yeah..i found it. it at the ppage48-50
well...
may i know can my router connect with p1i cause i only see route-g at it(my router is belkin) and how to set it to b+g if can ?

thx

This post has been edited by tjwong: Nov 25 2007, 02:08 AM

see the specs first...most of the time the router supports b n g....go into ur setting page (usually web-based, refer to the manual) look for wireless setting (like my level one it point to access point setup) and look for b+g

[quote=aliex87,Nov 25 2007, 02:12 AM]
see the specs first...most of the time the router supports b n g....go into ur setting page (usually web-based, refer to the manual) look for wireless setting (like my level one it point to access point setup) and look for b+g

[/quote

ic... thx alot.. although i still dont know how to change the setting. but i check the router box written compatible with b~ so hapi

[quote=tjwong,Nov 25 2007, 02:46 AM]
[quote=aliex87,Nov 25 2007, 02:12 AM]
see the specs first...most of the time the router supports b n g....go into ur setting page (usually web-based, refer to the manual) look for wireless setting (like my level one it point to access point setup) and look for b+g

[/quote

ic... thx alot.. although i still dont know how to change the setting. but i check the router box written compatible with b~ so hapi

[/quote]



enjoy!

look, what i've found in china's microsoft mobile site while downloading their official MSN Live beta for mobile...

flashing firmware problem:

I'm using XS++2.2 (also 3.1 on my few other tries)

I conected my phone, open XS++, tick smartphone connect, then connect, here's what appeared:-
XS++v 2.2 Ready!
Executed on Microsoft Windows Vista
Exectuing SEMC Smartphone Operations!
Please hold boot key ('@' or 'c") and connect device...
Master Port Detected: COM5
Slave Port Detected: COM6
Opening Port!
Init Master...FAILED

It keeps repeating the same no matter how many times I tried, my cda is 162024/95 R5A, it doesn;t appear in the CDA list, does it compatible with XS++?

Please help

If those always travel, some country yet not support 3G.

Then will get bog problem when came to data access ...

did you hold on to the c button when connecting to your dock/USB cable?

i m also using belkin g router at home...connect with p1i flawlessly...
just enable ur router for b / g mode...simple...

i wonder what are you guys gonna do with the G band wifi?
is there any apps that really gonna extensively abuse the 11mbps limit of wifi B that 54mbps of wifi G has to come to rescue?
anyway, i found the missing of flash support is much more annoying than the missing of wifi G

second that... how could a smartphone miss out Flash Lite while normal w-Series also come with it

Want to ask. is there any where to see pics taken by P1?
i hear there's a blue tint on pics, is it true?

Main Menu > Multimedia > Picture Gallery > (Select ur memory stick if u save ur photo to memory stick)

blue tint issue i think the latest firmware already fixed it?

green tint on top right hand corner to be exact.
it is a sensor fault. firmware update reduce it but somehow it still exist

oh, yeah, notice it in my unit aswell... very small portion... should i just get it fixed or leave it?

anyway do ur batt can be full charge like 100%?
everytime i leave my it charging with power adapter unit, it seem like maximum to 98% only eventhou i leave it for 3hours

can p1i like w810,w800i can use torchlight?

[img=http://img138.imageshack.us/img138/6571/dsc00025bi4.th.jpg]

green tint like what u guys been mention bout

Oh no, i meant, pics taken by P1. is there any website we can see sample pics

No i didn't. I connect my phone via cable, then i open XS++, I tick smart phone and press connect without pressing C. I tot I only need to press the C when I on the phone after:- disconnected the cable ,reinsert the battery & reconnect the cable?

ya... mine got that problem... u can see my previous post like what fx_53_xt mention bout