AMD Ryzen/ Threadripper OverClocking V1, Show off your OC results here!
|
|
 Sep 15 2017, 10:32 PM
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
QUOTE(owikh84 @ Sep 15 2017, 09:19 PM) Your wish is granted! MSI B350 TOMAHAWK now received AGESA Code 1.0.0.6b update. Omg omg omg omg omg omg!!!!!!!!!!! Download it here: https://www.msi.com/Motherboard/support/B35...AHAWK#down-bios Enjoy!  Thx bro...  |
|
|
|
|
|
Sep 19 2017, 11:49 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
finally see some light at d end of d tunnel... thou it's 2T again...
 
|
|
|
Sep 20 2017, 12:02 PM
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan 
|
QUOTE(ah_khoo @ Sep 19 2017, 11:49 PM) finally see some light at d end of d tunnel... thou it's 2T again... Don't give up, keep trying. On my side of story, 3466 is hell not easy to get stability, even with 2T, loosen timings and excessive voltages. Tested both Samsung B-die-based TridentZ RGB 4266 and Vengeance RGB 3466. 3333 CL14 1T is stable Hyper Pi, 3466 CL14/CL15 failed this test but passed Super Pi. TridentZ RGB 4266 @ 3333 MHz 14-14-14-28-1T @ 1.43v VDIMM and 1.2125v vSOC: 
TridentZ RGB 4266 @ 3466 MHz 15-15-15-35-1T @ 1.41v VDIMM and 1.20v vSOC: 
TridentZ RGB 4266 @ 3466 MHz 14-14-14-28-1T @ 1.43v VDIMM and 1.2125v vSOC: 
|
|
|
Sep 20 2017, 02:13 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(owikh84 @ Sep 20 2017, 12:02 PM) Don't give up, keep trying. thx for d encouraging words bro, now with your templates, it's easier to achieve at least hp32m stable. when 32m failed it really means d basic stability (for 24/7) isn't there, lotsa works to be done. got a feeling b4 this 1.45v is needed, so what i felt was rite.... On my side of story, 3466 is hell not easy to get stability, even with 2T, loosen timings and excessive voltages. Tested both Samsung B-die-based TridentZ RGB 4266 and Vengeance RGB 3466. 3333 CL14 1T is stable Hyper Pi, 3466 CL14/CL15 failed this test but passed Super Pi. TridentZ RGB 4266 @ 3333 MHz 14-14-14-28-1T @ 1.43v VDIMM and 1.2125v vSOC:
TridentZ RGB 4266 @ 3466 MHz 15-15-15-35-1T @ 1.41v VDIMM and 1.20v vSOC:
TridentZ RGB 4266 @ 3466 MHz 14-14-14-28-1T @ 1.43v VDIMM and 1.2125v vSOC:
 again impressive job as always bro...  This post has been edited by ah_khoo: Sep 20 2017, 02:14 PM |
|
|
Sep 20 2017, 10:42 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ah_khoo @ Sep 20 2017, 02:13 PM) thx for d encouraging words bro, now with your templates, it's easier to achieve at least hp32m stable. when 32m failed it really means d basic stability (for 24/7) isn't there, lotsa works to be done. got a feeling b4 this 1.45v is needed, so what i felt was rite.... Samsung B-die scales well with voltage bro, moreover you dial 1.9v also it's not gonna kill your RAM. again impressive job as always bro... Btw, things would get a lot easier if ASUS put some preset RAM OC profiles like they did on the C6H. This C6E seriously needs a BIOS update, damn lots of bugs.  
|
|
|
Sep 21 2017, 09:22 PM
|
 
Forum Admin
44,415 posts Joined: Jan 2003  
|
So you're running 4Ghz++ RAM at 3.x Ghz already still no stability?
|
|
|
|
|
|
Sep 22 2017, 10:00 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
Is there any huge diff in mileage for sc vs dc in intel? Tested last nite @ sc 3466 rgb managed to boot up until 3733 @ 1t, stock timing. But @ dc, max still 3466 only.
