So I finally got cable management done yesterday, some comments on what to improve is welcomed.

actually if i building a new rig can i use my old power supply SS620GB (6 years old) or recommend to buy new power supply?

hi guys.. i need some help to plan my build. it is as listed above

[Budget] as tight as possible but not too cheap out xD

[Purpose] e-sports title

[Hardwares that will be re-use] none

[Monitor resolution] 1080p

[Games & softwares that use frequently] as mentioned above

[Personal preferences]
just going for ryzen 2200g (is it worth to go 3200g/2400g/3400g) for APU build

for case, target for high airflow case like silverstone or cm q300l

board need help choose from asrock b450m pro4/steel series or giga ds3h or any deemed suitable (mayb i guys could help rate which is better to worse)

ram 8gb x 1 stick for now.. preferably 3000mhz ++ with low latency (cheap but still good for oc')

psu = cheap 80+ rated with enough power for oc'

storage =  cheap performance single ssd for starter

cpu cooler = should i used aftermarket rather than stock wraith stealth since i will oc some if not all? looking at cm masterair ma620p rite now (btw im all for air cooling.. not a fan for aio)

im not tryin to be stingy, but it is my dream to own a pc.. i got a job now but definitely not sufficient enough to buy it all in one go. probably gonna buy by parts..

thanks guy

aorus x570 many rma i kena... tat y dun dare recommend.. 3 case out of 7 i sold

ryzen 3800x worthless in gaming.. but when rendering u can feel the different.. dint set up of 2 pc at advertising firm.. 1 3700x n 1 3800x.. the 3800x render AI file the speed can par with TR 2950x while 3700x not where close..

need help guys.. while building my new htpc encountered this issue where the gpu fits but the power connectors 6x and 8x pin protruding hence cannot close the top casing

is there any type of adapter that could fix this issue? I don't want to buy a new gpu 

* in pic below shows the blocking issue due to the plastic piece highlighted in red arrow

This might help flat 180 degree Link

What's wrong with that a400?
That sx8200 for Windows and software.
A400 for storing purpose

Please recommend me good power supply then.

can you recommend something cheap for 128gb?

oh God I was hoping it was a budget dram SSD 😅

I'll still choose a power supply base on my system requirement..
as 600w till 650w is the gap and no more than that..
Enermax revobron 600
Corsair cx650m
Tq, for contributing to the 'rig suggestion' for so long period
I did my IT course, at APIIT back in year 2001
cheers, mate..

Depends.  My Seasonic unit has failed twice and only the PSU is affected - other parts are all OK

Also explains why you should never skimp on the PSU

looking to build a new rig.

saw this ram prices.
https://shopee.com.my/HyperX-Predator-RGB-8...6892.4912218564

good or too good

Any good recommendation for B450 MOBO?

Where can you get a 2600 for RM499

Thanks!

Some questions:
1. Is 8gb RAM enough for my use? Can a m-ITX fit 2 Ram sticks if i wish to upgrade later?
2. What do you suggest for the next level up for the CPU?

thanks! a friend commented that the graphics card GT710 is quite low spec. Is the graphics card not relevant for 3d modelling use?

Bro, adobe software is not really demanding but sketch up, revit , 3d max , vray those eat all cpu, GPU n ram...oso ECC ram.. i guess many of us dunno it is important for professional work nowadays

1600AF is literally r5 2600 (if compare both with OC) and goddam cheaper alot as well.
i dont think asia will bring in, so far like only NA and few EU region got it.