By buying 2 units under 1 order, shipping cost increases from $16.08 to $21.77. But this will definitely give rise to GST imputation when the barang arrives, which will be more than the savings on shipping. On a per unit basis, there's a high chance a single unit will not be subjected to GST since the value will be under RM1k. USD exchange rate will have to go beyond RM4.62.

Ello guys. Reporting in with the Corsair K70 (mx blues), Ajazz AK33 (Zorro Blues) and the old Razer Blackwidow (MX Blues)

nice camera

Hi all, need help. I bought a HHKB from eBay Japan and the seller said due to the price, will kena custom. Is it when the keyboard arrived, I have to settle the fee at my location pos laju?

hi guys, anyone know where can i get 87keys keyboard dust cover? prefer acrylic.

Hi all , I have one cm storm rapid- i , now thinking to get another tkl keyboard
Is Varmilo va87m a good buy ?

The Varmilo VA87M is very solidly built, with floating key design

I have saw a review complaining about the ping of tactile switch on this keyboard . Can I know what is the ping he described about ?? thank you

review link : https://www.reddit.com/r/MechanicalKeyboard...ateron_brown_a/

This post has been edited by LeonWong24: May 30 2017, 12:03 PM

Hi guys, any customizeable standard keycap mkb with red switch? Budget not high. Prefer to have mkb that keycap can change and it is standard one.

I did not experience any "ping" on my unit with MX clear switches or at least none that my peasant ears could detect

China <-- click me

The feel of the Vortex PBT keycaps most probably better than the Ducky floating ones...however, QC on the Vortex PBT keycaps is quite bad. I had an opportunity to go through several units of the Vortex PBT caps, almost all of them had the stems showing through. The degree of the stem's visibility varies according to the lighting conditions, and also on manufacturing variability too I guess as some had really visible stems while others not so much. After checking around 15 units of the caps, I gave up and decided to forego buying them. So...caveat emptor.

It might be different for your case but a few years ago I kene tax by kastam on an item I bought from the US via ebay. I had to go to Pos Malaysia at KLIA to pay the tax & then pick up the item. Again, YMMV.

off topic

is it oke to lube switches with white lithium grease?

i tried lubing the stabs, nyum nyum

Ah, I was just about write on this here. I did try lubing the stabilizer bar of my right shift using white lithium grease pen (ACE hardware, around belas2 ringgit). This right shift keycap was sticky and would get stuck randomly sometimes, super annoying when it remains depressed. Anyway, after lubing (just a bit, less is more), the problem went away for awhile but after a week it reoccured. So I tried shaving off a little bit of the keycap's bottom inside edge using an Xacto knife (refer to pic below, NB pic isn't mine, just using it here to illustrate the part I'm referring to). Guess what, the keycap gets stuck more often! Am I doing something wrong? For now, I relubed for the time being as a stopgap measure.

Oh, and this didn't happen with the stock ABS keycaps of my Majestouch 2. It only started happening when I switched out to a set of Leopold PBT keycaps. Thicker than the stock Filco keycaps for sure, but also I think the Leopold keycaps' SS2 profile could also be a factor but not 100% sure.

Would appreciate feedback.



This post has been edited by 4lt4ir: May 30 2017, 04:21 PM

hey guys . a CC in subang jaya uses Hermes Gamdias mechanical keyboard. the feel is good. but the usability sucks for gaming.

I was playing half life LAN (yes, crossfire map ), I press W to move forward, and it seems like the key D is slightly sometimes "activated". So I really don't trust Hermes inexperience.

so question is, what's the best quality mechanical keyboard with back-light I can get for around RM300? Numpad is not required, but will be a bonus

300?
CHINAKuzumiTaiga

probably look for lower tier keyboard ba, with china switches..
Can't recommend any quality cherry mx, coz pricing over RM 300+ for backlit.

Look for the second hand mechanical keyboard, probably you can get less than 300 bucks. Go look for iKBC, CM, Filco, Rosewill, vortex, KBC, KBT, topre..
Most of the guy here start with second hand real mechanical keyboard.

My daily driver keyboard was a 3rd hand keyboard. Bought it because I couldn't afford the new 1. probably around 5 years old now. Quality board can't break easily.

Does anyone knows how to fix double click issue? The y button of my previous mech keyboard was found double click after a usage of 2yrs . Or it is literally un-fixable ?