|
|
|
Sep 22 2017, 01:43 PM
Show posts by this member only | IPv6 | Post
#108
|
 
Junior Member
18 posts Joined: May 2014
|
Hello need some help 😂
https://rog.asus.com/forum/showthread.php?9...osshair-VI-HERO I followed this guideline to oc my R5 1600, now cannot post. Stuck at white vga led . My spec: R5 1600 Strix b350 ( bios 0809) Corsair lpx 4x2 gb 3000 c15 Gtx 1060 My simptom: No post No display Already tried clear cmos (remove battery, shorting jumper) still the same Already change ram position Tried to reseating the hardware still the same Tried to boot bios from pendrive still no display Whereas everything worked correctly b4, after follow that allegedly stable oc profile now cannot post. Is my mobo bricked ??😭😭 |
|
|
Sep 22 2017, 01:57 PM
|
Senior Member
588 posts Joined: Jan 2003 From: Penang | Puchong | Malacca
|
QUOTE(ultimatumheavenus @ Sep 22 2017, 01:43 PM) https://rog.asus.com/forum/showthread.php?9...osshair-VI-HERO First of all.. you following a guide made for Crosshair VI Hero motherboard whereas your own board is Strix B350. In most cases should still be fine tho, just that it would have been a little bit more wise to search for OC guides done on Strix B350..Whereas everything worked correctly b4, after follow that allegedly stable oc profile now cannot post. Is my mobo bricked ??😭😭 "USE THIS PROFILE AT YOUR OWN RISK, VERIFIED STABLE WITH P95, CPU BURNER AND MANY OTHER BENCHMARKING PROGRAMS- CURRENTLY A WATERCOOLED SYSTEM. WAS STABLE WITH GOOD AFTERMARKET AIR COOLER" Did you heed his warning? What cooler did you use? And finally, there are only TWO replies to that thread without any confirmation from anybody else if it worked for them. Can't say I see anything really alarming on his recommended settings, except for a shitload of things left on Auto. I prefer to manual set CPU core voltage (vcore). Wait for the experts to chime in on this. » Click to show Spoiler - click again to hide... « This post has been edited by raydenex: Sep 22 2017, 02:00 PM |
|
|
Sep 22 2017, 02:04 PM
Show posts by this member only | IPv6 | Post
#110
|
|
Junior Member
18 posts Joined: May 2014
|
I managed to hit 4ghz before (x40 multiplier) but doesn't stable, so im trying looking around for guides. But that pstate change is very shady, with warning like that.
|
|
|
Sep 22 2017, 02:16 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ultimatumheavenus @ Sep 22 2017, 01:43 PM) Hello need some help 😂 AFAIK VGA white LED means your monitor is not detected by the motherboard.https://rog.asus.com/forum/showthread.php?9...osshair-VI-HERO I followed this guideline to oc my R5 1600, now cannot post. Stuck at white vga led . My spec: R5 1600 Strix b350 ( bios 0809) Corsair lpx 4x2 gb 3000 c15 Gtx 1060 My simptom: No post No display Already tried clear cmos (remove battery, shorting jumper) still the same Already change ram position Tried to reseating the hardware still the same Tried to boot bios from pendrive still no display Whereas everything worked correctly b4, after follow that allegedly stable oc profile now cannot post. Is my mobo bricked ??😭😭 Try using other display output (DP/HDMI/DVI) at the back of your graphics card, also check the cable connection to your monitor. |
|
|
Sep 22 2017, 02:46 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(goldfries @ Sep 21 2017, 09:22 PM) So you're running 4Ghz++ RAM at 3.x Ghz already still no stability? There is, check my HCl MemTest and HyperPi results in previous posts. These are stable OC for 24/7. What I am not happy now is that my Ryzen 7 1700 seems to have a weak IMC, resulting in high RAM and SOC voltages required. Also, the C6E board won't give me the desired voltage value that I set in UEFI, always end up with lower readings.  QUOTE(ah_khoo @ Sep 22 2017, 10:00 AM) Is there any huge diff in mileage for sc vs dc in intel? Tested last nite @ sc 3466 rgb managed to boot up until 3733 @ 1t, stock timing. But @ dc, max still 3466 only. Single- vs Dual-channel RAM, actually in real world not much different in terms of performance.But most of the time all advantages point towards using Dual channel. https://www.gamersnexus.net/guides/1349-ram...-channel/Page-3 |
|
|
Sep 22 2017, 04:07 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(owikh84 @ Sep 22 2017, 02:46 PM) Single- vs Dual-channel RAM, actually in real world not much different in terms of performance. Thx for d heads up bro. How bout mileage wise? Performance is d lesser concern. What surprised me was d diff in mileage was huge. Single stick managed to boot at 3733 w/o sweat, at 1T. I will try lower volt for vdimm n vsoc @ single stick tonite, got a feelin d voltage wont be so crazy like what needed to do dc, say 3466 @ 2T.But most of the time all advantages point towards using Dual channel. https://www.gamersnexus.net/guides/1349-ram...-channel/Page-3 Tested single stick @ dimm 0-3, all managed to boot @ 3733 1T bar dimm3 (one of d dimm for channel a which recommended for best mileage). At dc now 2t really d only d way to go if i was to run high frequency. This post has been edited by ah_khoo: Sep 22 2017, 04:09 PM |
