Hi Sifu

Need recommendation for a PC

[Budget] 6K++ with Monitor and keyboard/mouse combo

[Purpose] Gaming

[Hardwares that will be re-use] None

[Monitor resolution] IPS 1440p

[Games & softwares that use frequently] Moba, PoE2, WoW, Starcraft2 (mostly blizzard games)

[Personal preferences] Hopefullty 1440p Gaming.
I was quoted the build below recently at about RM6230.

Is the below spec ok or is there anyhere I can save/improved the built?

CPU : AMD Ryzen 5 7600
Mobo : Asrock B650M PG Lightning WiFi
RAM : G.Skill Ripjaws M5 Neo RGB 32GB (2x16GB) DDR5 6000
Cooler : Thermalright Peerless Assassin 120 CPU Air Cooler
GPU : Gigabyte AMD Radeon RX 7800 XT 16GB Gaming OC
SSD : Kingston NV3 1TB M.2 2280 NVMe Gen4 SSD
PSU : MSI MAG A850GL PCIE5 850W Power Supply
CASE : Thermalright Peerless Assassin 120 CPU Air Cooler
Monitor : Philips 27E2N1500 Monitor (27", 2560x1440, IPS, 120Hz, 1ms)
Keyboard/mouse combo : HyperX Alloy Core RGB Gaming Keyboard + Pulsefire Core Gaming Mouse

Thanks in Advance

Currently still using a B550 motherboard some budget MSI mobo, with a Ryzen 5600G processor, because I didn't had budget for a graphic card at that time (5600G proc comes with integrated graphic card).

Now using a RTX4070 Super 12GB Vram, paired with 16GB RAM.

1440p monitor 144Hz.

Getting around 80-100FPS on mostly high settings with RTX turned up to Ultra, with DLSS Quality.

Not sure if this is considered good, or should i consider upgrading the processor to something like 5700X3D?

Refer to processor official spec. 7500F is 5200. Anything above is considered as overclocking and have unstable risk. You could still run 6000 stick at 5200, but you wasted extra money.

Yes, around 6000-6400Mhz as the max you can tune is  6200Mhz w/o downstep IF 2:1. Its pricier due to tighter binning from factory and you can see clear results



At 6000MHZ there is not much headroom on RAM speedup for AM5 hence why to get better perf only way is down timing CL rating.

Of course nearly all 6000Mhz kits are the same in using Hynix A die (or sometimes M die) so you could save a bit going CL40 kit and downtiming to CL30 but theres higher chance it will fail.

Anything 6000mhz cl30 it's good.. 6000mhz cl32 above u mind as well use ddr4...or go 5600mhz jedec.. u use r5 or i5 n ddr5.. u r baited

i5 with ddr5 or ryzen 5 with ddr5.. generally slower.. coz the ram operate at gear 2 or gear 3 ratio

There will be outliers, like XMP, wont automatically work without issue for everyone but afaik I havent heard of EXPO/XMP failing at thereabouts 6000+.
Now its actually base XMP as not far off from highest JEDEC 5200 and while max XMP with cudimms looking at 12000MHZ! What is 6000MHZ boost.

Your CPU IMC has to be real shitass if cant do a mild bump to 6000 and even if you fail there are plenty guides how to make it work (ref: buildzoid)

I have a budget of 3.5K as well, change mb+wifi and reduced ram and case.
AMD Ryzen 7500F - 579 (Viewnet, must bundle with motherboard)
MSI B650M GAMING WIFI - 571 (Shopee)
Kingston Fury Beast 8GB DDR5-4800 X2 - 248 (Shopee)
Asrock B580 12GB Challenger - 1379 (Shopee)
Kingston KC3000 1TB - 349 (Viewnet)
MSI A650BN - 203 (Shopee)
Tecware Neo M2 - 135 (Shopee)

RM3464 total

Looks good?

I've upgraded to 5700x, now looking for GPU (new and used unit), have few options on my list, which suits the best?

New:
1. RTX 5060 Ti 16GB
2. RX 9060 XT 16GB

Used:
1. RX 6700 XT 12GB
2. RX 6800 XT 16GB
3. RTX 4060 Ti 16GB

Thank you for your recommendation 

Think I read sun cycle distribute punya quite good rma