ciplak homeplug only up to 200Mbps.
Btw, does hypptv content come in 1080p resolution? Also, what is the LAN max speed of huawei ec6105v5?

4K = unlikely. The box only supports up to L4.1 for H264.

Some Hypptv contents come with 1080i. No idea why content providers choose interlacing.
The box supports 1080p output.

Unsure about LAN speed for silver ec6105v5, but the latest white box decoder only has 10/100Mbps port.

Haha, it sucks then, the white box LAN speed, and etc

Hey there, I got a quick question. It is possible to connect the HyppTV through the bridged router VLAN port?

My Current Setup:
Main router - D-Link DIR-895L AC5300 *Second Floor
Bridged router (Using WDS via 5 Ghz) - TP-Link C1200 (C1200v1_eu-up-1.1.3 Build 20180502) *First Floor

U try it out yourself 1st, then only report here, haha.

Rule of thumb of slave routers[AP or Repeater]
1) Switch off the dhcp and also
2) dont dial pppoe, turn off if any,
3) then select bridge/AP/wds mode if any

*2 & 3 u usually dont have to configure separately, they work in triggger fashion, activate 2) pppoe and 3) will be disabled automatically vice versa.

Hey, I've already did all the steps you suggested, but still no luck on setting up. Other than powerline / homeplug adapter, I think connecting the router B to the main router's vlan via RJ45, then connect the HyppTV to the WiFi of the router B should work, but that will required too many routers to start with.

This wont work either, ive tried. Powerline it is.

I have Archer C1200 v1.0, which firmware version do support unifi 500mbps ?

All of the firmware support 500Mbps via cable as long as NAT Boost is enabled.

Thanks a lot.

Hi. I have just received my free C1200 from TIME this morning.
Anyone able to WDS bridging via 5GHz?
After flashing EU, can flash back to TIME firmware?

Thanks.

Yeah.. I've tried that too. No luck, have to buy powerline
Anyway, thanks a lot for the heads up

When u wds 2 routers, did u conduct the "test network connection"? Which steps out of 7 failed? Maybe we can reverse engineer from there..

Page 29 for WDS.

Yes, can flash back. Page 1.

Thanks for the info.

Can set 5GHz to Auto?

Thanks.

Don't.
Stick with Channel 36.

Thanks bro.

Which one is more better?
36 or 48?

I don't have 5GHz phone to test which channel is the best.

Thanks.

The lower, the better.

Will try it out.
Flash the firmware from EDIT7 on page 1?

Thanks.

Yes.