|
|
|
|
|
Sep 22 2017, 04:33 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ah_khoo @ Sep 22 2017, 04:07 PM) Thx for d heads up bro. How bout mileage wise? Performance is d lesser concern. What surprised me was d diff in mileage was huge. Single stick managed to boot at 3733 w/o sweat, at 1T. I will try lower volt for vdimm n vsoc @ single stick tonite, got a feelin d voltage wont be so crazy like what needed to do dc, say 3466 @ 2T. Single channel OC easier and higher than dual channel, of course.Tested single stick @ dimm 0-3, all managed to boot @ 3733 1T bar dimm3 (one of d dimm for channel a which recommended for best mileage). At dc now 2t really d only d way to go if i was to run high frequency. But TBH I seldom playing with Single-channel, usually only do this when I want to find which module is clocking better or bad one. I have seen 7740X x299 results, Dual-channel maxes out at DDR4-4400MHz, Single-channel 4800MHz max. |
|
|
Sep 22 2017, 05:07 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
Finally, we have a new BIOS for C6E silently appeared out of nowhere.
Will definitely give it a try tonight, hopefully can solve issues/bugs that I have been facing since quite awhile ago. https://rog.asus.com/forum/showthread.php?9...ll=1#post675997 QUOTE I sent a mail to ASUS, they replied and were acting like I'm a noob, sent an angry reply back, they sent me a BETA BIOS for C6H, and then finally, I got a BETA BIOS for C6E. They also posted this in a German forum, link: https://www.hardwareluxx.de/community/f248/...me-1176050.html Direct download link: https://www.file-upload.net/download-127178...US-1602.7z.html It actually fixed some of my issues. Especially when applying a multiplier higher than 37. Also a lot more options for overclocking. No bugs so far. This post has been edited by owikh84: Sep 22 2017, 05:08 PM |
|
|
Sep 22 2017, 05:16 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
Key is = to show angry...
|
|
|
Sep 22 2017, 08:32 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ah_khoo @ Sep 22 2017, 05:16 PM) Key is = to show angry... Imagine struggling with numerous BIOS-related bugs for 3 months without a single BIOS update. Being one of Crosshair VI Extreme owner, I actually understand their frustrations. Furthermore, it's their flagship and the most expensive X370 board so end users are expecting to get a better treatment of course. Anyway, it might not even be ASUS's fault. The thing is AMD wants consumers to be their beta testers for their new platform.  |
|
|
Sep 22 2017, 11:45 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(owikh84 @ Sep 22 2017, 08:32 PM) Imagine struggling with numerous BIOS-related bugs for 3 months without a single BIOS update. kinda agree to some extent bro, it's like launchin half baked product (especially ram compatibility related issue). good thing is, if agesa is improvin from 1 version to another, at least consumers can feel d improvement. unlike intel, right from d start givin all already, then nothing more to expect unless one upgradin to X platform. Being one of Crosshair VI Extreme owner, I actually understand their frustrations. Furthermore, it's their flagship and the most expensive X370 board so end users are expecting to get a better treatment of course. Anyway, it might not even be ASUS's fault. The thing is AMD wants consumers to be their beta testers for their new platform. btw, 3733MHz @ single stick still requires 1.45v to be benchable, i had a sad... 
This post has been edited by ah_khoo: Sep 23 2017, 12:28 AM |
|
|
Sep 23 2017, 12:46 AM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ah_khoo @ Sep 22 2017, 11:45 PM) btw, 3733MHz @ single stick still requires 1.45v to be benchable, i had a sad... Nice one bro.  Can the other RAM stick do the same OC as well? |
|
|
Sep 23 2017, 12:59 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(owikh84 @ Sep 23 2017, 12:46 AM) Nice one bro. Its a no brainer oc bro, load ezoc 3733 then pump vdimm as simple as that. Tested yesterday both sticks behaved d same, last dimm (furthest from cpu socket) both also kenot boot @ 3200 n above. Thing is if put more than 1 sticks then gg liao... Can the other RAM stick do the same OC as well? |
|
Topic ClosedOptions
|
| Change to: |  0.0263sec
 0.61
 6 queries
 GZIP Disabled
Time is now: 1st December 2025 - 12:19 AM |
Quote