lol ipv6 will affect can't surf certain website ??
btw my router is support ipv6, but Malaysia firmware doesn't support it
if flash global firmware then can't use, speechless TP Link

How to quietly remove free call ?
Can do it ourself ?

if you want UniFi 50,subscribe UniFi 30 now

if you want UniFi 100,subscribe UniFi 50 now

do this before 31st Dec 2016.

  only existing customer before 31st Dec 2016.but not everyone is applicable for this upgrade.one who enjoyed free upgrade before like VIP 5 to 10, can't get this free upgrade anymore.so if u never enjoy free upgrade before,just wait.maybe u are the lucky one.

Mine using speedtest through lan always go up to 28 even with the initial spike and for tm speedtest spike 30 then drop to 28.

1. When they call you, make sure to take a record of the phone number & name of the contractor that comes

2. There are 2 types of installation:
A. For Full Fibre: The free installation is free for the first 15 meter from the point where they drill a hole in your house.
B. For VDSL: The free installation is free for the first 15 meter from the telephone port on the wall of your house

If they say the 15 meter is counted from the pole, they are trying to scam you, if they do this, quickly call TM helpline at 100 and report it straight away infront of the contractor. Even if they apologize, continue with the report, request TM to send another contractor. Provide the phone number and name of the contractor to the TM helpline

3. Make sure you have TV/LCD Monitor with an HDMI port so they can test the HyppTV

Can i request them to forget about the hype tv? 

I got astro at home, enough already

I have just installed Unifi Advance 30 in my new house with an agent committed at RM179 per month without free phone call. The router i got is D-link AC1200 and I have tried the ookla speed test with phone showing 33Mbps download speed. I am not sure if it is the real line speed but it seems good to me lol

i think i did asked you from past post why did you paid..Hopefully on your next relocation installation, you'll  be wiser

In that case, will they give you the cable and stb. just in case if want to install it in the future?

Does this apply to all the other packages like unifi advance 50 and 100 as well? I do hope they dont take their action fast on this just take their time like usual will be great lol

Mine drilled through TWO walls from back room to 1st floor hall...F.O.C. they even did a very neat job installing those plastic wire casing thingy to conceal the fibre cable all the way from walls at both ends of the bedroom. (ah well..that was two years ago) 

lol...I thought you are the most sound here...yeah thanks many posters here who are willing to share.

As per your previous post quote, which is correct, normally they wont charge, if you willing to follow their easy way (with small conduit...normally plastic tubing) and drilling thru the wall to lay the length.

But once, you ask them to go over the roof or ceiling and lay to your own liking, there will be charges as the cost you had indicated. But bare in mind, its negotiable, so do negotiate.

I had one cousin who did complicated run of cable for RM200 and another for RM120 (simple over the ceiling).

Hi,

I signed for Unifi 30mbps early this year. Contract for 2 years.

Now I planned to move to another house. Can I contact them for this matter to change location etc?

Speaking based on my experience relocating UniFi 3 times:
TM contractor will insist on using their own equipment 1st for testing purposes
Once they are done, you just need to disconnect the WAN cable from the stock router & reconnect it to your WS880 lor

UniFi ID & password will remain the same unless you change account, so no configuration required on your WS880

What do you mean by that?

Means current 30Mbps subscribers get 50?

I heard from friends is Username=Operator Password=Opr@Last 4 digit of MAC address.

Example, last 4 digit of MAC address is A3B5 so password is Opr@A3B5

Hope this may help.

Just got unifi installed. Was given a Tplink archerc5 v2 wireless router. Need to enable wireless vlan to hookup hypptv wirelessly.

Problem: unable to login as 'operator'. I've used all possible passwords found on the internet (h566UniFi, Opr@XXXX, inverted username) nothing works.

Some help will be greatly appreciated. Thanks

Try username admin and password admin.